1,500-Watt inverter lets you use appliances and devices wherever the road takes you. Pure sine wave technology is perfect for sensitive electronics like HDTVs and computers. Changes your RV battery's DC output into clean AC power.
Features:
Specs:
This 24V inverter changes DC output from your RV batteries into AC power so you can plug in tools and appliances. Using pure sine wave technology, it creates clean power with low distortion, making it safe, efficient, and perfect for sensitive electronics like computers. Plus, the inverter can generate 2,650 starting watts and 1,500 running watts which is a great fit for appliances and electronics.
The inverter includes 2 GFCI outlets for AC loads, positive and negative DC input terminals that connect to your batteries, and a port for a fixed-mount remote (sold separately). It has a function switch that lets you select different output voltages (100V, 110V, 115V, and 120V) and frequencies (50Hz and 60Hz). This switch can also turn the power saver on and off. Additionally, the power saving adjustment dial near the function switch sets the input and wake up thresholds for the power saver.
The system includes a number of safety features. It offers protection from over/under voltage, overloading, and overcurrent. The inverter also uses a heat sink process to protect from extreme temperatures, and an internal cooling fan removes excess heat from the unit.
For additional safety, installing a fuse between the battery bank and the inverter will protect your equipment from power surges. The Go Power 200-amp fuse block (sold separately) works with this unit and uses a slow blow time-delay feature to withstand surge current. This means it can handle short surges over 200 amps without blowing the fuse, which is great for devices with motors that require more energy to start.
The inverter mounts inside your RV in a dry location with ventilation. It should be installed in close proximity to the battery bank, but not in the same compartment. The DC terminals are wired to the battery bank.
There are 2 fixed-mount remotes (sold separately) that let you monitor and control the inverter from inside your RV.
For a simple, no-frills option, the Go Power GP-SWR-A Inverter Remote lets you turn your inverter on and off from inside your RV. It also has a LED which indicates the inverter's status.
For additional features, the Go Power GP-ISW-R-24 Inverter Remote provides LED indicators that display the voltage, output power, inverter status, power saving mode status, and fault conditions. It also has a power button that controls the inverter.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're going to take a look at the Go Power 24 Volt 1500 watt industrial pure sine wave inverter. Now this inverter will convert your incoming DC battery power to a usable AC household power wherever you go. It's an industrial pure sine wave inverter to offer an exact replica of AC power for your portable electronic equipment. This is perfect for medium sized loads like electronics or small kitchen appliances and it will run any device in the wattage range without interference.It is a nice, lightweight, low profile design. On each end, I'm going to describe the features here. Right here you'll have your on and off switch.
In the middle you can see it has the dual ground fault AC outlets. Over here there's a power save function switch, right next to the power save adjustment mode. Underneath there's three LEDs, these are the function LEDs.On the other end, you'll have your, right up here, the remote control port and terminal right underneath. Chassis ground right here and right here is your DC input connectors. Now the terminal covers I've already installed just to show you how they look when they're installed on the inverter.Now, this will give you full overload protection.
It is compatible with 24 volt systems. The continuous output power on this is 1,500 watts. Peak surge power is 2,650 watts. AC output voltage is 100 volts to 120 volts. Input voltage range is 21 volts to 33 volts DC.
The AC output wave form is pure sine wave. Maximum efficiency on this is 92%. Now the battery drain with no AC load is less than or equal to 1 amp. Also offers a low battery alarm and low battery shut down.It does include everything laid out here on the table. The inverter itself, the two ring lugs that'll attach to your battery cables, allow you to attach to the inverter right here.
The DC terminal covers you can see. I've already installed those. And a nice users manual that will describe how to install everything and how it operates.Weight on this is just over nine pounds, about nine point one pounds. The dimension on this, this length of it from this end and we're going to include the terminal cover's, going to be 16 and 9/16ths of an inch long. The width from the bottom here where it mounts will be nine and three-quarter inches wide and the depth will be from the bottom to the top, right at three and a quarter inches deep.But that should do it for the review on the Go Power 24 Volt/1500 watt industrial pure sine wave inverter.
Do you have a question about this RV Power Inverter?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.