Product Experts Available Now!
Call 1-800-940-8924
THIS ITEM IS NOT A FIT FOR
2002 Acura RL
We'll connect you with nearby partnered installers who know this exact setup.
TorkLift Tie Downs - Custom Frame Mount - Front and Rear
Part Number: TL75DR
In Stock
$854.19
2002 Acura RL
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (914)
- Q & A (0)
- Videos (2)
- Photos
TorkLift Truck Camper Tie Downs - TL75DR
- Frame-Mounted
- Front Tie-Downs
- TorkLift
- Custom Fit
- Powder Coated Steel
These custom fit tie-downs give you the safest and most comfortable ride when hauling a camper. They mount to the frame of your pickup - no drilling required! With the arms removed, the brackets can barely be seen.
Features:
- Secures your camper to your truck bed
- Requires turnbuckles (sold separately)
- Ensures excellent handling
- Distributes the camper weight evenly and lowers the center of gravity
- Avoids a top-heavy setup that would be vulnerable to strong winds and sway
- Remains virtually invisible beneath your vehicle
- Remove the arms and you'll hardly know the brackets are there
- Adjusts to be the best fit for your truck and camper
- Extend arms out from truck body to clear bowed sidewalls and fenders
- Choose between 2 anchor holes for your turnbuckles
- Made of steel
- High-impact powder coat finish adds an extra layer of protection
- Uses pre-existing holes in the frame - little to no drilling required
- Mounts tight to your vehicle's frame - minimal loss of ground clearance
- Includes 2 front tie-downs, 2 rear tie-downs, and installation hardware
- Made in the USA
- Lifetime warranty
A Safe Ride is a Comfortable Ride
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Don't Ruin Your Truck's Looks
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Custom Fit, No-Drill Installation
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Securing Your Camper
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
C2218 Tork Lift Truck Camper Tie Down - Front Frame Mount - Custom Fit
C3214 Tork Lift Truck Camper Tie Down - Rear Frame Mount - Custom Fit
Video of TorkLift Tie Downs - Custom Frame Mount - Front and Rear
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for The Low-Down on the TorkLift Tie Downs-TL75DR
Hi there. I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Torklift custom frame-mounted camper tie-down set. These tie-downs are going to provide the attachment points that you need at the front of your truck bed, so that you can secure your bed-mounted camper in place. This is just going to be the two front tie-downs, the rear tie-downs are sold separately, but you can't find them as a related product on the product page for these. These are going to be a custom fit.
They're designed specifically to fit the 2014 through 2018 Chevrolet Silverado and GMC Sierra 1500 with the 5 1/2 foot bed and the Crew Cab. Now, keep in mind, because of the way these fit, it is going to be required that your Silverado and Sierra 1500 do not have a board or step underneath the truck bed, and that you do have either a factory installed hitch or a non-Torklift aftermarket hitch because those mounting points are going to be the same with the Torklift hitch and this tie-down system. So, if you have that 2014 to 2018 Silverado or Sierra 1500, this is gonna be a great kit for you. The brackets will fit tight to your frame, so you're not gonna lose any ground clearance. And because they are a frame-mounted, it's going to give you excellent handling.
It's gonna be a lot more secure than having your camper tied down to the top of your truck bed. It's gonna be a lot less top heavy, so it's gonna better distribute the weight, keep the setup a lot more secure for you. Another huge benefit to this system is that these are going to be a removable. So, our tie-down inserts are going to be able to be removed from our frame-mounted receiver brackets. So, the receiver brackets are going to stay installed all the time, but then we can remove these tie-down inserts very easily.
And so, then you of your vehicle. So it's going to give you that nice factory sort of look, but then when you're ready to put your camper in place, just slide these in. You can see, we do have these two different notches here to determine how far they're going to stick out. So if you have a little bit wider camper, you can go to that first notch, or if your campers a little more narrow, you can go to that second opening there, and then you'll just pass your pin through. And that's going to give you that nice, secure connection for your turnbuckles to attach to so that you can have your camper securely attached to your frame.
So this does have a powder-coated steel construction, so it is going to hold up really well for you. You are going to get the two front front tie-down inserts, the frame brackets and all the hardware that you're going to need to get this installed as well as instructions to walk you through that process. And we do include pictures in there as well. So very simple way of adding a nice, secure connection for your truck bed camper. The system is made here in the USA. So you can trust it's made to the high quality standards that we've come to know and trust for products that are made here in the US. And it does come with a limited lifetime warranty. So if you we're to have any problems with it, you're more than welcome to reach out to us here at etrailer.com. So like I said, the rear tie-downs are sold separately. You can find them on the product page for these front tie downs, but I really like the design of these. I like how these arms are removable, so you don't have that permanent tab on the back of your truck cab that kind of takes away from some of the look, but having it mounted to the frame is going to be very stable for you. So that completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..
Ratings & Reviews
4.7
914 reviews
by:
Straw
08/22/2025
After selling previous truck camper and getting a new truck these tie downs are outstanding. The direct fit for year make model is awesome. Takes the guess work out installation. The install instructions were really good as well as etrailers videos. etrailer is the great providing product install walk thru. The adjustability of these tie downs made my life easier when I picked up my new TLRV 8 foot truck camper.
by:
Paul
09/12/2025
This is the only way the tie downs fit is this a safe way to strap it down
Lazer S.
