Product Experts Available Now!
Call 1-800-940-8924
Single Rocker Switch - Labeled On/Off - SPST - Black
(21 reviews)
Price: $7.52
In Stock
JR Products
Single Rocker Switch - Labeled On/Off - SPST - Black
Part Number: 37212595
In Stock
$7.52
Retail:$7.94
You Save: 5%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (21)
- Q & A (0)
- Videos (2)
- Photos
JR Products RV Light Switch - 37212595
- Single Switch
- Black
- Rocker Switch
- On/Off
- JR Products
- Cover Plate Not Included
Single on/off switch for controlling lights and other applications powered by your battery. SPST, 16 amps at 125V, 12 amps at 250V AC, 3/4 hp at 125V - 250V AC, 10 amps at 14V DC. Fits cutouts measuring 1-1/8" tall x 1/2" wide.
Features:
- Single on/off switch for controlling lights and other applications powered by your battery
- SPST, 16 amps at 125V, 12 amps at 250V AC, 3/4 hp at 125V - 250V AC, 10 amps at 14V DC
- Cutout dimensions: 1-1/8" tall x 1/2" wide
- Switch dimensions: 1.2" tall x 0.54" wide
- UL/CSA/VDE/RoHS approved
- Black color
- Made in the USA
12595 JR Products Replacement Single Rocker Switch - Labeled On/Off - SPST - Black
Video of Single Rocker Switch - Labeled On/Off - SPST - Black
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Feature Review Single Rocker Switch-37212595
Hi everyone, Aidan here with etrailer. Today we're gonna be taking a look at our single rocker switch from JR Products. What this is gonna do is provide a switch for your different accessories, whether it be something like a light and a camper shell like this. This is going to give you that control. So we wire this to our battery and to our accessory and it gives us a simple on and off to control that light or other accessory. Let's check it out.
So the packaging does come with a small wiring diagram. It's very simple. You're gonna have two tabs. The one located in the center is our positive. That's what's going to connect to our battery.
And then the one on the bottom is for our load. That's what connects to our accessory. In our case, the light. You will need some spade connectors to get your wire attached and then it also doesn't include any wiring so you need to pick that up yourself. And as far as mounting the switch goes, you can put it wherever you see fit for your application but it does include some dimensions for that cutout.
So in terms of height it's going to be one and one eighth of an inch. And in terms of width, it's going to be half an inch. So make a cut wherever you're gonna put it like that. In our case, it was just this small plastic panel so I used a dremel tool to cut it out. And then you just push it in and you'll hear those tabs snap in for a really smooth mounting.
And the outer edge of that switch does have a small bevel so it hides all the uneven cuts and gives it a very clean look. So if you've got some DIY projects that you're looking to do, like some lights and a camper shell or under a tonneau cover, then this is a great way to control those. It's a pretty simple install process and all you need to do is figure out where you're gonna use it. I'm Aidan, thanks for watching.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Did not arrive in time
Ratings & Reviews
4.8
21 reviews
by:
Robert
12/02/2024
Exactly what I needed
by:
Milton
07/21/2020
2nd time of making a purchase, delivery was timely and and I love the short installation video that comes with them.
by:
Gary
03/13/2025
Switches fit and work perfectly
by:
Deborah
07/10/2021
Description of the part was perfect so I knew exactly what I was ordering. Shipping was prompt and delivery as expected. Excellent service! A vendor I’ll trust to return to for any RV needs.
by:
Ashley
12/09/2021
I had a few stuck switches that I needed to change for the customer. Switches installed very easy.
by:
Kevin
05/28/2023
Not a perfect fit for my application but I made it work. And it's still working one year later.
by:
Brian
09/11/2022
Perfect part. Exactly what I ordered and works great.
by:
Rick
08/05/2026
by:
Phillip
05/13/2024
Appreciate the prompt delivery and the availability of hard to find parts.
by:
Derek
02/12/2024
Perfect
by:
Paul
10/04/2024
Perfect fit! I will be ordering from you again when needed! Got my order quickly!
by:
Chantell
11/17/2022
Exact product I needed. Arrived in a very timely manner!
by:
Dallas
06/24/2023
by:
Robert
09/22/2022
by:
Robin
10/06/2025
by:
Michael
12/26/2024
by:
John
09/12/2021
by:
Daniel
07/07/2024
by:
Tim
08/26/2020
by:
Archie
10/06/2022
by:
Kimberly
04/24/2024
21
21
true
See what our Experts say about this JR Products RV Light Switch
- How Can I Power Off My Converter When I am Using an Extra Inverter Instead of a Generator?Hello Jim, It sounds like you’ve done a fantastic job setting up your camper with an inverter, and you’re asking a really smart question. Since your camper has a Progressive Dynamics PD4060, you’re right to want to stop the converter from running when you’re on inverter power. Otherwise, the converter would take the 120V power made by the inverter and turn it back into 12V to charge the batteries, basically creating a pointless loop and wasting battery power. The easiest way to disable...
