Video Transcript for Review of MEC Propane Fittings - Hoses - MEC82CR

Hi, everyone, Steve here with etrailer. Today we're taking a look at our MEC 10-foot-long Propane Hose. So folks, once you've connected to your regulator, you need to make a connection to appliance or just between two appliances, you have lots of different options of propane hoses. We carry 'em all here at etrailer, different lengths, different fittings on the ends. In this particular case, you've got two 3/8-inch female swivel flares that connect these two compatible 3/8-inch male flare fittings. And if you don't know, the swivel just means I turn this with the wrist to tighten it.

I'm not turning the whole hose. Makes it a lot easier to work with. And also, because both ends are flare connections, the male that connects to this, that flare will actually seal and create that seal whenever they mate together. So you don't have to use thread tape, you don't have to use sealant. But I highly recommend you check for leaks at any propane connection you ever make.

We sell gas leak detection here separately. It comes in a pink fluid, it's got a little brush applicator. You just wipe it on your connections and check for bubbles. Again, 10 feet long, 350 PSI working pressure. Both ends are brass-crimped ferrules.

So this is UL and CGA approved for propane service. The hose, again, is a thermoplastic hose. And again, 10 foot long, folks. That's gonna wrap up our look together. I'm Steven.

Thanks for watching.