Love to DIY? You can use this trim kit, a rail kit (sold separately), and plywood bottom (not included) to build a tray that perfectly fits your RV cargo compartment. The end pieces prevent your gear from sliding off on the way to the campsite.
Features:
Specs:
Pair this tray trim kit with a rail kit (sold separately) and a carpet-covered plywood bottom (not included) to create a complete slide-out tray for the cargo compartment in your RV or camper. This is perfect for you if you're a DIY'er or if you have a uniquely shaped compartment that wouldn't fit a pre-made tray.
Determining Which Tray Trim Kit You Need
To make sure your tray has the clearance it needs to slide in and out, measure the width of your cargo compartment opening, and then subtract 4. So if your cargo compartment measures 36" wide, this 32" trim kit is what you need. If your cargo compartment is wider than 32," you will need a SuperSlide II tray trim kit.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer.com. Let's take a real quick look together at this Kwikee tray trim kit. Now this trim kit is going to pair with a rail kit, which is sold separately to form a slide-out tray for your RV or camper's cargo compartment. This is going to require a carpeted, covered plywood, which, again, is not included with this, for the bottom to let you store and retrieve camping and hiking gear, tools and power cords, all without crawling into the compartment. Now this is going to fit cargo compartment openings as you see there on your screen of 36-inches wide. And then when you have this fully assembled, the tray weight capacity is gonna be 200 pounds.
And these two end-trim pieces are going to help prevent your belongings from sliding off the tray during travel. And then just to give you some measurements, let's begin with the larger trim piece first, and I just wanna give you the overall length here. So, end-to-end, as you can see there, we're sitting right at 32-inches long. (measurer clicks) And then the height and the width will be the same, so an inch and three quarters. And then looking at the smaller piece, this is going to have the same length, so, again, 32-inches long.
And then the height is going to be right at about 1 9/16 inches tall. (rail clangs) And then the width we're lining up this way. Hopefully you can see that a little bit better. We're gonna be sitting pretty close to a little over an inch, about 1 1/8 inches wide. (measurer clicks) So both of these do feature a durable steel construction (knuckles tapping) with a textured powder coat finish that's going to help resist rust and corrosion.
This is going to be a pretty easy rivet-mount installation, but the rivets are not included, so that is something that you would have to pick up separately from this kit. Well, that's gonna wrap up our real quick look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
.
Ratings & Reviews
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.