9/16/2025
It definitely is safe the way you have them, Paul! In a perfect world, the turn buckles would be perfect vertical, but this an imperfect world and not all campers have the attachment points in the same place. If you take a look at some of the installed pictures on the TorkLift Locking FastGun Turnbuckles # TLS9529-2-LK page, you can see most of them are at an angle. It's perfectly normal. Are you running any suspension enhancement on your Silverado?
Paul
9/27/2026
These tie downs are great, so easy to use. Camper never budged a hair
Andrew N.
9/27/2026
@Paul That's what we like to hear! Torklift makes some really solid parts. That camper looks really good on that truck!
by:
Bob
10/31/2024
2018
Ford
F-150
I ordered this kit for my 2018 Ford F150 'Heavy Half' regular cab, long bed pickup. The tie downs came with all the necessary hardware, good instructions, were easy to install with basic tools, and required no drilling. Shipping was very fast. I would absolutely recommend TorkLift tie downs and etrailer.com.
Bob
11/1/2025
I have not had any issues at all with the tie downs.
by:
Rich
08/05/2026
2024
Ford
F-250 Super Duty
They seem stout and were easy enough to install. I added my own 2” square rubber caps to the ends to keep road debris out when they’re not in use, those should be included. For $850 the packaging could use some work. They arrived all banged up, the “high impact powder coat” is worn off in several areas leaving bare steel exposed.
Kate F.
8/10/2026
Thanks for the pictures Rich. We will be reaching out =)
by:
Travis
04/03/2026
2019
Ram
3500
Product arrived quickly and install was simple with supplied parts, instructions and tools.
Heather A.
4/10/2026
Looks great! What kind of camper do you have?
by:
Megan
10/11/2025
2006
Ford
F-250 Super Duty
I did a lot of research to find the right kind of frame mounts for my dads truck. Lots of local RV places didn't even know what I was looking for, or quoted me for the wrong parts. After I was certain I found the right tie downs, I contacted etrailer customer service chat representative and they were a great help at confirming the parts I found would in fact fit my dads truck. My husband and dad installed them in less than 2 hours. The parts came quickly and in excellent packaging/condition.
Lazer S.
10/14/2025
Install looks great, Megan! Especially for it only taking two hours! They were moving. : ) Happy we confirmed what you found as well. Tie downs can be a pain in the rear with all the options out there. Now I do have to ask though, have you guys thought about any kind of suspension enhancement for the rear axle? It's a little hard to tell, but it looks like the back is sagging a bit in your last picture.
Lazer S.
10/14/2025
@Megan Air bags are what I was going to recommend! Great minds think alike. : )
With them being fully adjustable, they are definitely the way to go. They can change the unloaded ride a little, but not nearly as much as some other ways of doing it that are not adjustable.
Sounds like you guys are doing everything right to me. Let me know how it goes!
by:
Robert
07/16/2026
2018
Ram
3500
Great product! Fits perfect to the frame and very good quality materials. Even fit perfectly with my rock sliders.
by:
Clay
07/30/2025
Scion
tC
Absolutely the only way to correctly attach your truck camper. Pair these white Fastguns and it’s a great combo. I just went on a 5000 mile trip with my TC and never moved an inch.
Clay
7/31/2026
A year later and I would not do anything different. Absolutely the best system available especially paired with the fast guns. The camper is solid mounted and does not move. Yet can still be off loaded in just a few minutes. Remember good stuff isn’t cheap and cheap stuff isn’t good.
Christopher H.
7/31/2026
@Clay Happy to hear the # TL86NR are working well and keeping your setup solid. Paired with the fast gun turnbuckles is about as good as it gets. What type of in bed camper do you have?
by:
Justin
09/21/2026
1996
Ford
F-250 and F-350
Really disappointed for the cost. First of all it says several times in the description that it requires no drilling. That’s not the case at all. I had to drill 12 holes in my truck frame. The bolts included for the top mounting bracket were the incorrect length so I had to purchase longer grade eight bolts to install as suggested by the manufacturer with a lock washer and nut. The cheaped out on spacers (like shown in the directions) and included huge washers and to top it off the slide in mounts were all scraped up and have peeling powder coating. I feel like I got absolutely ripped off.
by:
Nate
03/17/2026
1996
dodge
Ram Pickup
Fit perfectly on my 96 Dodge Ram 2500. I recommend this product.
by:
Richard C
10/02/2026
2019
Ram
2500
These things are heavy duty. Straightforward installation, just follow the instructions and videos. Fit like a glove and are rock solid. Thanks etrailer for fast shipping and Torklift for great products.
by:
Viviana
06/03/2026
Love it!! Works great!!
Kate F.
6/5/2026
Great set-up Viviana!! Glad to see you went with the best =) Where did you go for your first trip?
by:
Larry S
01/11/2026
This kit is a solid support system, very beefy. The tie down points on your camper will get ripped out before this would fail.
