WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front and Rear Set
This item does not fit your vehicle
1988 Ford Bronco
These items fit your vehicle
1988 Ford Bronco
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These premium mud flaps are easy to install and digitally designed for a perfect fit. Protect your vehicle and your trailer from road debris. Flaps are constructed of durable thermoplastic resin.
Features:
Alternate Instructions
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone. Aidan here with etrailer. Today, we're gonna be taking a look at WeatherTech's line of no-drill mud flaps. These are gonna come in a variety of different fits for your different vehicles. So be sure to plug your vehicle information into our fit guide and find the right kit for you. And not only are these available for the rear, but you can find them for the front tires or as a full set for all four wheels.
Let's check 'em out. Now whatever vehicle you do plan on putting this on, mud flaps are gonna offer pretty much the same benefit, protecting maybe a trailer if you're towing a camper or something behind you, but also the paint on your vehicle. The bigger the tires are, the more rock and debris are likely going to be kicking up, and all of that painted surface at the bottom of your vehicle is going to be victim to that over time, causing potential damage, scratches. And having something here behind the tire is just gonna help reduce that and keep the vehicle looking nicer for longer. And the big draw to these options from WeatherTech is that they're all gonna be custom fit, no-drill installations.
So the custom fit you can see particularly well on this F-150 right here where there's a small plastic lip, and the mud flap conforms around that and down to the bottom perfectly minimizing any gaps. And on the back, we can see how it's a no-drill installation. Again on our F-150 today, it's using factory mounting locations at the bottom on the inside edge. That will look a little different for every vehicle depending on the factory locations available. And in a lot of cases, WeatherTech has this quarter turn stainless steel lever that will essentially just hook in behind the fender and give you an attachment point if your vehicle doesn't have one, rather than making you drill a hole.
And if you did purchase the full kit, you'll have the exact same options and the same benefits on the front of your vehicle with that custom fit, no-drill installation, but you always have the option to just get one or the other. So if you already have rear mud flaps or you plan on using a different style of mud flap for the rear and you just want something on the front, you can do that. Or if you're really only concerned with the rear of the vehicle, you could do that too. Construction will be the same across the board. This black thermoplastic resin, which is a bit more of a rigid material, but it still does have some flex to it, just not enough that it's gonna be flapping around in the wind.
And the black plastic here tends to match vehicle plastic really well. So whether you've got running boards like this F-150 has, plastic trim around the fender, it's probably gonna blend in really well and look factory. But that's really all there is to it. Like I said before though, be sure to use the fit guide here at etrailer, plug in your vehicle information, and find the right ones for you because with them being custom fit, it's really important to just get the right set for the right vehicle. But that'll do it for our look at the line of WeatherTech no-drill mud flaps. Thanks for watching.
Ratings & Reviews
Delivery was quick. The mudflaps were very easy to install it took me about 15 minutes. Extremely happy with the way they look and no more rocks and debris flying up from my tires. Definitely recommend.
The Weather Tech mud flaps are very well made, fit perfectly and are very simple to install. I’m very impressed with them and they really help protect the body of my Jeep Grand Cherokee.
Seems like a solid product. Made in the USA. The instructions were a bit off. So I jumped on the etrailer YouTube account, found the install video. Issue solved. I will say I'm more impressed with etrailer than weathertech. However, nice fit and finish. I would recommend this product.
the fit was very good with the mud flaps fitting with my factory fender trim. The only issue was the clips that came with the setup. there were supposed to be 4 and there were only 2 in the packaging.
I ordered Weather Tech mud flaps for my GMC Sierra 1500. The front flaps were easy to install by using existing fasteners installed on the truck by GMC. The rear flaps were slightly more challenging requiring the placement of clamps (integral to the flaps) on the rear fender. The entire installation of all flaps required about 45 minutes. they look great and they will protect my fenders from being damaged by road debris.
