Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This vent makes it easy to aim airflow exactly where you want it. The louvered grille rotates a full 360 degrees, so you can direct cool or warm air across the room instead of letting it blow straight down. It’s a simple, hands-on way to fine-tune comfort inside.
Designed for standard 4" duct openings, this vent drops right into place on a wall or ceiling. The bezel mounts flush with the included matching hardware, giving it a tidy, finished look without extra parts or complicated setup.
Made from tough white plastic, this vent holds up well to everyday use while keeping its clean look. The smooth finish blends in easily with most interiors and resists yellowing or cracking over time.
With an overall diameter of 5-1/2" and a grille that’s 4-15/16" across and 3/8" deep, it sits low and neat against the surface. The simple shape keeps things looking uniform and doesn’t draw attention away from the rest of your setup.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Randy: Hey, guys. Randy here at etrailer.com. Today we're taking a look at a four-inch vent from Valterra. This is available in the white, which we've got here, and also a brown so you can more closely match it to your vehicle, has the four inch sleeve on the back. So it's really just going to slide our duct right over that and get it secured in place. You can see it has two holes here to do that.
It does come with provided hardware. In our situation here, we just reused our existing hardware.But it provides you with an area or a way to turn and direct the air. You can see here the slats are angled, so whatever direction we have those angled, it's going to promote air flow in that direction. These aren't dampened vents, so they're not going to allow us to block off the airflow to fine tune where it's going to go inside of our coach. That's typically what I would go with is a dampen style.
I like the ability of being able to shut off a particular vent in one area if I don't need heat or air there to just make it more efficient in the other areas.But outside of that, if dampening isn't something that you're really interested in, I think it's going to do a good job.Now as another option we have one from . This is from Valterra. There's also one available from JR Products that has a ring around it. You can see in this case we don't see our mounting hardware. Pull this off.
You can see where the . So this one's going to have our attachments here and here, very similar to that, but then we've got that cover that goes over it. And that's going to give us a nicer and cleaner look. So that's up to you if you don't care about seeing the screws there. Go with that style that you do.
You can go with this style. They're both going to do a great job at getting the air directed in the direction that you want.Now for the installation portion, it's pretty straightforward. We just need to slide the vent onto the back of the sleeve here. Get those two little tabs. Just want to make sure it clips in behind that. We'll bring it in. This is a two-hole design versus the four-hole design that we took out. So we'll use one of the original holes and probably wind up making our own down there on the bottom unless one lines up. It lines up fine for us.Well, at that point it's ready for use. Let me just turn it, direct air flow wherever we want it to go. So as you guys can see, nice, easy, straightforward installation. So whether you're replacing one that's damaged or you just want to refresh the look inside of your RV, I think this is all going to be something that's going to do the job really well for you.And if you're not too particular whether you can shut the air flow off or turn it back on and if you don't mind seeing the screws, I think it's going to do a good job.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
Several of mine had broken as you can see in my picture. These were exact replacements so the change out was relatively easy. I had to use a #2 square bit to remove the existing screws, and then the old vent just came right off. I noticed the new vents came with Phillip’s head screws so I had to change bits. The one thing I did not like is that the new screws were not painted white to match the vents. So I am going to paint the old screws and put them back in. Other then that, they are great. Thanks for having what I needed and quick shipping.
They allow measurably larger amount of air flow.
This product is the exact fit for the one in our coach that was broken. Although the color is very slightly different, you would need a close comparison to notice. We are delighted.
Perfect fit
Online description and sizing was accurate. Quality product.
Item as advertised. Arrived on time and packed well
All ok. Did seem to take longer than usual to receive. But I understand backorder's.
Easy install, excellent airflow, directional fins are a plus.
I used a 4.5" hole saw to relocate a vent and all went well. The vent was perfect for our use. The beige color is what we were hoping to have. We are very happy with this mod. (We moved the heat vent from the bedroom to the living room where heat is needed while awake. The bedroom is always warm.)
I used this product in conjunction with the Mushroom Vent in order to vent my shower out thru the roof. Works like a champ.
They were a direct fit and function like the original vent. The color was a little more white than I expected, but they still match the original vinyl ceiling in my motorhome.
I was very satisfied with Valterra RV Ceiling vents
Fast delivery, good price. Web site worked great.
Have not installed yet as we just got them yesterday, but look great and fast delivery!!
It's exactly what I needed, the exact s ize.
I needed two vents for our new larger boat AC. The price and quick shipping made this a great experience
Perfect for my boat A/C.
Works great!
My order was at my door in a timely matter, packed really good and was exactly what I ordered
Shipping was slow, very slow. Ordered on 5/16 but not delivered until 5/28. Aside from that the product is exactly what I needed.
These look great! We just received them today so obviously they have not been installed but they appear to be well made and just what we were looking for to retrofit our sail boat with vented Air condition.
Exact fit for my RV. It was used on my 2000 Bigfoot motorhome for the floor registers.
Trevor
2/16/2024
Working great. They look exactly like what was in my motorhome.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Kevin
7/17/2022
Still working as expected. Good choice.