To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Nothing ruins a long drive like the constant whistling from your roof rack. The Rhino-Rack RS 2500 keeps things quiet with its slim, elliptical Vortex Aero crossbars. Each bar has built-in rubberized Vortex strips that disrupt airflow and cut down on wind noise and drag. You get a smoother, quieter ride without needing an extra fairing—just clean aerodynamics that make highway miles more enjoyable.
Bulky roof racks can look like an afterthought. The RS 2500 keeps things simple with a flush design where the bars don’t extend past the legs. The result is a seamless, from-the-factory look that blends into your roofline. The matte silver finish and low-profile shape add to the clean appearance while also improving aerodynamics by reducing drag.
When you’re hauling kayaks, camping gear, or a cargo box, you need bars that won’t flex or rust. These lightweight, structural-grade anodized aluminum crossbars have internal H-shaped extrusions for exceptional strength while staying corrosion resistant year-round. The rack supports up to 165 lbs when used within your vehicle’s roof load limits, giving you reliable strength for everyday hauling and big adventures alike.
This setup makes gearing up easy whether you prefer channel mounts or clamp-on attachments. Each crossbar has a built-in C-channel that fits channel-mounted accessories like bike racks, watersport carriers, or ski racks. The three-piece Vortex strips pop out where needed so you can mount your gear and then close them back up to keep things tight and quiet. Clamp-on options work just as well, resting securely on the rubberized surface for added grip and cushioning.
Leaving your gear unattended shouldn’t be stressful. Each support leg on the RS 2500 has locking covers that secure both the rack and any accessories mounted in the top channels. The sturdy nylon covers give a finished look while deterring theft, and all locks are keyed alike so one key handles everything.
Alternate Instructions
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today were going to be taking a look at the Rhino Rack Vortex Aero Custom Fit Roof Rack System. Rhino Rack makes a variety of custom fits for different vehicles out there so to see if we have one for you just refer to our website, etrailer.com. One of the great advantages about the Rhino Rack Custom Fit Roof Rack System is that it comes with everything that you need for a complete roof rack. You have your bars, you have the legs. You have the custom fit. This is the clamp that goes around the roof line your vehicle. These are your pads that also go around that top portion of the roof line. You have some extra ridged strips that can replace any ones that you may damage due to whatever accessories that you want to put on there.
Youve got the tensioning tool and then you also have the end caps that go on the legs. These do come with four keys so you can lock each one of those on there securing your roof rack to your vehicle and also securing your accessories on your bars. The bars are going to offer a quiet low profile design. Theyre sleek and aerodynamic. Theyre going to be very strong, quiet and help maintain your fuel efficiency. Each bar features the rubberized vortex strips placed in the crossbars top channels. This is going to help reduce wind noise and drag.
A couple other features that those strips do is it really helps keep out the dirt and grime out of the crossbars. Its going to provide some extra cushion and slip resistance for whatever cargo you have onto your roof rack. We have the built in top channel on each bar. Thats going to let you add channel mounted carriers and accessories. Just slide back this cap here and then you can lift that up and you can place in the T-slotted carriers or accessories. Another thing that you can do is you can actually just make small incisions in here just enough to fit that accessory clamp up in there and that way you dont have to remove or cut any of your strips. It does come with some replacements.
These bars will also accommodate most clamp-on accessories. Today were going to be demonstrating this roof rack system using the silver bars but these are also available in black. Each bar is made from lightweight structural grade anodized aluminum. Its going to make them very durable and its also going to keep them resistant against rust. The bars feature an internal H-shaped extrusion. Its going to help provide exceptional bar strength throughout the entire bar. One of the great features about this roof rack system is that it pretty much comes all the way pre-installed. The legs are already attached to the bars all you need to do is attach the pads to the legs and the clamps.
