bing tracking image
  1. Truck Camper Tie Downs
  2. TorkLift
  3. Frame-Mounted
  4. Front Tie-Downs
  5. Custom Fit
  6. Powder Coated Steel
THIS ITEM IS NOT A FIT FOR
1977 AMC Matador
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
TorkLift

TorkLift Tie Downs - Custom Frame Mount - Front and Rear

Part Number: TL22VV
In Stock
$854.19
Truck Camper Tie Downs
Not Confirmed to Fit

1977 AMC Matador

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
These custom fit tie-downs give you the safest and most comfortable ride when hauling a camper. They mount to the frame of your pickup - no drilling required! With the arms removed, the brackets can barely be seen. Great Prices for the best truck camper tie downs from TorkLift. TorkLift Tie Downs - Custom Frame Mount - Front and Rear part number TL22VV can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (923)
  • Q & A (0)
  • Videos (6)
  • Photos

TorkLift Truck Camper Tie Downs - TL22VV

Highlights

  • Custom Fit for Your Vehicle: Mounts to existing attachment points
  • Damage-Free Install: Bolts to existing frame holes with little to no drilling or truck mods.
  • Stable, Safe Ride: Frame mount spreads camper weight low and even for better handling.
  • Clean Look When Unused: Removable arms leave brackets barely visible under the truck.
  • Tough for Long Hauls: Steel construction with high-impact powder coat resists rust and wear.
  • Full Mounting Kit: Includes 2 front tie-downs, 2 rear tie-downs, and all install hardware.
Made in USA

Features to know about

A Stable Ride for Long Trips: Frame-Mounted Security

These custom-fit, frame-mounted tie-downs keep your camper stable and your truck handling naturally even on long hauls. By attaching directly to the frame—the most solid part of the vehicle—they distribute camper weight evenly and lower the center of gravity. That helps prevent sway, bounce, or shifting on rough roads so your setup feels secure mile after mile.

Install Without Drilling: Custom Fit to Your Frame

You can bolt these tie-downs straight to pre-existing holes in the frame with little to no drilling required. The fit is completely custom, so you don’t need to cut or modify anything. Because they mount tight to the frame, ground clearance loss is minimal, and you keep the truck’s original structure intact.

Keep It Looking Clean: Low-Profile Design

When you’re not hauling a camper, just remove the arms—the brackets stay tucked up under the truck and are barely visible. That means you can keep your vehicle looking clean without bulky hardware hanging down or sticking out.

Truck showing TorkLift frame-mounted tie-down brackets tucked under the frame with arms removed, demonstrating minimal visibility and clean appearance.

Built Tough for Real-World Use: Powder-Coated Steel

Made of steel and finished with a high-impact powder coat, these tie-downs are built to handle rough conditions and resist corrosion. The durable finish adds an extra layer of protection so they stay strong even after years of travel through rain, salt, and dust.

Dial In Your Setup: Adjustable Extension Arms

Each arm has two pin holes so you can extend it out from the body for extra clearance around fenders or sidewalls. You can also choose between two anchor holes for your turnbuckles (sold separately), helping you fine-tune tension and angle for a balanced hold that keeps your camper firmly in place.

Close-up of TorkLift tie-down arm with turnbuckles attached to a truck frame, showing secure camper anchoring setup.

Specs

Construction and Material

  • Material: Steel
  • Finish: High-impact powder coat

Design and Fit

  • Mount Type: Frame-mounted
  • Installation: Uses pre-existing holes in the frame – little to no drilling required
  • Fit: Custom fit
  • Configuration: Front and rear tie-downs
  • Anchor Options: Two holes in the attachment plate to choose between 2 anchor holes for turnbuckles
  • Adjustability: Extends arms out from truck body to clear bowed sidewalls and fenders
  • Clearance: Mounts tight to your vehicle's frame – minimal loss of ground clearance
  • Visibility: Remains virtually invisible beneath your vehicle when arms are removed

