Product Experts Available Now!
Call 1-800-940-8924
Valterra Clearview Adapter for RV Sewer Hose - 3" Bayonet Fitting - 45 Degree - Clear Plastic
(122 reviews)
Price: $14.29
In Stock
Valterra
Valterra Clearview Adapter for RV Sewer Hose - 3" Bayonet Fitting - 45 Degree - Clear Plastic
Part Number: F02-3111
In Stock
$14.29
Retail:$26.86
You Save: 47%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (122)
- Q & A (0)
- Videos (1)
- Photos
Valterra RV Sewer Hose Fittings - F02-3111
- Sewer Adapters
- Sewer Hose Adapters
- Sewer Hose to Waste Valve
- 3 Inch Diameter
- 3 Inch Diameter
- Bayonet
- Clearview
- Valterra
8" Long adapter has a 45-degree angle that reduces stress on your sewer hose by keeping it from bending sharply. Bayonet end connects to waste valve, and threaded end connects to hose - no clamps needed. Clear plastic shows when tank is empty.
Features:
- 45-Degree adapter reduces stress on your sewer hose
- Adapter is angled down so that there isn't a sharp bend in the hose
- Also makes it easier to connect hose to waste valve
- Clear plastic lets you see when the tank is empty
- Threaded end secures to sewer hose
- No clamps needed
- Creates seal
- Bayonet fitting twists onto 3" lug fitting on waste valve
- Seal helps prevent leakage at waste valve connection
- Designed specifically for 3" Valterra, Grentec, Anonda, and Bristol waste valves
- 8" Long
This sewer hose adapter connects to your RV's waste valve at one end and to your sewer hose at the other. It is angled downward so that there isn't a bend in your sewer hose that could put stress on the hose. And the clear plastic makes it easy to see when your black-water tank is empty.
The adapter threads into a standard 3" diameter hose. The threading produces a seal to eliminate the need for hose clamps. The 3" bayonet fitting attaches to the 3" lug fitting on your RV's waste valve.
F02-3111 Valterra Clear View 45-Degree Motorhome Drain Hose Adapter - 3" Bayonet and Threaded Ends - Clear Plastic
Video of Valterra Clearview Adapter for RV Sewer Hose - 3" Bayonet Fitting - 45 Degree - Clear Plastic
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for What to Know About the Valterra Clearview Adapter for RV Sewer Hose
Today, we're going to be taking a look at the Clearview Threaded RV Sewer Hose Adapter. This connector is going to connect to the waist valve on your RV and it's going to connect to your hose. It's got the threaded attachment here, just threads in to the standard three inch diameter hose. No additional clamps or hardware's needed to make the fitting work. Just threads in produce a nice, tight seal. On this end, you're going to have a four prong bayonet style fitting. This is going to provide a tight, secure connection point at the waist valve on the RV.
It's got the internal seal there, which is going to ensure leak proof performance. Again, this is designed to fit a three inch diameter hose and a standard three inch valve fitting with a bayonet log attachment design. It's got the forty five degree elbow or bend in it that's really going to help reduce the amount of stresses typically placed on the hose. It's a clear material that's going to let you see when your tanks are clean and it's a very strong durable construction that's going to last you a long time. That's going to so it today's look at the Clearview Threaded RV Sewer Hose Adapter.
Ratings & Reviews
4.9
122 reviews
by:
Jeff
06/28/2019
Fast shipping and the product works as I was hoping.
by:
Bonnie
11/03/2022
Hi! We've ordered several times through etrailer and have always been very satisfied with everything! Pricing, availability and service were always GREAT! Roger goes above and beyond to be sure you are happy with the experience-great with follow up too! Thanks Roger and thanks etrailer!
by:
Gary M
07/11/2017
Product was as described and expected. etrailer service was very prompt. thank you.
