Crank up the sound when out on the water, firing up the grill, or watching an outdoor movie with the family. This waterproof, coaxial design is the perfect upgrade or replacement for your boat or RV, offering better sound over a dual-cone speaker.
Features:
Specs:
What is a Coaxial Speaker?
A coaxial speaker consists of a large main speaker (woofer) that reproduces bass sounds, and a separate small speaker (tweeter) that mounts above the woofer and reproduces high frequency sounds. Unlike dual-cone speakers that only use one driver to push sound through two attached cones (woofer and tweeter), a coaxial speaker has separate drivers for the woofer and tweeter along with a built-in crossover to control the frequencies sent to each speaker. This reduces distortion and allows for crisper, more articulate sound over dual-cone speakers.
How to Properly Measure for Cut-Out Dimension
There are two main dimensions you need to know when choosing a replacement speaker or adding a new speaker or speakers to your audio setup:
The cut-out diameter is the width of the circle needed to ensure the speaker mounts flush to the wall or ceiling.
The mounting depth is the depth needed behind the mounting surface for the speaker's frame and magnet structure to fit.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello, everybody. This is [email protected]. Today, we're going to take a look at this Jensen 75 Watt, Recessed Mount Marine Speaker, in a gray color. It's for a quantity of one. Now, this is a nice outdoor speaker that'll project sound from your TV or radio onto your boat, your RV, or your camper. And this is a coaxial design, which features a titanium dome tweeter, and a polypropylene woofer cone.
The dome tweeter will increase your high frequency sound distribution, and the woofer cone produces the bass sounds and the internal dampening. You can see it has a nice durable, gray plastic frame and grill. It is UV resistant and waterproof. It does meet the salt spray exposure standard compliant, and UV exposure standard compliant. It is a very simple installation.
Has four holes here that you just put your screws in there. Now, the mounting hardware to install, this is not included.A few specs on this. The overall dimensions, the diameter from this edge to this edge, going to be right at seven and one eighth inches. The depth of it, from the back to the very front, three and a quarter inches deep. Now, this is designed to fit into a cutout and the cutout dimensions this fits in is five and a quarter inch diameter by about two and three eighths inches deep.
The woofer, itself, diameter is six and a half inches. And the mounting holes, we mentioned, if we measured center to center, the mounting hole this this way and this way, is going to be four and a half inches. Maximum wattage on this speaker is 75 Watts, 35 Watts RMS. Impedance is four ohms. Sensitivity is 88 decibels.
Frequency response, 65Hz to 20kHz. And the magnet weight is 11 ounces. And it is for a quantity of one speaker. Just to show you the back of it. But that should do it for the review on this Jensen 75 Watt, Recessed Mount Marine Speaker, in the gray color, for a quantity of one.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.