See what our Experts say about this Stackers RV Leveling Blocks

• How to Create a Larger Footprint on an RVs Leveling System for Soft Ground
  I have exactly what you will need to give the foot pads on your RV's leveling system a larger footprint for softer ground. For this, I recommend using the Stackers Leveling Blocks part # A10-0920. The Stackers blocks can be used for a variety of applications such as under the trailers wheels, under stabilizer jacks, or in your case under the foot pads on your leveling system. The best feature of Stackers has reference to its name. The blocks can be stacked to give you the proper height...
  view full answer...
  
• Availability of 5,000 lb Sidewind A-Frame Jack
  We actually only have one jack that fits all of those requirements. That is the Round A-Frame Trailer Jack # TJA-5000S-B. This is a sidewind jack with a lift capacity of 3,000 lbs and support capacity of 5,000 lbs. I wouldn't expect the jack to fail as long as you're using it as intended. If you are on enough of a slope and all of the weight of your trailer shifts to the jack you will likely have a problem. Make sure to use wheel chocks like # 288-02011-2 and leveling blocks like # A10-0920...
  view full answer...
• Stackable Leveling Block Solution for 40 ft Fifth Wheel
  Our stackable blocks like the Stackers Leveling Blocks w/ Bag for Trailers and RVs # A10-0920 would work really great for leveling your 5th wheel and would be much lighter than a concrete block. These are 8-1/8 inch square.
  view full answer...
• Can Stackers Leveling Blocks # A10-0920 Only be Used on Paved Surfaces
  You are going to have to use your best judgement with the Stackers Leveling Blocks # A10-0920. They don't have to be used strictly on paved surfaces but you also don't want to use them over a deep rut or on a steep incline.
  view full answer...
• Operating Instructions For The Stackers Leveling Blocks
  I believe you're talking about the video I have attached of the Stackers Leveling Blocks w/ Bag for Trailers and RVs - 1-3/8" x 8-1/8" - Qty 10 Item # A10-0920 where they display driving up onto multiple leveling blocks that were attached together. You should always make sure each wheel is making contact with the ground or in this case with a leveling block. Failure to do so could cause uneven stress on one axle and cause damage or even movement of the camper/RV. If you were to make a pyramid...
  view full answer...
• Does the Stackers Leveling Blocks w/ Bag for Trailers and RVs Come with Wheel Chocks
  The Stackers Leveling Blocks w/ Bag for Trailers and RVs part # A10-0920 does not come with any wheel chocks. That said, we do offer this separately using the Wheel Chock for Stackers Leveling Blocks part # A10-0922.
  view full answer...
• Will the Lippert Components 5th Wheel RV Landing Gear Foot Pad LC314667 Fit My Landing Gear Legs
  The Lippert Components 5th Wheel RV Landing Gear Foot Pad part # LC314667 is designed for the Lippert Ground Control 2.0 Electric Leveling System. The Lippert Components 5th Wheel RV Landing Gear Foot Pad part # LC362486 is designed for the Lippert Ground Control 3.0 Electric Leveling System. If you did have a Lippert Ground Control Electric Leveling System then most likely it would be the 3.0 and not the 2.0 therefore the Lippert Components 5th Wheel RV Landing Gear Foot Pad part # LC362486...
  view full answer...
• Dimensions of Stackers Leveling Block # A10-0917
  The Stackers Leveling Block # A10-0917 is 8-3/16 x 8-3/16 x 1-3/8. If you measure out to the edge of the handle on the side it is about 10 inches total. I've attached a video to assist. These are available in kits as well ( # A10-0916, # A10-0920, # A10-0918)
  view full answer...
• Do Stackers Leveling Blocks # A10-0920 Have to Be Used Under a Trailer Jack
  The Stackers part # A10-0920 can be used under jacks/stabilizers but can also be used under the wheels of a vehicle to level. I attached a picture that shows this as well.
  view full answer...
  
• Recommendations for Improving Stability of Travel Trailer at Campsite
  The stability of your travel trailer is improved by making sure your RV is level, wheels choked, and your Lippert High-Speed Power Stabilizer Jack, # LC298707 extended appropriately on a wood or block base and not the bare ground where they can sink. I suggest using the Super Grip Chock Wheel Stabilizers for Tandem-Axle Trailers, # UF21-001091 and Stackers Leveling Blocks w/ Bag for Trailers and RVs, # A10-0920. Position these beneath your wheels to level the travel trailer and under...
  view full answer...
• How Much Can the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System Raise the Trailer
  In regards to the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System part # LC358590, the front jacks have a 21" travel and the rear jacks have a 12-1/2" travel. If you need more than this then you would need to use leveling blocks like the Stackers Leveling Blocks w/ Bag for Trailers and RVs part # A10-0920.
  view full answer...
• Recommended Product for Use Under Jack Foot on Soft Ground
  Lots of RVers use wood planks to create a larger and more stable base on the ground for their jack's foot plate, especially on soft or wet ground. But instead of carrying heavy wood around with you I suggest you use a lightweight item like the Stackers # A10-0920. These come as a set of 10 and include a carry bag. You can use as many as needed under the jack to give it a larger 8 x 8-inch foot print and extras can be used for other purposes such as providing a more solid surface underneath...
  view full answer...
• Can Andersen Camper Wheel Chock and Leveler Be Used Upside Down Like a Ramp
  I suppose you could drive over the Andersen Camper Wheel Chock and Leveler # AM3604 like a ramp but I wouldn't use it that way with a heavy vehicle or with the intentions of it being load-bearing. When these are placed as a leveler the part your wheel is on will be in contact with the ground but if you use it like a ramp then the part where your wheel will be over will be above the ground with no support underneath it. Since these weren't designed to be used like this I wouldn't use it...
  view full answer...
• Option for Spreading Out Weight of Foot of Lippert Stabilizer Jack # LC298707
  There isn't a larger foot plate you could install on the # LC298707 that you referenced and the foot you did mention is for a landing gear jack set so the best option we can help with to spread out the weight on the stabilizer jack setup would be the Stackers part # A10-0920 which are lightweight plates you can use for the stabilizer jacks as well as for leveling the trailer if ever needed.
  view full answer...
• Can Lippert Components Stabilizer Jack Work On A 1987 Avion Travel Trailer?
  The Lippert Components High-Speed Power Stabilizer Jack - 30" Lift # LC298707 which includes the switch, wiring, and circuit breaker will stabilize but won't level. They will work on your 1987 Avion, but you would need to use leveling blocks like # A10-0920 as needed. The dual motor stabilizers like # UF39-941705 for 30 inch lift or # UF39-941707 for 22 inch lift are able to serve more as levelers because of their ability to individually adjust the height side to side.
  view full answer...