bing tracking image
  1. RV Waste Valve
  2. Valterra
  3. Single Waste Valve
  4. Manual
  5. 2 Inch Valve Body
  6. Straight Valve
Valterra Waste Valve for RV Holding Tank - 2" Diameter - Spigot to Hub
Valterra

Valterra Waste Valve for RV Holding Tank - 2" Diameter - Spigot to Hub

Part Number: T1002
$24.92
Retail:$26.98
You Save: 8%
RV Waste Valve
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Need help with installation?
Locate installers near me
Replaces the valve for your RV's holding tank. 2" Diameter passage allows wastewater to travel freely when valve is open. 2" Hub slides onto sewer pipe. 2" Spigot slides into sewer pipe. Great Prices for the best rv waste valve from Valterra. Valterra Waste Valve for RV Holding Tank - 2" Diameter - Spigot to Hub part number T1002 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (916)
  • Q & A (0)
  • Videos (1)
  • Photos

Valterra RV Waste Valve - T1002

  • Single Waste Valve
  • Manual
  • 2 Inch Valve Body
  • Straight Valve
  • 2 Inch Hub
  • 2 Inch Spigot
  • Valterra
  • Stationary Valve

Replaces the valve for your RV's holding tank. 2" Diameter passage allows wastewater to travel freely when valve is open. 2" Hub slides onto sewer pipe. 2" Spigot slides into sewer pipe.


Features:

  • Replacement valve for your RV's holding tank
  • 2" Diameter passage allows wastewater to travel freely when valve is open
  • 2" Hub slides onto sewer pipe
  • 2" Spigot slides into sewer pipe
  • ABS solvent cement (sold separately) required for installation


Specs:

  • Length with valve open: 10-1/4"
  • Length with valve closed: 7-3/4"


T1002 Valterra Motorhome Holding Tank Waste Valve - 2" - Spigot x Hub





Video of Valterra Waste Valve for RV Holding Tank - 2" Diameter - Spigot to Hub
Video Thumbnail Video Player Dialog

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of the Valterra Waste Valve for RV Holding Tank

Today, we're going to be taking a look at the Valterra RV Waste Valve. This unit simply adds or replaces a waste valve in your RV's waste system. It's made from a very strong and durable black plastic construction. The unit's going to feature a 2" Bladex valve, see right here, how we can easily open and close that gate The valve is going to feature a 2" spigot and hub. The internal measurements I want to give right here, for the diameter on this side, that's going to measure 2", external diameter is 2-3/8". Here on this side, internal is 2-3/8", external is right around 2-11/16", almost 2-3/4". That's going to feature the easily accessible T-handle that's going to make opening and closing the gate quick and easy.

Color of the handle is black. The unit's already assembled, and it's going to have the appropriate seals installed to offer leak-proof performance. I want to give you the overall length measurements with the unit in the closed and open position. Measuring this direction, that's going to give us a measurement pretrty close to 7, around 7-3/4", and this with it open, overall length, that's going to give us a measurement of right aroun 10-1/4". That's going to do it for today's look at the Valterra RV Waste Valve..