Included Components

  • Included: 2 front tie-downs, 2 rear tie-downs, and installation hardware

Performance and Usage

  • Purpose: Secures your camper to your truck bed
  • Handling: Ensures excellent handling by distributing camper weight evenly and lowering the center of gravity
  • Load Stability: Avoids a top-heavy setup vulnerable to strong winds and sway
  • Installation Method: No drilling required
  • Compatibility: Requires turnbuckles (sold separately)
  • Country of Origin: Made in the USA
  • Warranty: Lifetime warranty

Diagram showing recommended camper tie-down placement and anchor point alignment to prevent shifting and improve stability.

C2220 Tork Lift Truck Camper Tie Down - Front Frame Mount - Custom Fit

Replaces C2213

C3216 Tork Lift Truck Camper Tie Down - Rear Frame Mount - Custom Fit





Video of TorkLift Tie Downs - Custom Frame Mount - Front and Rear
Video Thumbnail Video Player Dialog

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Installation: TorkLift Tie Downs on a 2016 Chevrolet Silverado 2500

Speaker 1: Today on our 2016 Chevrolet Silverado 2500 we're going to be taking a look at and showing you how to install the Torklift Custom Frame Mounted Camper Tie Downs for the front, part number TLC2220. Here's what our camper tie downs look like once they're installed. Now, we always do recommend using four tie down points, so we're using it in conjunction with the rear as well. Now, if you need some of the rear tie down points, you can pick some up on our website using part number TLC3215.These are frame mounted tie downs, which is going to give you a very stable point to mount your camper to. Now, the frame style tie down is going to have a big advantage over the bed style because we're not going to have to worry about any bed damage or drilling into our bed or bumper causing rust down the line. It's also a lower attachment point, which is going to benefit us because of our camper being up so high, it's going to take some of the stress off from having that top-heavy load.Now, since it's mounted to the frame we're not going to lose any ground clearance, because as you can see, it's going to come in and go up to our frame where our frame is actually going to hang down lower farther forward.

I know a big concern a lot of you might have is if it's going to work with your running boards. Well, as you can see, we have our factory running boards on here, and it's not going to interfere at all. One feature that I know you're going to like is the fact that the arms here are removable. We come to this pin, we can pull the clip and remove the pin. Then we can actually remove the arm completely and it's virtually invisible and you won't have to see that sticking out.Our arms are going to have two holes, and that's going to accommodate different width campers.

If you have a rather wide camper you can use the outer one, or you can use the inner one if it's not that wide. Then simply just flip the pin in and secure it down with the clip. Now, our camper tie downs are going to feature a steel construction with a nice black powder coat finish, so you know it's going to look nice for a long time. Now that we've seen what they look like and we've gone over some of the features, let's show you how to get them installed.To begin your installation, we're going to need to find our leaf springs on the back axle, and we're going to find the front mount, and this is where we're going to be starting working at. If we look right towards the inside of our spring perch, we're going to notice that there's going to be a rather large access hole in there.

If we come to the front of our spring perch, there's going to be a rather small hole that we can reach from the inside.You're going to want to take your fish wire and take the coiled end and feed it in through the front of the spring perch in that small hole, and you're going to want to feed it through until it comes out the back access hole so you can grab it. Then we can take our square bolt, you're going to want to feed it on and thread it onto your pull wire until it's nice and secure and it's not going to drop. Then we're going to feed our square bolt through the access hole until we can pull it out. May take a little bit of maneuvering until it comes out like that through the front of our spring perch. Then you're going to want to unthread your pull wire off the bolt, trying not to stretch it out because we will have to reuse this.The bolt we just pulled through the spring perch, if we just come forward we're going to see an oval hole in our frame.