view full answer... - Rocker Switches Compatible With JR Products Double RV Switch Faceplate # 37212885 The Double RV Switch Faceplate # 37212885 has a 1.125" tall by 0.55" wide cutout. This will allow you to use any of the following switches below. Single 12V Rocker Switch - On/Off - SPST - Black # 37213405 Single Rocker Switch - Labeled On/Off - SPST - Black # 37212595 Single Labeled Rocker Switch - On/Off - SPST - Black/Red # 37213655 Single Rocker Switch - 120V - On/Off - SPST - Black Plate with Red Illuminated Switch # 37212515 Single Rocker Switch - 12V - On/Off - SPST - Black Plate...
view full answer... - Does The ThermaHeat RV Holding Tank Heater Pad Require Special Wiring You'd most likely be fine just using some # 16-1-1 with the standard casing but you could also get some wire with exterior rated jacketing if you wanted to go the extra step. You can also get some wire loom # 7509-10 and run it the length of the wires and use electrical tape to secure it. When installing the ThermaHeat RV Holding Tank or Step Heater Pad w/ Thermostat # 277-000164 you'll also want to use a switch like # 37212595 to be able to turn it off when not needed to avoid an unwanted...
view full answer... - Can A RV Push Button Switch Be Swapped to a Rocker Switch?I'm not certain, but If I had to guess it'd probably come down to cost. It's probably more cost effective for the manufacturer to buy push button switches that are pre-wired rather than rocker switches. With that said, the push button switch like # DG52452VP is just a 12v on/off switch, so you could totally swap it with a rocker switch like the Single Rocker Switch # 37212595. If you wanted to go a step further I recommend pairing that with the Single RV Switch Faceplate # 37212855 for...
view full answer... - On/Off Switch for a KiB Services PanelThe Ventline # BL0108-00 switch you referred to is very similar but fits a cut out hole measuring 3/4" X 1/2" instead of the 1" X 1/2" sizing that you want. The closest items we carry are, JR Products # 37212595 uses 1-1/8" X 1/2" cut out (very close) JR Products # 37213405 uses 1.125" X 0.55" cut out (not as close)
view full answer... - Replacement 12 Volt On Off Rocker SwitchYes we do have them. I personally prefer the Universal-Design Rocker Switch - SPST - On-Off - 12 Volt - 20 Amp - 3-Blade - Red Pilot Light # PK34360. The red indicator light lets you know if it is on or off from a distance. If you like the simple standard look we have the Single Rocker Switch - Labeled On/Off - SPST - Black # 37212595. It doesn't have a light indicator it is just labeled with ON/OFF. We also have the Single Rocker Switch - 12V - On/Off - SPST - Black Plate with Blue Illuminated...
view full answer... - Is There an Available Exterior 110v/120v Light for 1996 Rockwood 2307 Pop Up CamperI have a solution for you, but the Optronics LED RV Exterior Scene Light # UCL41CB is designed to work on 12v power only, so it's not going to work on a 110v/120v feed. Unfortunately all of the lights we've got for this application are going to be 12v lights. With that said, if you have a battery on your camper, you could run the wiring for the # UCL41CB to the battery and power the # UCL41CB that way, so you'd have a 12v power source. You would want to install a switch like the Single...
view full answer... - What Size Terminal Connectors Are Used on the Single Rocker Switch 37212595The width of the prongs that you would connect the wires to on the Rocker Switch # 37212595 are 1/4" wide, so you'd need 1/4" terminal connectors.
view full answer...
- Will Back Up Sensors on 2016 Toyota Sienna Need to Be Disabled When TowingActually, you really shouldn't need to do anything with the sensors because they'll only activate when the vehicle is in reverse. If you find that having them sound while your backing is annoying, you can install a switch such as # 37212595 inline with the power circuit feeding the sensors so you can turn them on and off as needed. You'll need to trace the sensor wires from the bumper, and locate which wire in their harness carries power. Install the leads for the switch inline on that...
view full answer... - Parts Needed to Install Westin Off Road LightsThanks for your purchase of the Westin Sportsman Grille Guard # 40-3825 for your 2017 Toyota 4Runner! In order to install the MaxxTow Off-Road Lights # MT80637-2 on the grill guard you need a power source, wiring, a switch, and some connectors. For the power source I do recommend using the Firestone Fuse Circuit Tap Kit # F2526 because it will help to protect your wiring. If you don't go this route then you'll have to place a fuse or circuit breaker on a power wire that's hooked up to...
view full answer...
Do you have a question about this RV Light Switch?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Kathleen M
Installed by:
Aidan B
Video Edited:
Dustin K
Written by:
Mike S
Video by:
John S
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Robert
12/3/2025
Still working