(lol...come on guys....this is a sewer hose connection....hard to get excited about using it ;-)
(lol...come on guys....this is a sewer hose connection....hard to get excited about using it ;-)
by:
Ted
10/03/2022
Received the product as described and has worked satisfactiorily since installation.
by:
Dave
12/15/2021
overall not happy with this purchase but probably nothing wrong with this fitting, although it also leaked at the hose end
by:
Lee
06/06/2024
Fast shipping and great part
by:
Rick
09/21/2021
Grreat product!
by:
Richard mcdowell
01/05/2019
good service ;goodproduct,
by:
Nathan
10/19/2022
Works well.
by:
Gary
06/23/2026
by:
Veon
10/30/2026
by:
Christopher
06/11/2026
by:
Roger
04/26/2025
by:
Chris
11/08/2022
by:
Brian
02/05/2023
by:
Colleen
04/15/2023
by:
Lucas
08/10/2026
This will definitely help fairlead my new sewer hose around the usual tight right angle turn from the camper discharge port to the sewage receptacle down the side of the camper.
by:
Joe
04/23/2026
exactly what i ordered and fast shipping
by:
Phil F
10/18/2016
We use these two fittings on our class A motor home. The 5" long straight line fitting alignes the waste to the opening, so the 45 degree will be centered in the access opening. This permits the waste pump to attach in an upright position. Since the waste pump should not be run empty, I can see when the tanks are empty and stop the pump when necessary. When using the flush out, I can tell when the waste has cleared.
by:
David
10/02/2026
Everything can as promised
by:
Howard
07/18/2025
Works well along with a 2" exrension to connect my macerating pump to the RV fitting. Seals tight and is heavy enough that it won't fall apart on me.
by:
Jepp
10/07/2016
Works as advertised, clear view of the operation and rinsing of tanks, makes the whole experience easier. This 45 angle allows, in my opinion, for a better flow of the waste when compared to the more common 90 angle. Connection to a typical flex hose is fast and does not require extra clearance under the RV.
Jepp
10/11/2017
They both still work very well.
by:
Neal
05/29/2020
I had an older model of this product I use on my class A motorhome. In April during my yearly cleaning I accidentally broke it and needed a replacement. Several years ago I discovered etrailer.com as a very reliable source for parts so I didn't hesitate to go to their site. I not only found the part I needed but to my delight it has been improved since I first bought my original one about 4 years ago. The part arrived sooner than expected and I am back in business. Thanks etrailer.com
by:
Patrick R.
07/06/2016
I needed a familiar RV sewer connector and shopped for it online ... etrailer beat everybody on the price, shipped. I put in my order on the weekend and they just jumped all over it ... a little while later I got a notice it had been shipped. Even though I opted for the low-budget shipping, it still arrived during the week and in perfect condition. I guess to these guys, it isn't the size of the order that matters - they just make sure to give outstanding customer service to everyone. Hey etrailer, whoever handled my order is a 5-star ace. Many thanks for a job well done.
by:
David
10/21/2020
I added this to my 3 inch drain line that connects to my macerator pump so I can make sure the tanks are running clear. It has helped in make sure the tanks are empty and cleaned.
David
10/26/2021
it is working just as I had hoped. I used it ahead of my macerator pump so I can do a flush of the tanks ahead of the pump. they lock tight with no leaks.
25
122
true
Show More Reviews
See what our Experts say about this Valterra RV Sewer Hose Fittings
- Recommended Clear 90 Degree Fitting for 3 Inch Sewer LinesThe fitting you are looking for is the EZ Coupler 4-in-1 Threaded RV Sewer Adapter with 90-Degree Elbow Fitting - Clear # F02-3112CL. This will allow you to connect your train hose and fits 3" slip and 3", 3-1/2", and 4" threaded sewer inlets at dump station. Internal seal helps prevent leakage and the clear plastic lets you see when the tanks are empty.
view full answer... - Will The Valterra Clearview Adapter Fit In A 4-1/2 Inch Sewage Hose Carrier.Thanks for reaching out, lets see what we can find. **Valterra Clearview Adapter for RV Sewer Hose - 3" Bayonet Fitting - 45 Degree - Clear Plastic # F02-3111. This unit will be over 5 inches thick, the bayonet fitting is right at 4 inches but the elbow joint makes it to wide.
view full answer... - Threaded Fitting on Valterra Clearview Adapter for RV Sewer Hoses F02-3111All 3-inch RV sewage-related hoses and adapters we sell share a common right-hand thread configuration ("right to tight"). My contact at Valterra indicated that their Clearview Adapter for RV Sewer Hoses # F02-3111 has a standard threaded fitting that should wok with any brand of 3-inch sewage hose.
view full answer...
Do you have a question about this RV Sewer Hose Fitting?
Info for this part was:
Expert Research:
Adam R
Installed by:
Cole B
Written by:
Amy B
Updated by:
Mary K
Updated by:
Wilson B
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jeff
6/29/2020
Great, I now have several Valletta products and am happy with all of them.