Then if we continue to move forward, right by our emergency brake cable on our driver's side we're going to have a circular hole. Our goal is to take our pull wire with the coiled end through the oval hole, feed it through the frame, and then come out the circular hole. Now, I will say, it's going to take a little bit of patience, a little bit of time, but it is possible. You just need to start feeding it through, and if you need to you can take your finger, put it in there, see if you can feel the pull wire. Just kind of finesse it into place until you can get it pulled out. Now, once you have your coiled end coming out the round hole you don't want to let go or have this go all the way into the frame.Once you have your pull wire through the round hole, we're going to take our 1/2 inch by 2 inch bolt and we're going to thread it onto our pull wire. You're going to want to push it back into the frame. Now that we have our bolt in place, we're going to take our star washer, we're going to feed it onto the end of our pull wire and we're going to insert it into the frame. Then we're going to take our 1/2 inch plate washer and do the same thing.With all of the hardware through, we're going to go ahead and pull our pull wire up. It'll take a little bit of a wiggle to get all of our hardware and the bolt through. The end goal is to have the bolt go through the washer and through that plate, and coming out of the frame. Just want to be careful and try not to stretch that pull wire as much as you can. A quick tip is you want to leave that pull wire attached to the bolt. That way, when we start getting our other brackets in place, it doesn't fall back in the frame, and if it does we can just pull it right back out.Our frame we're going to have our bed support right here. If we go directly up we'll see that there's a bolt holding it in place. We're going to need to remove that bolt. Now, I'm going to be using an 18 millimeter socket to pull it out. Now we're going to want to grab our driver's side bracket, and the way you're going to know it's the driver's side bracket is with the long extension piece with the tab going in, we're going to have this cutaway here and the hole's going to be on top. The passenger side is going to be faced the other way, so if we have it sitting like this everything should line up. If not, nothing's going to line up. It's really not that hard to figure out which one's which.Once we have our bracket we're going to take our pull wire and we're going to go through the front hole. You're going to push the bolt through the front hole and our tab is going to line up in between the bracket for our bed. Then we're going to take that factory bolt that we just removed and we're going to secure it up top. Now, right now you only want to get this hand tight so we have a little bit of wiggle room and make any adjustments as needed.Now we'll get ready to take our pull wire off. Before we take it all the way off, what I'm going to do is I'm going to take a 1/2 inch flat washer and I'm going to thread it onto my pull wire and over and around my bolt and kind of push down on it. That way, I know the bolt's not going to fall in. Then I can pull my pull wire off, and it'll help keeping it from spinning. Then we're going to follow that flat washer up with a 1/2 inch lock washer, and then finally a 1/2 inch nut. Again, if you kind of push on that flat washer it'll help keep that bolt from spinning as much when you're tightening it up by hand.We're going to grab our other bracket here. Now, there is going to be two holes in one side and one hole in the center. We're going to want to line up the center hole on the back side of our bracket here and loosely put it into place. When we line up our hole, the slotted hole should line up with that bolt that we dropped down through our spring perch. Now, coming from the back side going out, we're going to take another one of our 1/2 inch bolts and we're going to slide it through our bracket to the outside, and we're going to follow it up with a 1/2 inch flat washer, lock washer, and nut. That's going to be the same combination of hardware we're going to put for the bolt that's coming through our spring perch; flat washer, followed by a lock washer, and then finally securing it with a nut.We can come back and start snugging up all of our hardware. For all of our 1/2 inch hardware I'm going to be using a 3/4 inch socket, and where there's a bolt going through that I can reach the head of it, I'm going to be using a 3/4 inch wrench to hold it. We'll go back and tighten up all of our hardware. We're going to come back, and using a torque wrench and that same 3/4 inch socket, we're going to tighten up all of our hardware to the specified amount in the instructions.With all of our brackets torqued we can grab the arm, you're going to want to slide it in, and there's two holes, so we're going to use the inner one. We're going to slide it in, and we can take the provided pin and clip, once we have the holes lined up we can slide it through and secure it down. Now, you're going to know that it's the driver's side because the thinner part is going to be facing towards the front. That way we know that everything's lined up properly.Now, to help us remember which one's which once we take them out, they do provide us with some stickers. That way we can label them and we're going to know where they go once we put them back in. After you have the driver's side done you can go ahead and do the same thing on the passenger side. That'll finish up your look at the Torklift Custom Frame Mounted Camper Tie Downs for the front, part number TLC2220 on our 2016 Chevrolet Silverado 2500.