Now what makes this custom is that each pad is designed to fit the contour of your roof line. Thats a great feature to have. Also each clamp is designed to fit the contour of your roof line as it goes around the door jam. They have nice pads right here and a little L-shaped bracket so its not going to scratch or scuff your door jam. Now were going to go ahead and show you how to assemble the fit kit to the crossbar system. We will be using our instruction guide. This is going to assure us that we place each pad in each clip in the right spot to best fit our vehicle. We went ahead and assembled three kits to three of our legs. Now here on our fourth one we want to go ahead and show you how to assemble it. Couple things to look for: each leg has a sticker on the inside thats going to tell you the placement of that leg. Right here it says RL thats for the rear left side of our vehicle which would be our drivers side. Theres also an arrow indicator here on our foot. These do detach very easily so we always want to make sure that the arrow indicator is pointing out away from our vehicle. Here on the pad we also have an arrow, if you can see that its right there on the pad. We always want to make sure that arrow is pointing towards the front of the vehicle. The pad just keeps into place and just like that thats installed. Then all we need to do is take our clip, this is going to go around our door jam and the bolt is going to thread into this portion here. Well take that and get the thread started. Were now ready to get the roof rack system onto our vehicle. To install the front crossbar were just going to go ahead and open up both front doors. Well then grab our front bar and place it onto the front part of our vehicle. To make sure we have this in the correct spot we need to take a measurement from the center of our door jam to the center of our leg. That measurement needs to be 250mm or 9-27/32 of an inch. Were going to line up here at the door jam of our vehicle. Were going to measure out. Were just going to try to get it in the right area and then we can adjust it as needed. Well move to the other side and repeat that same process. Doing this measurement on both sides of the vehicle just ensures that our feet are in line with each other. Its also going to help ensure that when we install the rear bar that both bars are parallel with one another. With both of those in place well go and tighten everything down. Well take the included tension tool, place it right there on the bolt and then we just want to snug one side down and then well move to the other side and tighten that up a little bit to see how that custom fit really fits nicely around the door jam of the vehicle. Now well go back over to our passenger side and well tighten some more. You can see here that the tension tool has a small curve to it. When you have everything tightened down enough thats actually going to become straight that way you can ensure yourself that you dont over tighten it and damage the finish on your vehicle. Now well go ahead and install the rear crossbar. First thing that we need to do is open up our rear doors. Then well grab our rear bar and place it onto the rear part of our roof. Now to ensure we have this bar in the correct location well need to do another measurement. That measurement is going to be 700mm or 27-9/16 of an inch. Were going to measure from the center of our front bar to the center of our rear bar. Please keep in mind that this is a custom fit and these measurements apply to this vehicle so the measurements will vary for your specific vehicle. Well go ahead and snug this side down and then we dont want to over tighten too much because you can see how it pulls the bar closer to this side so thats why we tighten a little bit at a time on each side. Our tensioning tool is straight up so we know that we got it tightened enough. Now well go ahead and install our end caps. The custom fit also comes with some stickers. These stickers are designed to be peeled off and place directly under the clamp as a reference guide for always making sure you get that clamp back in the correct position every time you remove and replace your roof rack. The system has custom cuts slightly arched crossbars that are going to compliment your vehicles roof line. The crossbars mount directly into the leg to create a smooth roof rack with no overhangs. The four legs are made from UV-treated glass reinforced nylon and theyre going to be very durable and weather resistant. This roof rack system does have a maximum load capacity but you want to be sure to refer to your vehicle manufacturers handbook for maximum roof load capacity and then youll always want to use the lower of the two figures. The crossbar dimensions are going to measure 3-1/8 of an inch in width and 1-3/16 of an inch in height. The Rhino Rack Vortex Aero Custom Roof Rack System also features a limited lifetime warranty. Now well take it out and show you it performs and what it looks like going down the road. Were out here on the highway at highway speed without our roof rack installed and with our decibel reader here you can see that without it installed youre hitting about 73-74 decibels. With this roof rack system installed you will see that there is virtually no change in the decibel reading. Thats going to do it for our review of the Rhino Rack Vortex Aero Custom Fit Roof Rack System. .
Ratings & Reviews
Purchased this product to transport my kayak on my 2014 Kia Cadenza.
