To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Low-profile, aerodynamic crossbar lets you build an aftermarket roof rack for your vehicle. Aluminum bar has a T-slot that lets you mount channel-mounted carriers and accessories. Rubber strip in T-slot keeps out dirt and won't need trimming.
Features:
Specs:
This low-profile Inno Aero crossbar lets you build a stylish, aerodynamic roof rack for your vehicle. The crossbar requires 2 Inno Flush or Through feet to mount the rack to your roof. You may also need a custom fit kit to mount the crossbar. A built-in T-slot in the top of the bar lets you easily mount carriers and accessories on the rack. A flexible rubber strip in the channel keeps out dirt and requires no trimming or adjustment. The crossbar is also constructed of strong yet lightweight aluminum so it won't rust.
This lightweight bar has an elliptical shape. The aerodynamic, low-profile design helps to reduce wind noise and drag when you drive. This means you won't need to add a fairing.
The Inno Aero crossbar is constructed of sturdy, lightweight aluminum. An internal extrusion adds strength and structural rigidity without adding a significant amount of weight. The bar is rustproof so you can leave it on your roof all year long, wherever you go. The sand-blasted powder coat finish resists corrosion, scuffs, and scratches. And the matte black color will look good on any vehicle.
This crossbar has a channel in the bottom that lets you install Inno feet (sold separately). Slide the channel cover over to reveal a mounting hole for the foot. Clip the foot into the crossbar and then slide it into place along the channel. A built-in stop in the channel will keep the foot from sliding off the end of the bar.
To complete installation, mount the feet to your roof. This may require a custom fit kit (depending on your application). Attach the locking covers (included with the feet) to secure the roof rack to your vehicle. Locking the covers also secures T-slot-mounted accessories to your crossbar.
This bar has a built-in T-slot that allows you to mount bike racks, watersport carriers, ski racks, and more. The EZ-Slide rubber strip in the bar lets you mount accessories without the need to remove or trim the strip. Just press down on the ends of the flexible strip and slide your accessory's mounting hardware into the T-slot. This strip has a plastic coating so it's easy to slide T-bolts along the channel. The strip runs the full length of the bar, so it helps keep dirt out of the channel when you're not carrying accessories.
You can also attach most clamp-on accessories to the bar, and the rubber strip provides a no-slip cushion for any accessories that rest on it.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're going to be taking a look at the Inno Aero crossbar. This is a low-profile crossbar that lets you build a stylish, aerodynamic roof rack for your vehicle. The crossbar requires two Inno Flush or Through feet to mount the bar to your roof. This is going to come with one crossbar. This is a half kit. It may also require a vehicle-specific custom fit kit depending on your application.
Vehicle-specific custom fit kits are sold separately and available at etrailer.com.Now this bar features a really nice elliptical shape that helps create an aerodynamic system. Really helps reduce wind noise and drag as you drive down the road. The unit does feature a slight bend at the center of the bar. That's going to help ensure a sturdy custom fit rack. It also features the integrated t-slot.
That makes it easy to slide channel-mounted carriers and accessories onto the bar. This bar also accepts clamp-on accessories that would conveniently wrap around the bar.This rubber strip is a flexible rubber strip that keeps dirt out and allows for simple mounting in the t-slot. All you got to do is press down on the strip and slide in your accessories. No trimming of that strip is required. That strip actually features a nice plastic coating that allows the t-bolts to slide easily along the channel.
Also creates a cushion and a non-slip platform for your gear.On the bottom of the bar it features a channel located on each end. That bottom channel allows easy installation to Inno roof rack feet. Simply clip the foot into the crossbar and slide it along the channel to where you need it for your application.This bar is made from a lightweight aluminum construction. It's very durable and it's rustproof. It features an internal extrusion.
That's going to provide exceptional bar strength. The unit features glass-blasted, powder-coated finishing. That's designed to resist corrosion, scuffs, and scratches. It's matte black in color, gives the bar a really nice, clean look. Locking covers or end caps come with Inno feet. Again, you're going to get one crossbar. From edge to edge it measures 3-1/8" wide by 1-1/8" tall or thick. The bar is available in a variety of lengths. You can check out etrailer.com to see all the options available. It's covered with a limited lifetime warranty. That's going to do it for today's look at the Inno Aero crossbar.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.