Video Transcript for Detailed Breakdown of the Yakima SkyLine FX Crossbar for Fixed Mounting Points

Hi, Matt with etrailer, and today we're gonna talk about the Yakima SkyLine FX roof rack bars. So this gonna be a great option for you if you're looking for a system that's gonna be really easy to take on and off, and you have flush rails. So let's take a closer look at it. Now, this is gonna be able to fit multiple-sized roofs because these do have the ability to expand. You just have to plug in your vehicle into our fit guide and find out what's gonna be the best fit for you. The main appeal of this is how easy it is to take on and off your roof.

Now, you'll just have to make sure you take off all these caps. I've already removed the ones from the passenger side. As you can see right here, with everything removed like that, you just lift up on it, and it pops right off. Putting it back on is just as easy, just sliding on that end cap to finish it off until it clicks into place. Now, we take a closer look at the Yakima system.

Now, the bar itself is gonna use our Yakima JetStream bars that are gonna attach to these towers. And since this design is made this way, this is gonna be a flush-rail system. So what that means is we're not gonna have any overhang, so that's gonna give you more of a clean finish to your system, but it's also gonna take away some real estate of where you can put accessories on top of your bars, too. Now, since this it is a flush-rail system, we're only gonna be able to put our accessories in from one area. That's gonna be this center part on our crossbars.

And you're just gonna plug in whatever T-track accessories you have and slide it in through this channel. Now, what I like about this is it's gonna have this built-in rubber weather strip, and what that's gonna help do is reduce wind noise and keep any debris out of here. And what's really great about this weather strip and is that you don't have to cut this down to size since it is built in. Taking a closer look at the SkyLine towers now, if I just remove this end cap, which gives it that really nice clean finish to it, we can take a closer look at the hardware inside of it. Now, you'll notice we have this access door, and that's gonna lock everything down into place so no one can take this off real quick.

Now, I will say the lock core that we have on here is just a plastic lock core that you can unlock with a screwdriver or with some quarters. So it's not really that secure. Anybody could come by and take it off real quick. What I'd recommend doing is going to our website and checking out some of the Yakima lock cores that we have. And those will be metal lock cores that you can get keyed to lock to any of your other Yakima accessories, too. To take a closer look at the hardware underneath here, I'm just gonna unlock this access door, open it up. Now you'll notice we have two bolts in here. We're gonna have one on top, and that's gonna adjust your pitch. The way you'll adjust that is with an included Allen key. You just tighten and loosen that up. And what that's gonna do is change the angle of the crossbar itself to accommodate different types of roofs. If you are someone who's very particular on how this fits on your roof, then that's gonna give you more control. And the other setting we're gonna have in here is gonna be this bolt that adjusts your length of your crossbars to fit on top of your roof. So just to give you an example of that, what that's gonna look like. You just have to lift this up some, close that back in. You can even access it even with the access door closed. Loosen up that bolt some until it's loose enough to adjust. And once it is, then you can see how it telescopes, just like that. Now, I know we've been talking a lot about how this is gonna lock into place, and that's gonna lock into place to your fit kit. And you can find what's gonna be the best one for you using the fit guide on our website. Something that I really like about this design as opposed to some of the other Yakima crossbars is just gonna be how sleek it fits up here. You don't have to worry about anything that's bulky, hanging off the sides of it, and just how those towers fit onto those crossbars, it's just gonna give you an overall better look. Now, you're gonna have a weight capacity of up to 165 pounds, and what I recommend doing is just checking what your roof is rated for so you don't overload it. But if you liked everything you saw today, that's just a look at the Yakima SkyLine FX roof rack bars. Thanks for watching.