It came pre-cut specifically for my car and partially assembled. What was not assembled, was sufficiently labeled and instructions were great.
Completely satisfied with this product.
Btw, there is plenty of clearance to open sunroof.
Fantastic product! etrailer made it easy to get all the right parts for my 2016 F-150 Lariat SuperCrew. The instructions were very clear, the video on the site helped even more, although I really didn't need the video as the written instructions were perfect, which seems to be so rare these days. Super solid on the truck and look great! Excellent price. I couldn't ask for more!
Strong and sturdy material, I liked the locks on each side, very easy to put on my cars. I bought this product for my Acura in the beginning, but we bought A Ford F-150 Platinum, now I'm even more happy because works out in both vehicles ..!!!
Roof racks installed pretty easily. It took a bit of time to get the measurements right but that was more an issue with the height of my truck, not the fault of the racks. I used them last weekend to haul a canoe on a 400 mile drive with no issues.
Great Product,quick delivery with Ups Updates,very simple install.Great customer service from etrailer,from order all the way down to delivery to my house received emails from etrailer.Looks great on my 2010 Ford Fusion Sport
The installation was dead simple and took me 25 minutes. They look great and are strong. I tried my best to pull the loose and I cannot even budge them. At 80 MPH they do not make a sound.
I definaltly recommend these rack bars.
This was fairly easy to install - be sure to NOT over-tighten the security bolts. There is very low wind noise when kayaks were and were not loaded - that was nice, especially for long trips. The instructions only had millimeter measurements and no inches conversions, so know your metrics. Service representatives were fabulous when we called to ask questions too!
Perfect fit and easy install on my 2015 Nissan rouge. Installed in less than 1hr by myself. Only thing is, I should have purchased a separate mount kit to shorten the bolts on the J Kayak carrier mount. The space between the rear crossbar and roof is very limited and the instructions say that different mount kits are sold separately. It works with the universal mount but would be better with a different one. There was definitely a mount kit listed in instructions that would work but I forget the product #.
Exactly what I was looking for. 1st time buying this sort of thing but etrailer made it easy to find everything I needed to get started. Rack system is sturdy and looks great on my 2013 Focus Hatchback. Easy to install and I barely notice any wind-noise (there's a slight whistle at 50+ mph but not much at all). Now just need to decide on a kayak carrier and bike rack to go with it!
These car top carriers look great! I ordered them on August 25th and received them September 1st. They were easy to install and are a good fit. With the elliptical shape of the crossbars I realized that the Malone J-style kayak racks I've been using wouldn't fit. However, these are old and needed replaced as well, so I called the etrailer customer service department today to ask about the Rhino-Rack J-Style Kayak Folding Carrier. The product expert assured me that these would fit on my newly installed roof rack. I expect the J-style racks will arrive later next week.
Purchased this Rhino Rack for my Chevy Spark. I have a sunroof and that did not get in the way of the rack. I can open it. It is a really great rack, locks and was relatively easy to install. You do have to measure it.
I dont know if it is because my roof's space is so small; but the whistle effect from this is absolutely terrible. I also don't know if this would be the case with anything I use, due to the lack of room to even position it.
It does the trick perfectly though, it is removable and lockable- just what I wanted.
I bought this roof rack for 2014 Porsche Cayenne Diesel. I prefer to drive with "naked" roof. In my opinion car looks nicer without factory installed roof rails. BTW rails can't be installed by the dealership, only in a factory. By choosing Rhino-Rack Rs 2500 I can drive most of the time without roof rack and install it quickly for vacations. Product came mostly assembled with clear instructions. I am enclosing pictures. Also I did my research before deciding what to buy. Thule aero blades can't be custom fit. You need to purchase a 60" aero blade which creates overhangs on all 4 corners(I don't like how it looks). Rhino-Rack is custom fit for every vehicle and has no overhangs. I tried to fit my Thule box - fits perfectly. Regarding wind noise - can't tell the difference between driving with and without roof rack(I even tried with sunroof open). Overall very satisfied with the purchase.
