Secure this TV mount to the wall in your RV if you have the space for it so you can enjoy family movie night. Even if your TV is crammed in a corner, you can still swing it away from the wall and swivel it up to 350 degrees toward the couch.
Features:
Specs:
Easy to Adjust the TV Angle
When you get to the campsite after dark and want to unwind with a good movie, you can easily adjust this mount so you can view your TV from any spot in the room. If your TV is crammed into a corner, simply pull the handle at the bottom of the mount to swing it away from the wall up to 180 degrees. This makes it easier to see the TV screen than you could with mounts that extend straight forward.
You can also almost fully swivel the mount around 350 degrees. This means that the whole family will be able to see the screen wherever they are in your RV living space, whether you want to watch a movie while folding laundry or the kids want to watch one of their favorite shows while eating lunch at the dinette table.
The mount can also tilt downward up to 10.5 degrees. This is perfect for reducing the glare on your screen on a sunny day or entertaining the kiddos while they play on the floor during a rainy day.
How to Measure Your TV for VESA Mounting Patterns
VESA is an industry standard for measurements given in millimeters used to mount TVs. Most modern TVs use this standard, but you need to know your TV's mounting pattern to select the correct mount. To find this pattern, use a ruler to measure the distance between mounting holes on the back. You can measure in centimeters, keeping in mind that 10cm equals 100mm.
This diagram illustrates the compatible VESA mounting patterns of this RV TV mount:
If your TV's mounting pattern requires a different configuration, you can use one of MORryde's TV mount adapter plates (MR43ZR - sold separately) to get the right fit. The plates are installed on the mount to adapt for TVs that call for a 300mm x 300mm or 400mm x 400mm VESA pattern. Be mindful of the mount's weight limitations.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there. I'm Michael with etrailer.com. Today, we're gonna take a quick look at this more ride full motion TV wall mount. This bracket is going to securely hold your RVs TV to your wall on your RV. This TV mount will extend out as you can see Zack here working with a mounted television. So it's going to extend out quite a bit there.
It's going to give you the option to swivel the TV 350 degrees, or tilt it up to 10.5 degrees. Or you can also swing it from side to side, 180 degrees. So it gives you a lot of options to make sure that you're getting the perfect viewing angle. And then when you're done, ready to move, you can collapse it back against the wall and it will walk right into place so that it's not going to move as you are going down the road. The mounting plate here is a 8 7/8 inch wide by 8 7/8 inch tall plate.
That's going to have three VESA compliant mounting patterns. So you're gonna have a 75 millimeter by 75 millimeter, a 100 millimeter by 100 millimeter, and a 200 millimeter by 200 millimeter pattern here. So that's going to accommodate a wide range of televisions out there. This does have a maximum load capacity of 25 pounds. So you want to make sure that your TV is going to fall within that weight range.
And obviously you do wanna make sure that your wall is gonna be able to support the weight of the television and the bracket itself. So when we have it fully retracted as it is now, it is just about 3 3/8 of an inch deep counting our handle down here at the bottom, it is right at 10 5/8 of an inch tall and counting from the side of the bracket all the way out to the side of our arms here, it's about 14 3/4 of an inch wide. So make sure that that's gonna work for your setup when it's fully retracted. When we extend it out, it's going to, we're just gonna pull on this knob here to unlock it and then pull out. You can see these joints are a little stiff which is kinda nice when you are working with a television, you don't want it to be too flimsy and wobbly.
So when we have it fully extended out like this, it is going to be right about 26 inches from the top of our plate. When it is in the full tilt forward position back to our mounting plate, 26 inches deep, it is still the same height and the width is going down a bit because we don't have those arms sticking out to the site here. So it's only about 12 1/4 of an inch wide. So a really nice option for you to make sure that you can see your television from any place in your RV, where you have this mounted, it's gonna give you lots of options to adjust. And like I said, these pivot points are pretty stiff but they are going to give you a nice sturdy support for your television. And then when we are ready to load up, we can see this knob here is going to hold it in place. So we don't have to worry about our TV swinging out as we're traveling down the road. This is made here in the USA. So you can trust, it's made to the high quality standards that we've come to know and trust for products that are made here in the US. So if you are looking for a really nice TV wall mount, this is gonna do a good job, give you lots of options as to viewing angle. We do have a very similar product here at etrailer.com. It's got a little bit higher weight capacity. So if you are needing a little bit more weight for your television, I would recommend that one but this is the 25 pound weight capacity. And it's gonna do a really good job for almost all your televisions in your RVs. So that's gonna complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..
Order arrived quickly and in good order.
Great speedy service and communication!
Worked great
Works as designed..strong and sturdy
Very pleasant and helpful staff. They’ve been there for my needs. This company will satisfy your every need.. I will continue to work with this company!
Regards
The bracket is well made, and I really like the locking feature that securely holds the TV in place when we are on the road.
Solid TV mount. Satisfied Customer
Excellent product
Well built bracket & tremendous customer service.
Do you have a question about this RV TV Mount?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.