Nick S.
1/12/2026
I love these TorkLift tie downs, and it is great to hear you are liking the quality as well. What kind of truck camper are you going to be running with these?
by:
Charles
08/18/2026
great fit, works great, strong parts, works perfect! etrailer was excellent in making sure I received the correct parts. I highly recommend etrailer, if in doubt, call them, don't try and wing it, they will set you up with the correct parts! I will use etrailer again!
Kate F.
8/20/2026
We appreciate the kind words Charles! Where did you take the in-bed camper for the first trip?
by:
Tim
08/09/2026
2011
Chevrolet
Silverado
We had a hiccup with my order and it was lost in cyberspace for a day until I called and was able to get it going. Unfortunately, I needed them by Saturday and I ordered them Wednesday. They didn't ship until Thursday afternoon and didn't arrive until Monday. The seller of the camper was kind enough to hold the camper for me, but it was touch and go there for a while.
Installing them was a challenging because the pictures in the guide were difficult to see which slowed the installation down a little. It took 2 of us about 3 hours to install them. Now that they are on the truck with the camper they seem to be working great! The only problem remaining is the front tie downs use a bolt to hold the tie down to the frame and it obstructs the passage, so it will only advance as far as the first pin making the second hole unreachable (it sticks out from the truck a few extra inches and makes the extension wobble up and down until the turnbuckle was installed).
Installing them was a challenging because the pictures in the guide were difficult to see which slowed the installation down a little. It took 2 of us about 3 hours to install them. Now that they are on the truck with the camper they seem to be working great! The only problem remaining is the front tie downs use a bolt to hold the tie down to the frame and it obstructs the passage, so it will only advance as far as the first pin making the second hole unreachable (it sticks out from the truck a few extra inches and makes the extension wobble up and down until the turnbuckle was installed).
by:
Dennis
09/09/2025
2021
Ford
F-250 Super Duty
Not a good experience so far. Torklift product was defective and they sent the wrong size bolt fish wires. Took 3x as long to install as should have due to wrong size fish wires. Torklift is not very responsive on the solution to the defective part. Torklift did not drill one of the holes in the tie downs
by:
Bruce
08/08/2026
Ordered for 2025 GMC 3500HD to carry our Arctic Fox slide in camper. Kits were shipped right away and arrived in Anchorage in 5 days (as ordered). The tie downs are excellent quality, all hardware arrived with the kit, instructions were "OK", installation on rear tie downs a little tricky, but managed to do ourselves. Looking forward to some great camping adventures. Thanks for the GREAT service!
by:
Paul
08/20/2026
2024
GMC
Sierra 2500
I would say that the Torklift kit fit my 2024 GMC sierra pro crew cab perfectly the shipping to Canada took 5 days which I thought was fast delivery and it shipped the same day it was ordered
by:
Seth
10/23/2026
2027
Ford
F-350 Super Duty
The product itself is GREAT and fits PERFECTLY. I'd give 5-stars if packaged properly to ensure the paint stayed whole as it left the factory. Instead some of the metal pieces showed up dinged and now will rust prematurely. Customer service is always solid with etrailer.
by:
Scott
10/07/2026
The camper tie downs are still working great.
by:
Thomas
07/21/2026
2016
dodge
Ram Pickup
Second set of Torklift camper tiedown brackets I have purchased. 1999 Dodge 2500 and 2016 Ram 3500. Fit good. No drilling. I would buy again. Good product. (I am a certified ASME, AWS, API, welder and fabricator). No hype, just fact.
by:
Troy
06/22/2026
2021
Ford
F-250 Super Duty
Did an awesome job installing all 4. And would highly recommend to everyone who needs it done.
by:
Tim
11/05/2026
Relatively easy to install with instructions and perform well. Quick to remove and put on as well.
by:
Dale C.
09/15/2025
Absolutely fit like a glove on our Ram truck. Disconnecting the emg. break was a challenge only because the tension nut was rusted. Other than that install was a breeze.
Gwendolyn Y.
9/18/2025
Install looks great, Dale! Where're you headed off to now?
Gwendolyn Y.
10/1/2025
@DaleC Now the anticipation for Spring begins!
by:
ThatDennis
05/30/2026
2023
Ram
2500
With the exception of removing the emergency brake lines. I could have done this job of mounting the front and rear mounts in under two hours, instead of three. Excellent design and looks great!
Kate F.
6/5/2026
I am happy to see you went with the best ThatDennis =) Have you been able to get out for your first trip?
25
914
true
Show More Reviews
See what our Experts say about this TorkLift Truck Camper Tie Downs
Info for this part was:
Updated by:
Lindsey S
Updated by:
Wilson B
Updated by:
Alex H
Updated by:
Amanda K
Video Edited:
Dustin K
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Straw
8/24/2026
A year later, no issues with tie downs, except normal wear and tear and metal to metal wearrust progression. These tiedowns are designed great and fit function was clearly created by someone who knows not only design but install ! E-trailer is “the” place to buy rv, camper, towing etc products - the install videos are sooooo helpful ! Thx ET !