I have this rack set up on my '04 Silverado - to me they are just as good or better than the big name/big price roof racks. I like that they are vehicle specific, and don't have tube supports hanging out the sides. This may or may not work for your use but certainly makes for a cleaner factory type look. I've had them on and off several times and appreciate the supplied locator stickers that go on the inside of the door jambs when re-installing, makes it easy. I currently have a wire basket mounted to the Rhinos. Thumbs up, good product.
Purchased, received, and installed Rhino Rack Vortex Aero Crossbars on my 2012 Ford Focus Hatchback. The fit is perfect. I watched the video instruction first so doing the job was super easy. I had absolutely no problems with the installation. The bars are very solid and well made. My sister said they look "legit" , like factory installed luggage racks do! I have decided to leave them on the car as there is no wind noise off them. Plus they do look cool. I also purchased the Rhino Rack 440 master Fit Cargo Box: Highly recommend this box. Super easy to installed - very solid attachment to crossbars.
I am impressed by how good these racks look on my 2014 Mazda 6. They were very easy to install - took me less than an hour. Could have been in less time but i was very careful with the measurements. The racks feel very sturdy and of high quality. I was originally looking for Thule racks to fit my Mazda, but Thule did not offer the flush crossbars as i was looking for a sleek factory look. Overall i am very satisfied with these racks and happy with etrailers excellent customer service, even post purchase. I just installed a Thule Criterium bike carrier - i needed an adapt8 adapter but it worked out well!
I have these on a 2008 Chevy Colorado to haul kayaks and the racks work perfectly. They easily install in under 15 minutes. There is more noticeable wind noise, however most of that is likely due to the Thule Hull-a-port pro racks. I was initially concerned about water leaks because these mount underneath the weather-stripping. However that has not been an issue at all and the truck lives outside year round through rain and snow. I've had them through all 4 seasons now and they've held up well. I'd recommend them if you're looking for a more factory look than the "through-the-foot" style racks from other brands.
These crossbars are solid. I bought them along with two of the J-Style Kayak Carriers (S512) and one set of Anchor Straps (RRRBAS-2) so I could haul a few new kayaks. The crossbars were extremely easy to install, especially after watching etrailer's videos. I couldn't notice any additional wind noise when they aren't loaded (granted in an '02 Subaru it can be hard to tell) so I leave them on most of the time. Although, they do come on and off quickly without much effort if you put the provided marker stickers on the inner doorframe the first time you mount them. I keep the keyed allen and the security key in my glove box. I really like that they don't have any overhang like most aftermarket crossbars. Although, that means these are only intended for use on your specific application so if you plan on selling soon, dont expect to keep the rack. The rubber feet and coating give me confidence that there is no damage being done to the roof and they are very sturdy. Overall, a great purchase!
The Rhino Vortex Aero crossbar for my 2018 Prius is the second Rhino rack that I've bought, the first one being a few years ago for a 2010 Prius. Perhaps because of the redesign of the Prius roof line, I find this new Rhino rack is much easier to get properly lined up on the roof. It can be installed in just a few minutes whereas it took about 15 minutes to get the racks properly lined up on the roof of the 2010 Prius. I've made the "maiden voyage" with the new Rhino rack loaded with a kayak for a 70 mile round trip at highway speeds up to about 65mph. The rack + kayak were not at all noisy. I especially like the rubber vortex strips on top of the crossbar that allow me to cinch down the kayak nice and tight. In summary, easy to install, not noisy, works great, and looks good!
Great car rack. Looks like a factory install. Took my time (measuring and tightening) installing only because I'm a pefectionist. Shipping was quick and to my door. I would recommend etrailer to anyone and would use their product again.
I had been carrying my kayak INSIDE my 2010 Prius for a year and decided it was time to add a little class to my act with the addition of a roof rack. I was interested in a rack that would be durable, easy to install, and not noisy. I'm quite pleased with the performance of the Rhino Rack with the vortex aero crossbars. It really has exceeded my expectations. I particularly like the rubber pads that runs across the top of the bars because I cinch the kayak down tight against these without fear of damaging the kayak. On the Prius, the rear rack bar installs easily every time; however, it takes me a few minutes to get the front rack properly positioned because of the slope of the roof line. Overall, I'm quite pleased, and I do recommend this rack for the 2010 Prius.
