To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
When you’re hauling a camper for hundreds or even thousands of miles, stability is everything. These custom-fit TorkLift tie-downs secure directly to your truck’s frame—the strongest part of the vehicle—so your camper rides solid with no sway or shifting. By lowering the center of gravity and spreading weight evenly across the frame, they help your truck handle naturally, even in strong crosswinds or on uneven roads.
These tie-downs bolt right onto pre-existing holes in the frame, so there’s little to no drilling and no cutting into your truck. The fit is completely custom, tightening up close to the frame with minimal loss of ground clearance. That means you get a clean install that keeps the tie-downs tucked up out of harm’s way, ready to work when you are.
When it’s time to drive without the camper, just remove the tie-down arms and the brackets will be barely visible under the truck. The compact design keeps your rig looking clean and uncluttered while still ready for your next trip.
Each tie-down is made from heavy-duty steel and finished with a high-impact powder coat that stands up to road grime, salt, and weather. The finish adds an extra layer of protection against rust and wear so you can count on them through years of travel and rough conditions.
The tie-down arms feature two anchor holes so you can adjust reach and angle for your turnbuckles (sold separately). This lets you position your anchors properly to hold the camper steady from multiple directions, keeping it locked down tight through every mile.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello everybody, this is Jeff at etrailer.com. Today, we'll take a look at the TorkLift custom rear frame mounted camper tie-downs. Now, these are a custom fit part. They are designed to fit the 2007 to 2013 Toyota Tundra trucks, all bed sizes and without the board or the step underneath the truck bed. Because it fits so many different vehicles, I do recommend for you to go to our website, use the fit guide, put in your year model vehicle and it'll show you if this will work for your application.Now, these tie-downs will provide the attachment points at the rear of your truck for securing your bed mounted camper to your vehicle. They also sell front tie-downs.
We do sell those separately on our website. Basically, one tie-down will go on the driver's side, mounts to the driver's side just like that. And then one will go on the passenger side, mounted just like that. And basically, the two holes on the tie-down inserts right here will allow you to connect your turnbuckles from your camper to your truck and not interfere with anything on your vehicle. Also, they have two holes in the shank here of the inserts and that allows for different width campers.
In other words, I have it out at the first hole, so it's extended out further. If you have a different width on your camper, you can actually slide it into the next hole. If it's a little bit narrower, put your pin through there, clip it and you're ready to go that way. It has two different ranges for different width campers.And it'll let you feel dramatic improvement with the vehicle handling and stability because it's the safest way to haul a truck camper. Prevents any vehicle sway or camper movement in all directions.
Basically, you haul your truck camper confidently by attaching these tie-downs to the strongest part of the truck, which is the frame and the vehicle manufacturer does always recommend that all full height slide in camper bodies be directly attached to the vehicle frame structure. And the reason is the frame mounted design will ensure excellent handling by securing the camper to the truck's base, instead of just to its bed. It will better distribute the weight to help keep the setup from being too top heavy. Plus, it will also help avoid any bed or bumper damage that's common with other tie-down systems.These are a fast, no-drill installation securing your camper to your truck, which will help you maintain the value of the truck, prevent any rust and bed damage by avoiding having to drill into your truck bed or bumper. And as I mentioned earlier, these are custom fit for your vehicle.
The driver's side and passenger side brackets, they fit tight to the truck frame. There's no loss of any ground clearance. They are perfect if you do any off-road truck camping.And they're virtually undetectable when they're not in use. As I showed you earlier, if you just pop your pin and clip out, then you can actually remove the inaudible 00:02:43. Also, once these inserts are removed, then these brackets are all underneath the truck, you can't even tell they're there. And then when you go to use them, just slide it in, line it up to whatever hole you need, put your pin through, clip it and then you're ready to attach your brackets to it. The hidden design of these brackets will return your truck to its original look when they're not being used as tie-downs.These are a nice steel construction. They have a nice black powder coat finish on them for durability. And this part will include everything shown here, the two rear tie-down inserts, the frame brackets, all the necessary hardware to install it, nice set of detailed instructions. And these parts are made in the USA. That should do it for the review on the Torklift custom rear frame mounted camper tie-downs.
Ratings & Reviews
Installation was fairly simple, instructions were good and I had everything I needed.
Only had one issue passenger front the last didn’t line up bolt didn’t got in I had side drill on the bracket a little to get it figures the last one I did the rest was easy.
To start, e-trailer has always been good to me and I have purchased from them many times. This product is well built and for that they would get high marks. The packaging was terrible! Heavy metal parts not adequately wrapped, thus one of arms punctured through the box. The plastic bag inside holding all parts is not adequately sealed (just a pinch seal like a ziplock bag) thus it opened up spilling contents all through the inside of box. When I went to pick it up from delivery, contents were spilling out all over. I photographed and notified e-trailer. I’d suggest better packaging and use box tape to seal the hardware bag.
Installation took me about 45 minutes. The directions are not good, but enough to get them installed without much trouble.
The tie down work great on my 2024 F350 SRW Tremor.