Ratings & Reviews

4.7

923 reviews
5 Stars
(746)
4 Stars
(103)
3 Stars
(32)
2 Stars
(18)
1 Star
(24)
Review Sort Icon
by:
Works great!
by:
After selling previous truck camper and getting a new truck these tie downs are outstanding. The direct fit for year make model is awesome. Takes the guess work out installation. The install instructions were really good as well as etrailers videos. etrailer is the great providing product install walk thru. The adjustability of these tie downs made my life easier when I picked up my new TLRV 8 foot truck camper.
Straw profile picture

Straw

8/24/2026

A year later, no issues with tie downs, except normal wear and tear and metal to metal wearrust progression. These tiedowns are designed great and fit function was clearly created by someone who knows not only design but install ! E-trailer is “the” place to buy rv, camper, towing etc products - the install videos are sooooo helpful ! Thx ET !

Lazer S. profile picture
Etrailer Expert

Lazer S.

8/24/2026

@Straw Glad to hear they are still working well for you! And thanks for your kind words! ^___^ What had been your favorite spot to take your rig so far?
by:
This is the only way the tie downs fit is this a safe way to strap it down
Lazer S. profile picture
Etrailer Expert

Lazer S.

9/16/2025

It definitely is safe the way you have them, Paul! In a perfect world, the turn buckles would be perfect vertical, but this an imperfect world and not all campers have the attachment points in the same place. If you take a look at some of the installed pictures on the TorkLift Locking FastGun Turnbuckles # TLS9529-2-LK page, you can see most of them are at an angle. It's perfectly normal. Are you running any suspension enhancement on your Silverado?

Paul profile picture

Paul

9/27/2026

These tie downs are great, so easy to use. Camper never budged a hair

Andrew N. profile picture
Etrailer Expert

Andrew N.

9/27/2026

@Paul That's what we like to hear! Torklift makes some really solid parts. That camper looks really good on that truck!
by:
2018 Ford F-150
I ordered this kit for my 2018 Ford F150 'Heavy Half' regular cab, long bed pickup. The tie downs came with all the necessary hardware, good instructions, were easy to install with basic tools, and required no drilling. Shipping was very fast. I would absolutely recommend TorkLift tie downs and etrailer.com.
Bob profile picture

Bob

11/1/2025

I have not had any issues at all with the tie downs.

by:
2024 Ford F-250 Super Duty
They seem stout and were easy enough to install. I added my own 2” square rubber caps to the ends to keep road debris out when they’re not in use, those should be included. For $850 the packaging could use some work. They arrived all banged up, the “high impact powder coat” is worn off in several areas leaving bare steel exposed.
Kate F. profile picture
Etrailer Expert

Kate F.

8/10/2026

Thanks for the pictures Rich. We will be reaching out =)

by:
2019 Ram 3500
Product arrived quickly and install was simple with supplied parts, instructions and tools.
Heather A. profile picture
Etrailer Expert

Heather A.

4/10/2026

Looks great! What kind of camper do you have?

by:
2006 Ford F-250 Super Duty
I did a lot of research to find the right kind of frame mounts for my dads truck. Lots of local RV places didn't even know what I was looking for, or quoted me for the wrong parts. After I was certain I found the right tie downs, I contacted etrailer customer service chat representative and they were a great help at confirming the parts I found would in fact fit my dads truck. My husband and dad installed them in less than 2 hours. The parts came quickly and in excellent packaging/condition.
Lazer S. profile picture
Etrailer Expert

Lazer S.

