Hopkins Semi-Custom Auto Floor Mats - PVC - Front/Rear - Black

Video Transcript for Hopkins Semi-Custom Front and Rear Floor Mats Review

Today, we'll be looking a line of the Hopkins Semi-Custom Floor Mats. This particular set comes with the front and rear. You can find a variety of colors on our website at etrailer.com. Okay. We've taken our mats out of the package, and you'll notice they're nice and heavy-duty. They're made from a strong, durable, water-proof PVC construction.

As you can see here, there are raised channels and threads. These help avert the spills and debris coming off your shoes. You'll also notice the trim running around the outside here. They're made for a custom fit for your vehicle, so you can cut these, and it fit nicely up underneath your pedals and around your seat. We'll flip one of them over, and you'll notice the claw-shaped anchors here and right up front. These are going to help secure it and keep it from sliding on your carpet.

To start off, cut off this tab. Once we've got that one done, we'll go ahead and do the other one. Now, we'll go ahead and take our mat and we'll check for our fit. We'll come over here to our driver side. Go ahead and tuck our mat up underneath our pedals as far as it will go.

Once again, keeping in mind that if you need to, these are all trim points that you can cut for a custom fit for your vehicle. It looks like here with our mat in place. We've actually let that and it makes a nice fit for our vehicle without having to trim any edges. For our passenger side, take our floor mat and put it up as far as we can, so everything evens out. All right. It looks like we'll need to trim a little bit off right up here on the left side of our interior of our passenger side here.

We'll just need to trim off this right here and up through here. We'll use that as a nice little guide. We'll start up here. Work our way down. Just making little cuts every time. Good. Then, we're ready to put it in our vehicle. With our mat trimmed now, we'll go ahead and place our mat back in our passenger side, get in place where we originally wanted it. As you can see, we have a nice semi-custom fit right up through on the left side here where we needed it trimmed. Now for our rear floor mats. They feature the same as the front floor mats on our vehicle. They got the nice claws here to grip through our carpet as you can see there. Then, of course, the thread on the front. Now, before we go ahead and test our hit, we'll go ahead and trim off our factory tabs here. As you can see, there's a little scissor mark, so we'll start there. All right. Once we've got that cut, we'll move over to the other side. Now, real quick. You want to go ahead and leave these tabs. These are not meant for cutting, not just yet at least. All right. Now that we have both of those tabs removed, for this fit, we're going to go ahead and separate our mats by cutting here and here. Now that we have that separate, we'll go ahead and do the other side. All right. Now that we've got those separated, as you can see, it leaves us with a driver side and a passenger side for our rear format and even a center section if we need to use it. Now, we've got our mats all laid out in the back the way we want. As you can see here, we'll just need to trim this off. Once we cut that off, it will make for a nice fit in our vehicle. Now, up here, you'll notice there's little holes here in our tabs that we didn't cut off. These Hopkins floor mats have come with anchor points, and that's going to help us tie them together. We'll definitely do that. Then, you'll notice, as we work our way to the center console, if our center console was just a little bit bigger, we may even need to cut our trim here, but no need for that. It looks pretty good where it is. Now, we've got our mats all laid up, and we can go ahead and cut what we've decided to trim off which is going to be this second line here. We'll just start with a small cut and work our way. All right. We've got that one. Now, we can go ahead and move over to this one. Let's start with a small cut, and then slowly work our way up through. We get up through here. Go ahead and come around. There, we've got it. All right. Now that we have our floor mats cut, we can go ahead and piece them together with our center piece. Bringing this up through here. Go ahead and line up our holes. We'll take our anchor points. Push those down through, and you could feel with your hand there underneath. We'll go ahead and put that other one in first. Now that we've got that through, we'll go ahead and turn it over, so that way you guys can see. Check our other end here and push that on. All right. Now that we've got that side, come over to this side and do the same thing. Line our tabs over, put them through our anchors, push down on our clips, and then as you see there, our mats are together. Also, with those being through, it's going to help keep into our carpet without moving. Also, with our claws here. All right. Now that we've got our mats anchored together, we can come in, put our mats where we want them, and as you can see, a nice semi-custom fit. That will complete our review of the Hopkins line of semi-custom auto floor mats. .