Worked great. Install was not bad. I particularly liked the fact I did not have to drill any holes.
Great product! Fits perfect to the frame and very good quality materials. Even fit perfectly with my rock sliders.
Fairly easy installation. Good instructions, but it helps to watch one of the YouTube videos first. With just the receivers, you can hardly even see them, they’re tucked underneath so well. Very sturdy. I feel very confident that no matter what, these babies will hold. They’re pricy, but well worth it.
I did a lot of research to find the right kind of frame mounts for my dads truck. Lots of local RV places didn't even know what I was looking for, or quoted me for the wrong parts. After I was certain I found the right tie downs, I contacted etrailer customer service chat representative and they were a great help at confirming the parts I found would in fact fit my dads truck. My husband and dad installed them in less than 2 hours. The parts came quickly and in excellent packaging/condition.
Great experience. The man that took the order was very familiar with the Torklift Tie Downs and was able to answer all my questions.
I installed these on a 2019 F250 Super Duty. The most challenging step was loosening the leaf spring nuts. Once that was done, the install was a piece of cake. Tehran not in use, they are not very noticeable. They are very sturdy and hold the camper securely. Although the entire system (w/fast guns) is a bit pricey, they are well worth it!
Product arrived quickly and install was simple with supplied parts, instructions and tools.
With the exception of removing the emergency brake lines. I could have done this job of mounting the front and rear mounts in under two hours, instead of three. Excellent design and looks great!
Order the kit. This is the second set I have ordered in the last few months. etrailer ships fast and makes sure you can track your shipments. Also notifies you every step of the way. I appreciate the follow through with keeping me informed at when my package will arrive. I tried to buy these direct from the manufacture but they wanted more than etrailer and I had to find back and front sets. They did not sell them in kits.
Also glad the etrailer doesn't play the game of shipping in the lower 48 states only BS, there are 50 official states ins the USA (51 if your counting Alberta)! Plus numerous US territories...
Second set of Torklift camper tiedown brackets I have purchased. 1999 Dodge 2500 and 2016 Ram 3500. Fit good. No drilling. I would buy again. Good product. (I am a certified ASME, AWS, API, welder and fabricator). No hype, just fact.
The camper tie downs are still working great.
I would say that the Torklift kit fit my 2024 GMC sierra pro crew cab perfectly the shipping to Canada took 5 days which I thought was fast delivery and it shipped the same day it was ordered
Ordered for 2025 GMC 3500HD to carry our Arctic Fox slide in camper. Kits were shipped right away and arrived in Anchorage in 5 days (as ordered). The tie downs are excellent quality, all hardware arrived with the kit, instructions were "OK", installation on rear tie downs a little tricky, but managed to do ourselves. Looking forward to some great camping adventures. Thanks for the GREAT service!
We had a hiccup with my order and it was lost in cyberspace for a day until I called and was able to get it going. Unfortunately, I needed them by Saturday and I ordered them Wednesday. They didn't ship until Thursday afternoon and didn't arrive until Monday. The seller of the camper was kind enough to hold the camper for me, but it was touch and go there for a while.
Installing them was a challenging because the pictures in the guide were difficult to see which slowed the installation down a little. It took 2 of us about 3 hours to install them. Now that they are on the truck with the camper they seem to be working great! The only problem remaining is the front tie downs use a bolt to hold the tie down to the frame and it obstructs the passage, so it will only advance as far as the first pin making the second hole unreachable (it sticks out from the truck a few extra inches and makes the extension wobble up and down until the turnbuckle was installed).
great fit, works great, strong parts, works perfect! etrailer was excellent in making sure I received the correct parts. I highly recommend etrailer, if in doubt, call them, don't try and wing it, they will set you up with the correct parts! I will use etrailer again!
These things are heavy duty. Straightforward installation, just follow the instructions and videos. Fit like a glove and are rock solid. Thanks etrailer for fast shipping and Torklift for great products.
Absolutely the only way to correctly attach your truck camper. Pair these white Fastguns and it’s a great combo. I just went on a 5000 mile trip with my TC and never moved an inch.
They seem stout and were easy enough to install. I added my own 2” square rubber caps to the ends to keep road debris out when they’re not in use, those should be included. For $850 the packaging could use some work. They arrived all banged up, the “high impact powder coat” is worn off in several areas leaving bare steel exposed.
I ordered this kit for my 2018 Ford F150 'Heavy Half' regular cab, long bed pickup. The tie downs came with all the necessary hardware, good instructions, were easy to install with basic tools, and required no drilling. Shipping was very fast. I would absolutely recommend TorkLift tie downs and etrailer.com.
This is the only way the tie downs fit is this a safe way to strap it down
After selling previous truck camper and getting a new truck these tie downs are outstanding. The direct fit for year make model is awesome. Takes the guess work out installation. The install instructions were really good as well as etrailers videos. etrailer is the great providing product install walk thru. The adjustability of these tie downs made my life easier when I picked up my new TLRV 8 foot truck camper.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.