10/14/2025

Install looks great, Megan! Especially for it only taking two hours! They were moving. : ) Happy we confirmed what you found as well. Tie downs can be a pain in the rear with all the options out there. Now I do have to ask though, have you guys thought about any kind of suspension enhancement for the rear axle? It's a little hard to tell, but it looks like the back is sagging a bit in your last picture.

Megan profile picture

Megan

10/14/2025

@LazerS Thanks for the reply! The truck is currently stock, but we are getting airbags and new shocks placed on the truck tomorrow. We were told by our local 4 wheel parts the airbags will help lessen the load on the back of the truck with the weight of the camper. Hopefully they gave us the correct information. If you have other suggestions, I am open to hearing them! Thanks!
Lazer S. profile picture
Etrailer Expert

Lazer S.

10/14/2025

@Megan Air bags are what I was going to recommend! Great minds think alike. : ) With them being fully adjustable, they are definitely the way to go. They can change the unloaded ride a little, but not nearly as much as some other ways of doing it that are not adjustable. Sounds like you guys are doing everything right to me. Let me know how it goes!
by:
Scion tC
Absolutely the only way to correctly attach your truck camper. Pair these white Fastguns and it’s a great combo. I just went on a 5000 mile trip with my TC and never moved an inch.
Clay profile picture

Clay

7/31/2026

A year later and I would not do anything different. Absolutely the best system available especially paired with the fast guns. The camper is solid mounted and does not move. Yet can still be off loaded in just a few minutes. Remember good stuff isn’t cheap and cheap stuff isn’t good.

Christopher H. profile picture
Etrailer Expert

Christopher H.

7/31/2026

@Clay Happy to hear the # TL86NR are working well and keeping your setup solid. Paired with the fast gun turnbuckles is about as good as it gets. What type of in bed camper do you have?
by:
1996 Ford F-250 and F-350
Really disappointed for the cost. First of all it says several times in the description that it requires no drilling. That’s not the case at all. I had to drill 12 holes in my truck frame. The bolts included for the top mounting bracket were the incorrect length so I had to purchase longer grade eight bolts to install as suggested by the manufacturer with a lock washer and nut. The cheaped out on spacers (like shown in the directions) and included huge washers and to top it off the slide in mounts were all scraped up and have peeling powder coating. I feel like I got absolutely ripped off.
by:
2017 Ford F-250 Super Duty
Overall great product and the installation isn’t terribly difficult. Only gripe is after spending $900 I was shorted 2 of the 1/4” pins. Had to use a bolt and nut to hold the tie down into the receiver to get my new camper home. Not the end of the world just disappointing
by:
2019 Ram 2500
These things are heavy duty. Straightforward installation, just follow the instructions and videos. Fit like a glove and are rock solid. Thanks etrailer for fast shipping and Torklift for great products.
by:
1996 dodge Ram Pickup
Fit perfectly on my 96 Dodge Ram 2500. I recommend this product.
by:
This kit is a solid support system, very beefy. The tie down points on your camper will get ripped out before this would fail.
Nick S. profile picture
Etrailer Expert

Nick S.

1/12/2026

I love these TorkLift tie downs, and it is great to hear you are liking the quality as well. What kind of truck camper are you going to be running with these?

by:
great fit, works great, strong parts, works perfect! etrailer was excellent in making sure I received the correct parts. I highly recommend etrailer, if in doubt, call them, don't try and wing it, they will set you up with the correct parts! I will use etrailer again!
Kate F. profile picture
Etrailer Expert

Kate F.

