T-fitting makes camping easier by letting you use an auxiliary propane cylinder to power appliances so that you won't deplete your camper's tank. Disposable bottle adapter hooks up a small appliance or propane tree. Supply hose included.
Features:
Specs:
Note: When using quick-disconnect ports for cooking, bear in mind that the propane pressure is still high, as the Sturgi-Stay is installed before the regulator. Outdoor cooktops, grills, or other appliances will often require a regulator. Check your equipment to see if one is required.
Make camping more fun and relaxing. Moving your 5th-wheel camper or travel trailer once you've gotten settled at the campsite is a real chore. No one wants to have to pack up, unplug, and go refill the propane cylinders, just to come back to the site and set everything up all over again. This Sturgi-Stay T-fitting lets you connect an auxiliary cylinder to your setup using the included fill hose. As a result, you can run your appliances off of the propane in the cylinder rather than using up the LP gas from your trailer's setup. When you run out, just refill the auxiliary cylinder and hook it up again.
The disposable cylinder port on the Sturgi-Stay provides a connection point for a small, portable appliance or propane tree. This way you can power a grill, heater, or other accessory without needing to use a 1-lb throwaway cylinder. Simply attach an adapter hose (sold separately) to your appliance and then to the disposable cylinder port on the T-fitting.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today, we're taking a look at the MB Sturgis Sturgi-Stay T-Fitting with hose. This adaptor kit lets you connect an auxiliary cylinder to the propane system on your fifth wheel camper or travel trailer. It allows you to use your auxiliary cylinder as your propane supply to power your appliances.It comes with a T-fitting right here, this connects inline between your tank valve and your pressure regulator. It features the male number 600 one inch by 20 disposable cylinder port that lets you hook up the small appliance or propane tree. Then it has the quarter inch female inverted flare fitting that faces outward to easily connect to the included inverted flare pigtail.The fill hose that's included with this kit accommodates a higher flow of gas without going into bypass mode. It connects your auxiliary gas cylinder to the included T-fitting.This kit is UL and CSA certified.
It's designed for LP gas only. The maximum pressure rating is 250 PSI. The fill hose measures five feet long with a quarter inch in diameter and we have the POL tank connection on there, and we have the quarter inch male inverted flare.Now all the fittings on the unit are made from a really nice durable brass construction. So they're strong, they're gonna last a long time, and they do a great job at resisting rust and corrosion. We also have the caps that are connected to the tee so that way they don't get misplaced or lost.That's gonna do it for today's look at the MB Sturgis Sturgi-Stay T-Fitting with hose..
Third order I have made with you. Each order arrived quickly and fit perfectly.
EXACTLY AS DESCRIBED. VERY GOOD QUALIT Y!
Excellent service....products are just what I needed!
Perfect!
Works just as it should
this has been a life saver for me in the winter allowing me to utilize multiple tanks at one time. thanks!!
This product is working our perfectly. Easy to install and set up.
Just what the Doctor ordered, this appliance makes hooking an external supply tank a breeze.
Just what I needed to hook up my propane BBQ from my trailer, which didn't come equipped with a quick coupler.
I have not used it yet but I am sure this will allow me to run my 5th wheel on a 100lb propane tank which is much cheaper to fill
I ordered 2 different ones from camping world and both were wrong. This worked amazing. Thr problem with most of these they don't hook up to the propane tank and the hook up from the camper to the propane tank. This one you unhook one of your propane tanks and hook this up and then hook the propane hook up to the fitting. Simple.
Hose end going into tank has a little ball bearing check valve in it, within a week it fell apart, when I took the hose off to fill the tank the spring flew out, the ball bearing flew into the rocks never to be seen from again... tossed the entire thing in the garbage.
The product was exactly what I needed to complete the propane system for hunting this fall. Wish would not have taken so long to get.
Quick and easy straight to the point
Do you have a question about this Propane Fitting?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.