Purchased Rhino Rack RS2500 for 2010 Ford Fusion. The instructions were very well written and easy to follow. Installation took about 1 hour. The rack fits perfectly on my car and seems solid as a rock. I paid for 2 day shipping and the product arrived within 48 hrs. Very satisfied customer.
No complaints here. Racks arrived partially assembled, along with a set of instructions which made assembly of the second rack a cinch. Well written instructions and graphics for roof mounting made it a breeze. This rack style clips to the under side of roof for quick removal if needed. I use mine a couple times a week and have left it on ever since. Stylish and quiet on the freeway. I use it to carry surfboards. Safer to carry boards on racks than inside the car and keeps the interior clean from wax and saltwater.
Ideally, I wanted a permanent-mount roof rack that looked like it came from the factory. I did find a company that makes them, but my auto body guy thought it was a bad idea. This Rhino Rack is the next best thing. It doesn't like factory-issue, but it's sharp and doesn't look like some slap-on. It also seems much more solid and substantial than the factory rack I had on my old car (Pontiac Vibe). Installation was no issue, with only a couple hiccups. The rubber strips weren't already installed on the rails and it was a bit of a pain to get them in so they didn't have any bumps. Other than that, everything went great. I took my time with measuring where the racks go on the roof, but that's a one-time thing, after marking where the racks go for the next install. Speaking of which, the white arrow stickers they give you weren't very helpful for me since I have a white car. But I had some other miscellaneous auto stickers that I used to make a thin black line for the racks to line up to. I like the line better than having to guesstimate the center of the clamp to line up to the arrow. But I'm probably more worried about being exactly lined up than I need to be. The etrailer youtube video (link) was an excellent resource for installation if/when the written directions weren't clear to a bonehead like me. I was kind of hoping the rails would fit in the space under the C-Max's rear seat, but they're just a little too wide. Bottom line, I'm very happy with the rack, and etrailer did a great job handling my order.
The product fits perfect on the roof of my 2012 Crew cab Silverado. It has the rounded smooth corners, which it makes it appear to be manufacturer installed since my track is black. I used to remove them every time after I was finished using them. Several months ago, I decided to keep them installed all the time and it has not been a problem. I know how high the top of the track stand from the ground with the bars installed. So, when I go to a cover garage, I know ahead of time if the truck will clear or not. I use them to carry my safari rack when I go to the mountains about 5 time a year. This product is very easy to install and comes with all the proper instructions. The only drawback with the instructions is that it uses the metric system to instruct the user on how far from the center of the cab each bar should be installed but whomever wrote the document did not use a decimal point. If the user is not familiar with the metric system, it can throw the user for a loop.
Great product and fit. I must admit that my reasons for choosing this rack were slightly petty: I wanted contoured bar ends (no overhanging bars), I wanted low-profile (compared to OEM), and I wanted the rack in black. Yakima's forthcoming Flushbar is attractive, but not available for my GTI when I needed to make a move. So I went this Rhino Rack.
The bars look great and are almost silent when naked. I can hear a change is wind noise at 60 mph, but no measurable sound increase. At 70 mph, I hear what sounds like crosswinds, but no howling or ringing. I tried Rhino Rack's fairing, but the rack is quieter without a fairing. The Vortex 2500 RS is that good! Don't bother with the fairing, especially if you drive at high speeds (it vibrates against the paint at speeds greater than 73 mph).
Installation is a breeze, especially once the initial fitting is done and the included "arrow" stickers are placed. The included security torque wrench is a slick feature. I wouldn't consider the key locks to be security against rack theft since the plastic covers are probably easy to break off. But they are a slight deterrent and guard against accidental removal of the covers.
My primary use is to carry a cargo box, but the rack may see duty carrying other loads, too.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.