I purchased these for my wife's new 2031 chevy traverse. They look great and were easy to install. I have had many weather tech products through the years and have been very happy with them.
This is a good investment. First, etrailer is a great place to get what you need for supplies! The weathertech mud flaps are a great addition to a raised F-250 with larger tires that pulls. This will provide the rest of the protection I need as well as cut down on debris that the tires throw up at other cars/trucks. Very easy to install and if I want to remove them then I have all the pieces necessary except for the push grommets which I can get anywhere. I think I will leave them on for a while....not bad looking either.
Fits my 2018 Chevy Silverado 1500 custom front steering wheels mud flaps. Bolts on correctly and fits good.
Weather tec is great, getting it from e trailer is also great. As the fit is always guaranteed. There customer service and follow up is second to none.
Mudflaps fit perfect and look great. Great business to deal with and fast shipping
hope it solves the problem of dirt and snow on my running boards and the same to the rear bumper..then the trailers up to a point..
Front mudflaps were easy to install. Rear mudflaps need a new design. Instead of a bolt, two washers, and a lock nut, WT should use some sort of insert into the whole where the bolt goes through. It is extremely difficult to get the washer and lock nut onto the bolt as the area is small. Something like a drywall anchor in the hole and then screw into the anchor. Finished product looks great. Please pass my comments onto Weather Tech.
The rear mold is not correct dose not fit the inner contour had to fight for 2 hours to get them mounted with nuts and bolts and heat gun to get it to draw in these were for a 2022 Jeep Gladiator
Quick shipping was always from etrailer. Product was a perfect fit on my vehicle and easy install took about 30 minutes.
Easy installation. Instructions are easy to understand.
Would have gave a 5 rating but had trouble with a flawed supplied screw clip so took a bit longer on the install. Had to remove the clip and modify so supplied screw would thread into clip. This happened to be the last screw to tighten.
I was concerned at first as my Colorado with factory installed fender flares made it tough to find mud flaps that would fit my truck. I called etrailer and they verified that they had what would fit my truck. They were spot on and they fit Great and look Awesome. Couldn’t be happier thanks to etrailer for their professionalism and knowing their product. Would buy from them again.
These no drill mud flaps are easy to install and look factory after installation. I was told by Weather tech they would not fit my 2025 F450, but they were wrong, they fit perfectly. I wish they used black screws and washers, it would look more finished than an after thought with the stainless metal screws and washer. Great product, would recommend, thus the five star rating. I have been using Weather tech products for years.
WeatherTech products looks fantastic and are easy to install. This set was simple to install on a 2021 RAM Power Wagon
These were easy to install and look great on my 2023 F350 dually. I was a little concerned about how close the passenger side one is to the exhaust tips. Have only used them on one 2 hour drive but so far so good.
Vehicle 2026 Ram 2500 Dually. Ordering was super easy to identify the mudflats for my vehicle. Quick delivery with tracking to prepare when they arrive. Installation: Use the 2 current factory screws on each fender for a quick install, less than 20 minutes for all 4 a nice clean factory molded look. Front length looks good. Just for awareness. The rear isn’t as long as your typical rubber mudflap if you are looking for something that hangs closer to the ground. Hopefully can see the length in the photos.
Great product. Excellent quality. Looks great. Very simple to install. Took about 15 minutes to install. Fit was perfect. No adjustments to make. Fast shipping.
Mud flaps went on with little effort. Great buy!!
With stock tires was having rubbing issues on driver side front. Ended up drilling more holes and installing more plastic tabs to hold it tighter to fender. Works better now but still have a little rub in certain situations.
I was apprehensive about buying these as the weather tech company said they would not fit. My vehicle has power running boards and 22” wheels..I researched forums and took a chance. They fit…no problem. See attached photos and video.
Thanks
Do you have a question about this Mud Flap?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
7/15/2022
It sounds like you vehicle may have come with some fender flares and thats why it is not attaching as easily as it should.