Video Transcript for Taylor Made Deluxe Sewn USA Boat Flag Review

Ellen: Hey, everyone. I'm Ellen here at etrailer.com, and we're going to be taking a quick look at the Taylor Made Yacht Insignia Boat Flag. This gives a clear indication of your U.S. pride while you're out on the water and it is going to have that traditional yacht U.S. insignia.Let's take a closer look at this flag and see what makes it so deluxe. It is going to be a nylon construction on a nylon fabric, so it's going to be nice and durable, and stand out in the elements for a while.

Although you do want to take it down, if you're going through any kind of stormy weather, just to prevent any kind of undue damage. The fly end is going to be a four needle design. That basically means it has four hems to prevent that from getting any flyaways or getting frayed over time.Each of the stripes is individually stitched. These are each going to be a different strip of fabric that are then stitched together. On the Canton, we'll have that yacht insignia so we can identify our boat's nationality to other boats while we're in international waters or just proudly represent the U.S.

while we are in our yacht on American waters.On our hoist end, we'll have the two grommets to attach to the pole. They are going to have a diameter here, which I'll give you in just a second. It's about a half inch diameter. They are made of brass and they are spaced apart by about 17 and a half inches, maybe 17 and a quarter, roughly. The flag overall measures roughly 30 inches by 20 inches.

The measurements seem to never be quite perfect. There's always a bit of variance there, but should be a nice looking flag overall. It should last many years and it is made in the USA.Well, I hope this vide has been helpful in deciding if this is going to be the right flag for you. We do have a lot of other options available here at etrailer.com, so check them out. Thanks for watching..