bing tracking image
  1. RV Waste Valves
  2. Valterra
  3. Single Waste Valve
  4. 1-1/2 Inch Valve Body
  5. Manual
  6. Straight Valve
Valterra Waste Valve for RV Gray Water Tank - 1-1/2" Diameter - Spigot to Hub
Valterra

Valterra Waste Valve for RV Gray Water Tank - 1-1/2" Diameter - Spigot to Hub

Part Number: T1001
In Stock
$29.39
Retail:$31.61
You Save: 7%
RV Waste Valves
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
Replaces the valve for your RV's gray-water tank. 1-1/2" Diameter passage allows wastewater to travel freely when valve is open. 1-1/2" Hub slides onto sewer pipe. 1-1/2" Spigot slides into sewer pipe. Great Prices for the best rv waste valves from Valterra. Valterra Waste Valve for RV Gray Water Tank - 1-1/2" Diameter - Spigot to Hub part number T1001 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (829)
  • Q & A (0)
  • Videos (1)
  • Photos

Valterra RV Waste Valves - T1001

  • Single Waste Valve
  • 1-1/2 Inch Valve Body
  • Manual
  • Straight Valve
  • Valterra
  • 1-1/2 Inch Spigot
  • Stationary Valve

Replaces the valve for your RV's gray-water tank. 1-1/2" Diameter passage allows wastewater to travel freely when valve is open. 1-1/2" Hub slides onto sewer pipe. 1-1/2" Spigot slides into sewer pipe.


Features:

  • Replacement valve for your RV's gray-water tank
  • 1-1/2" Diameter passage allows wastewater to travel freely when valve is open
  • 1-1/2" Hub slides onto sewer pipe
  • 1-1/2" Spigot slides into sewer pipe
  • ABS solvent cement (sold separately) required for installation


Specs:

  • Length with valve open: 8-3/4"
  • Length with valve closed: 6-5/8"


T1001 Valterra Motorhome Grey Water Holding Tank Waste Valve - 1-1/2" - Spigot x Hub




California residents: click here


Video of Valterra Waste Valve for RV Gray Water Tank - 1-1/2" Diameter - Spigot to Hub

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Checking Out the Valterra Waste Valve for RV Gray Water Tank

Today we're going to be taking a look at the Valterra RV Waste Valve. This unit simply adds or replaces a waste valve gate in your RV's waste system. It's made from a strong and durable black plastic construction. The valve's going to features 1 1/2 spigot and hub on each side, so it's going to connect between two plumbing pipes. If we take a look on this side first, we're going to go over the internal and external measurements. The internal diameter on this side it's going to measure about 1 9/16". External, outside edge to outside edge of the circular area, we're look at pretty close to 1 7/8".

Now, an 1 1/2" hub fitting is also a 2" spigot, so on this side, the internal diameter is going to be about 1 7/8". External diameter is about 2 3/8". It's also going to feature the easily accessible T-handle that makes opening and closing the gate quick and easy. That's going to be grey in color when it comes to the color of the handle. The unit is already assembled and has the appropriate seals installed for leak proof performance. If we take a look at the overall length, going this direction measuring edge to edge, we're look at a measurement of about 6 5/8". If we extend the handle out, we measure edge to edge we're now looking at about pretty close to 8 3/4". That's going to do it for today's look at the Valterra RV Waste Valve..

Customer Satisfaction Score:

Ratings & Reviews

4.8

825 reviews
Replaces the valve for your RV's gray-water tank. 1-1/2" Diameter passage allows wastewater to travel freely when valve is open. 1-1/2" Hub slides onto sewer pipe. 1-1/2" Spigot slides into sewer pipe.

by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:


25
825
Show More Reviews

See what our Experts say about this Valterra RV Waste Valves

  • Valve Setup that Could be Used with Thetford Macerator
    Hey Jason, as long as your macerator has a 1-1/2 inch diameter pipe that runs to it yes the part # T1001 is the correct valve for the purpose you mentioned.
    view full answer...
  • Recommended Replacement Waste Gate Valves For A 2015 Airstream Flying Cloud Travel Trailer
    If you're only trying to replace the gate valve and not wanting to cut any pipes then you can just unbolt the gate valves fro their mounting flanges by removing the four bolts holding them in place. You can then pull the pipes back slightly to pop the gate valve out and swap in the new one and bolt it back in place using the same bolts. You can use part # T1001VP for the gray tank and part # T1003VP for the black tank. I've attached a video below of a double waste valve I replaced where...
    view full answer...
  • Parts Needed To Make 1-1/2" Waste Valve With 3" Bayonet Outlet
    I do have a way for you to get what you want, but that's not something that's made. You'll need a few parts: Waste Valve # T1001 Adapter # T1041-1 Bayonet Adapter # T1028 ABS Glue # A05-0303 You mentioned PVC but your 1-1/2" Grey water pipe should be black ABS plastic per RVIA regulations and not PVC however. You'll connect the waste valve to hub end to your existing pipe, the adapter to the other end of the waste valve, and the bayonet adapter to that adapter.
    view full answer...
  • Trap Adapter that Can Fit Valterra RV Valve T1001
    The Valterra DMV Male Trap Adapter part # D50-3383 can slip over the spigot (small) side of the Valterra valve # T1001 that you referenced. This is designed to attach a hose directly to it. We don't have a bigger option that would fit over the hub (larger) side of the valve.
    view full answer...
  • Is There a Single Waste Valve with 1/2 Inch Hub and 3 Inch Bayonet Fittings
    I do have an option for you but the Valterra Waste Valve for RV Gray Water Tank part # T1001 is not offered with a 1/2" hub on one end and a 3" bayonet on the other end as this is not a common waste valve setup. The best option for you with this is mind is to combine the gray and black water tank valves with the Double RV Waste Valves part # T80. The combined gray and blank water tank valves are becoming very popular because they make emptying your tanks very easy. The black water should...
    view full answer...

Do you have a question about this RV Waste Valve?


Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Cole B
Installed by:
Cole B
Employee Amy B
Written by:
Amy B
Employee Wilson B
Updated by:
Wilson B
Employee Halie H
Updated by:
Halie H

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<