8/20/2026

We appreciate the kind words Charles! Where did you take the in-bed camper for the first trip?

by:
2011 Chevrolet Silverado
We had a hiccup with my order and it was lost in cyberspace for a day until I called and was able to get it going. Unfortunately, I needed them by Saturday and I ordered them Wednesday. They didn't ship until Thursday afternoon and didn't arrive until Monday. The seller of the camper was kind enough to hold the camper for me, but it was touch and go there for a while.
Installing them was a challenging because the pictures in the guide were difficult to see which slowed the installation down a little. It took 2 of us about 3 hours to install them. Now that they are on the truck with the camper they seem to be working great! The only problem remaining is the front tie downs use a bolt to hold the tie down to the frame and it obstructs the passage, so it will only advance as far as the first pin making the second hole unreachable (it sticks out from the truck a few extra inches and makes the extension wobble up and down until the turnbuckle was installed).
by:
2021 Ford F-250 Super Duty
Not a good experience so far. Torklift product was defective and they sent the wrong size bolt fish wires. Took 3x as long to install as should have due to wrong size fish wires. Torklift is not very responsive on the solution to the defective part. Torklift did not drill one of the holes in the tie downs
by:
Ordered for 2025 GMC 3500HD to carry our Arctic Fox slide in camper. Kits were shipped right away and arrived in Anchorage in 5 days (as ordered). The tie downs are excellent quality, all hardware arrived with the kit, instructions were "OK", installation on rear tie downs a little tricky, but managed to do ourselves. Looking forward to some great camping adventures. Thanks for the GREAT service!
by:
2024 GMC Sierra 2500
I would say that the Torklift kit fit my 2024 GMC sierra pro crew cab perfectly the shipping to Canada took 5 days which I thought was fast delivery and it shipped the same day it was ordered
by:
2027 Ford F-350 Super Duty
The product itself is GREAT and fits PERFECTLY. I'd give 5-stars if packaged properly to ensure the paint stayed whole as it left the factory. Instead some of the metal pieces showed up dinged and now will rust prematurely. Customer service is always solid with etrailer.
by:
The camper tie downs are still working great.
by:
2016 dodge Ram Pickup
Second set of Torklift camper tiedown brackets I have purchased. 1999 Dodge 2500 and 2016 Ram 3500. Fit good. No drilling. I would buy again. Good product. (I am a certified ASME, AWS, API, welder and fabricator). No hype, just fact.
by:
Relatively easy to install with instructions and perform well. Quick to remove and put on as well.
by:
Absolutely fit like a glove on our Ram truck. Disconnecting the emg. break was a challenge only because the tension nut was rusted. Other than that install was a breeze.
Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

9/18/2025

Install looks great, Dale! Where're you headed off to now?

Dale C. profile picture

Dale C.

9/30/2025

@GwendolynY Local travel testing it out then heading west in the spring, Getting everything setup and ready then put away for winter!!
Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

10/1/2025

@DaleC Now the anticipation for Spring begins!
by:
2026 Ram 3500
Order the kit. This is the second set I have ordered in the last few months. etrailer ships fast and makes sure you can track your shipments. Also notifies you every step of the way. I appreciate the follow through with keeping me informed at when my package will arrive. I tried to buy these direct from the manufacture but they wanted more than etrailer and I had to find back and front sets. They did not sell them in kits.

Also glad the etrailer doesn't play the game of shipping in the lower 48 states only BS, there are 50 official states ins the USA (51 if your counting Alberta)! Plus numerous US territories...
by:
2023 Ram 2500
With the exception of removing the emergency brake lines. I could have done this job of mounting the front and rear mounts in under two hours, instead of three. Excellent design and looks great!
Kate F. profile picture
Etrailer Expert

Kate F.

6/5/2026

I am happy to see you went with the best ThatDennis =) Have you been able to get out for your first trip?

25
923
true
Show More Reviews

See what our Experts say about this TorkLift Truck Camper Tie Downs


Info for this part was:

Employee Lindsey S
Updated by:
Lindsey S
Employee Wilson B
Updated by:
Wilson B
Employee Alex H
Updated by:
Alex H
Employee Amanda K
Updated by:
Amanda K
Employee Dustin K
Video Edited:
Dustin K

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.