Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
The Rhino-Rack Backbone system lets you mount a Pioneer platform rack on the roof of your vehicle. Backbone rails connect to your factory mounting points with included hardware.
Features:
Specs:
Ratings & Reviews
The product I ordered from etrailer arrived in tact and and in good timing.
Product was exactly what was expected with no damage or defects. E-trailer staff were very helpful and informative in regards to the status of the order.
Always great products by RhinoRack and excellent service from eTrailer….!
This is a pretty great platform. It has held up fine, doesn't leak, and wasn't too bad to install myself. It looks nice, and is there when I need it.
I love how this rack system uses the existing holes in the roof for mounting. Exactly what I was looking for. It makes for a very clean look.
Just as I had expected. Top quality and no rust. A bit scary drilling the holes in your top but all went well. Their anti theft allen screws could use an upgrade.
Way better for camper shells than track s.
This system is great. Have a 6’ rack mounted to it and it easily supports 200-300lbs of dynamic load a d 700+ static load without issue.
Great product... I think the best roof rack option for a Jeep Wrangler.
It took me about three hours to install, by myself. Not a hard install. Just follow the instructions and, the etrailer installation video was very helpful also.
I have used the Rhino Rack backbone system on a previous Jeep and it worked well. Installation instructions were clear. Definitely recommend.
Also a word about etrailer. I have ordered a few times from etrailer. These folks have great prices and have really fast shipping. They are quick to respond to questions and have great follow up after the sale (5 star).
It’s the bomb. Great design. Well made.
Great quality and was easy to install as the directions were simple to follow.
Nice and sturdy but was a PIA to install… prepare to give yourself a few hours to button this up securely on your roof.
I find it cumbersome to work with for what I needed using various carriers. It looked like a versatile setup, but in practice, for my needs, it falls short.
Best backbone I could find for a custom build. Flat lower profile more practical for my needs. Thanks guys!
It is a good starting point to improve on the stock FJ rack. I have had several different setups mounted to the Backbone, but eventually found a used Pioneer Platform that works best. The whole system from Rhino Racks is overpriced for what it is.
Backbone installed- waiting for feet to attach crossbars
Best price on the part. Fast shipping. The install video made it a breeze. Rhino rack was a little lazy with the written directions and stamping all the parts. The etrailer video for 2015 JKU was needed.
Platform racks are the best in the market I think. I'm removing my Platform rack from my 2007 Jeep Sahara JKU and installing it to my 2021 Rubicon JLU. That shows my love and devotion for this very durable and such a beauty to look at system. Had this rack on close to 5 years and still looks amazing. I'm not installing this rack anytime soon. Just wanted to make sure I have the Backbone system for my new JLU when the time comes. Pic of my red JKU with rack attached. Hopefully I can update with my black JLU pics later.
It’s a good product. The only install issue I ran into is the drill bit I used (dewalt) for the front two holes on the hard top wasn’t long enough to work with the included drill stop and I ended up scratching the paint on the roll bars. I installed mine over the top of a carpet headliner with dynamat underneath. I did a “soft install” of the roof rack (used regular nuts instead of nylock, low torque, and no sealant), removed it, then put in the mat and headliner, then finished the roof rack install. Multiple cross country trips with my pioneer platform and no issues with excessive noise and no water leaks.
Excellent product, very well engineered. ETrailer is great with shipping time and communication as always. The instructions aren't perfect and its much easier for me to follow a video. Both RhinoRack and another site have great install videos. Took me a couple hours just taking my time and being careful. I had to loosen the hard top to access the front spacer install but otherwise its very simple just follow the directions carefully when drilling thru your hard top. Measure twice cut once mindset.
The only negative was my package had been ripped open some and one of the parts had protruded and gotten scuffed up a bit. The powdercoating is pretty durable because it cleaned up well and is not noticeable really where installed. The price is also iffy. Its very well engineered and works really well, but for what it is from a material input cost... seems about 20% to high.
The best
The backbone rails look great! However, the instructions need to be revised to include information that is Armada specific. Instructions for removal of factory rack is not included and not available anywhere I could find on the internet. It’s almost impossible to remove the end caps on the factory rack without destroying the tabs that hold them in place. Also, the middle connection point of the backbone has 2 bolts, the factory rack only has one. However, the second hole is there but you must remove the trim piece that sits below the factory rack. It’s simple to remove and reinstall without damaging the clips. In order to make the backbone rails fit, you have to cut an additional couple of inches from the existing window in the trim piece in order to expose the second hole underneath. This is pretty simple with the right saw but some additional instructions on this would be helpful. Overall, this is a great product, just need to make customers aware of the extra steps needed on the Armada vs the installation on the Nissan Patrol.
Excellent product. Be aware that you WILL have to cut into the gutter guard to install this. I used a Dremel with a grind wheel to cut a roughly 2" x 1.75" square to reveal the second bolt insert hole in the center mount.
Delivered fast and it fits well. Took me 1.5 hrs to install but could be less.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Victoria H.
2/20/2025
Hi Noel, thanks for including a photo with you feed back. The install looks great!