Video Transcript for Double Female Cam Lock Fitting for Lippert Waste Master Review

Zach: Hey, everybody, Zach here at etrailer.com. Today we're going to be taking a look at the double-female cam connector from Lippert components. This is going to work out great for the Waste Master system. This is going to allow you to extend a couple of hoses out, or you can see how we have it in this setup today. I have the tote tank adapter because we have a bayonet fitting on here where Waste Master uses the cam system. This will allow us to hook up two hoses of this variety so we can extend those out.

So really easy to use. We just simply insert one end of our hose, and then we can put those down and then bring this other one in, and then we're good to go. We have a full connection there. This is going to be a really nice seal. This is a time-tested way of connecting hoses together for any sort of disposal of your tanks or liquid transportation.

This is very good way to get those connected.The overall length is going to measure at eight and nine-16ths of an inch. And then if we remove these, you can see there, this is pretty easy to use and just pull those out. I like that those rings are included, but then also those rings allow you to attach your end caps there when not in use. Then we can get that secure. Get that cam down, and then we can do the same thing on this back side.

You can see there, those rings sometimes get in the way of one another, but I think that having something to give good grip when you're undoing them or putting them down is worth it.Then we can put this in storage until it's time to use it again. But if we take this off, we'll get a look at the inside there. You can see how that works there, as those get pushed down, that locks it in place. So this is a really nice secure way, really good components in there, nice seal all the way around.Now the measurements on the inside right here on both sides is going to measure at three and a half inches, and it's going to work out great for all your Waste Master hoses. But overall, I think this is an excellent way to give us a nice secure fit.

If we're looking to add some additional hose. If you have to park a little bit further away from one of those dump stations, or you need to adapt to a bayonet-style fitting, this is going to be a really good way to do it. But that's going to do it for our look at the Lippert components double-female cam connector..