Video Transcript for Review of etrailer Hitch Pins and Clips - Standard Hitch Pin - e47RV

Hello, everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at this etrailer Black Nickel Hitch Pin and Clip for two inch and 2 1/2" hitches. Now you're gonna use this durable 5/8" diameter hitch pin to secure your ball mount or your hitch mounted accessory to your two inch or 2 1/2" hitch receiver. It does include this clip here which you'll install on the end of the pin to secure your accessory in place. So after you install this through your hitch hook hitch pin hole and through your accessory or ball mount, comes through on the other side, just put your clip on there, (pin clicking) push it all the way in 'til it locks it in place and it'll secure it there. Now, the usable length which is the measurement on the inside here, on this one it's gonna be right at three inches.

So you can see if we put a ruler on it there's your three inch usable length or span, they also call it. Now this is a carbon steel construction, you can see it has a nice black nickel finish which is durable and corrosion resistant. And, again this is designed to fit most two inch by two inch and 2 1/2" by 2 1/2" trailer hitch receivers. Well, that's gonna do it for a look at the etrailer Black Nickel Hitch Pin and Clip for two inch and 2 1/2" hitches.