Is There a Single Waste Valve with 1/2 Inch Hub and 3 Inch Bayonet Fittings

Updated 03/26/2019 | Published 03/23/2019

Products Featured in This Question

Valterra Waste Valve for RV Gray Water Tank - 1-1/2" Diameter - Spigot to Hub

(840)

$29.83

Valterra ABS Solvent Cement - 1/4 Pint

(188)

$21.02

Double RV Waste Valves - Elbow - Rotating - 3" and 1.5" Hubs to 3" Lug

(330)

$53.81

Question:

I need this valve with 1-1/2” slip on one side and 3” bayonet on the other.

asked by: Larry

Expert Reply:

I do have an option for you but the Valterra Waste Valve for RV Gray Water Tank part # T1001 is not offered with a 1/2" hub on one end and a 3" bayonet on the other end as this is not a common waste valve setup. The best option for you with this is mind is to combine the gray and black water tank valves with the Double RV Waste Valves part # T80. The combined gray and blank water tank valves are becoming very popular because they make emptying your tanks very easy. The black water should be emptied first and then the gray water tank which will clean the black water residue left behind.

In order to install the new waste valve you may need to get a few elbows from your local hardware store and then you can use the Valterra ABS Solvent Cement part # A05-0303 to fuse it all together.

expert reply by: Conner L