Video Transcript for Valterra Telescoping RV Gravity Fill Water Inlet Feature Review

Speaker 1: Today we're taking a look at the Valterra Flush Mounted Telescoping Gravity Fill Water Inlet for RVs. This unit allows you to add or replace a gravity fill water inlet on your RV or camper. To open the unit and fill your fresh water tank, all you have to do is lift up on the latch, pull out, and simply pour in your water. When you're done, just close it and the latch snaps shut. The unit does feature appropriate seals internally for leak proof performance. It is a flush mount installation, so once it's installed, this is the only portion of the unit you'll be able to see.

It contains a total of four mount holes that are already drilled out. Mounting hardware is not included. These mount holes are separated on a square pattern, and they're separated on center by two and a half inches.A cutout is needed for the installation. This area right here has a diameter of around two and a half inches. The unit also has an air vent located right here.

This allows air to escape to keep pressure from building up inside the fresh water tank. That's a 3/8th inch connector for the air vent.Back here we have the barb inlet for connecting the RV plumbing to the gravity fill inlet. It starts out as a one and 3/8th inch barb inlet, and it increases to an inch and a quarter barbed inlet. Overall measurements. Going this direction, three and a half inches by three and a half inches.

It's made from a durable plastic construction that's black in color.That's going to do it for today's look at the Valterra Flush Mounted Telescoping Gravity Fill Water Inlet for RVs.