Ratings & Reviews

4.8

916 reviews
5 Stars
(782)
4 Stars
(96)
3 Stars
(17)
2 Stars
(6)
1 Star
(15)
Review Sort Icon
by:
I suppose it will work ok after finally getting it. Haven't installed it yet. Arrived yesterday. Went from your facility to St. Louis, then to Memphis, then to Shreveort, then to Peoria, Il, then to Chicago, Il, then to Dallas, TX, then to Shreveport, La and finally to me in West Monroe, La. Lousy Post Office service.
by:
Great replacement for 40+ year old OEM supplied valves on RV. Dimensions are different than original valves and required slight modification of plumbing connections.
by:
Exactly what we needed to repair our grey water system. Product fairly priced and came quickly, well packaged and undamaged.
by:
Excellent service & very quick shipping.
by:
Excellent customer service
by:
Seems fine but I won't be using it
by:
Good fit
by:
Will work
by:
by:
by:
Thanks just what I need.
by:
The product and price are great. Etrailer had a miss on shipping.
by:
I got this to avoid the residual grey water splash upon taking off the drain cap. It worked for that, but then the lugs broke so I threw it away.
by:
Delivery was 2 days ahead of time and correct part. Great quality.
by:
This was an easy install and does prevent any leaks from the black tank or grey tank valves (if they leak) from escaping when the dump cap is removed to hook up the dump hose. I noted that the new valve can be removed without too much effort; however, there is a pin to insert in one of the bayonet hooks to prevent this from occurring. I think it is robust enough not to break while experiencing the vibrations during travel. If I do get concerned, I will supplement the bayonet connections with some tape or other means. I also noted that the dump cap installed on the end of the new Valterra Twist On valve twists off a bit easier than the cap on the original dump tube. I took the dump cap off several times to see if the new Valterra valve would twist off instead of the cap. This never happened; however, given I only need one hand now to twist off the cap, I will probable always hold the valve when taking off the cap to prevent the valve from possibly twisting as well as to relieve any stress I might put on the pin at the connection point. To verify the new valve connection was leak tight, I put water in the grey tank and opened the grey tank valve with the new Valterra valve closed. There were no leaks. The Valterra valve is installed on a Class B van with low ground clearance. Given the handle can swivel to provide flexibility, I will probable secure the handle to the undercarriage of the van to prevent the handle from swiveling down and possibly reducing ground clearance. I don't know if this would/could happen, but I don't want to find out the hard way. Overall, I'm very satisfied with the purchase.
by:
It’s a nice valve. I would like it better if there was someway to lock the handle at a given orientation. For instance, I’d like the pull handle to remain in the 3:00 position. Unfortunately I can’t figure out how to do that as it will rotate after being installed.
by:
etrailer customer service is exceptional. They shipped me the wrong item. However, I called on Saturday they immediately sent the correct item and I had it on Wednesday!!! Then they called to confirm the problem was resolved and I was satisfied.
by:
Using this attached to my Y on the Black and Grey connection. It works great! Heavy duty! Worth the money.
by:
Etrailer seems to be the only company that I can get things for my trailer at a reasonable price and reasonable time. Thank you guys!!!
by:
Excellent product. Had to wait awhile but well worth the wait. Been having trouble with black tank valve leaking by. Called and it would be July until our dealer could check it out. This will be a permanent fixture on my Fifth Wheel. Thanks etrailer for getting it to me.
Jimmy profile picture

Jimmy

5/19/2022

Still doing great!

by:
The product really helps with my dump station duties. At age 81 I find it hard to reach the tank valves which are way under the trailer. This unit extends the valve assembly and makes it easier to reach. I have had a problem with attaching a built in position clamp which is behind the unit. Consequently, the unit has a tendency to rotate and is not locked in position. This problem is easily solved if I lie down under the trailer which I don't want to do. I'm glad I bought this valve because it solves the problem of ease of use for me.
by:
Easy, cost effective solution to leaky sewer valves. No more 'surprises' when removing valve cap.
David S. profile picture

David S.

11/15/2017

Item has been in service for a year and still works great! No more surprises when opening sewer valve cap.

by:
Unfortunately, I was not pleased with the gate valve. It immediately broke as soon as I opened the package.
by:
Nice addition to my dump valves. Provides another safety tool to prevent spills or leakage.
by:
Great replacement for the shutoff I broke off on a mountain fire road. Easy to install.
25
916
true
Show More Reviews

See what our Experts say about this Valterra RV Waste Valve

  • Does the Valterra RV Waste Valve part # T1002 Come with Flanges on Both Sides
    What you see in the product picture for the Valterra RV Waste Valve part # T1002 is what comes with the product. On one side is a flange that is 2 inch inner diameter and on the other side a flange with a 2-3/8 inch inner diameter. Check out the review video for this part for more info as well.
    view full answer...
  • Replacement Gray Water Valve for Valterra System with 2 Inch Diameter Pipe
    We have some options for you. I've got the 2 inch fit you are seeking. I recommend taking a look at the following options to determine the correct fit for your trailer since I don't know what you are connecting to. Valterra Bladex Waste Valve Body for RV Holding Tank - Aluminum Handle - 2" Diameter # T1002VPM Valterra Bladex Waste Valve for RV Holding Tank - 2" Diameter - Hub to Hub # T1002B Valterra Bladex Waste Valve for RV Holding Tank - 2" Diameter - Spigot to Spigot # T1002A Valterra...
    view full answer...

Do you have a question about this RV Waste Valve?


Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Cole B
Installed by:
Cole B
Employee Amy B
Written by:
Amy B
Employee Mary K
Updated by:
Mary K
Employee Wilson B
Updated by:
Wilson B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924