Most Popular Tinted for Van

Product was excellent and the installation videos on the website were invaluable!

Bought this to replace original bath fan (Maxxair) when the raising mechanism broke. I ordered it from etrailer on a Wednesday, and it was delivered on Friday....super fast delivery. Easy install, and I think we will really like it's features (i.e. 10 speed reversible fan, rain proof cover).

Fan arrived quickly and was an exact replacement for our Hail storm damaged unit. Thanks eTrailer!

Our hunt club has 2 pit blinds that are used for waterfowl hunting. Each blind is essentially a concrete box with walls, floor and top 4 inches thick and dimensions of 12'x5'x5'. Each blind is buried to a depth of 5 foot to where the top is flush with ground level. Access is through the top using 24 inch wide manhole lids that are made of high density plastic. The cooler air inside of the blinds clashing with warmer air absorbed by the concrete and manhole lids at ground level caused condensation that made the inside damp and smelly. We only hunt 3 months each year, so needed a vent solution for the other 9 months the blinds were not in use. We also needed something that could be powered by DC voltage from a solar panel due to the remote location. In July 2015 we installed each fan into a manhole cover and used water-tight conduit and electrical boxes to run the wiring from the solar panel to each fan. Great solution! Once enough daylight hits the solar panel the fan blades start moving and run constantly until sundown. Will see how long these things last but so far so good

Fan installation is very straightforward. Perfect fit and looks and works great. Hardest part was removing old caulk - plastic scraper and patience worked well for me.JUST TAKE YOUR TIME.

This roof vent is a real game changer for us. It allows us to open and vent our teardrop, even in the rain. Design is sleek. Lock works well. Fan is excellent and quiet.

Delivered as promised in fine shape. MaxxFan fit perfectly in existing 14X14 opening. Simple install and is functioning as designed.

This fan was great. I had an issue initially with the motherboard and the company replaced it ASAP at no charge. Really good customer service and an excellent fan!.

Very nice addition to my Seismic. Should have came already with the trailer since the trailer is $$$$$. The remote is crazy BIG and its wall mount cradle is not design for RV use. Leave the remote in the wall mount cradle while in transport will soon produce a ejected/broken remote :(

Still good after a year, no issues. Controller batteries for remote seem to last about a year

Product description, fitment, construction materials, size, all matched the website. Very good product for replacing your vent on a trailer. Excellent support and shipping from company.

Installed this vent into my Haulmark Transport 6'x12' enclosed trailer. Installation was easy, I cut a 14.25" x 14.25" inch hole between two crossmembers in the roof and dropped it in place. Because the roof on this enclosed trailer is so thin, I used a piece of 3/8" plywood so sandwich between the interior garnish and actual vent. I cut the same size hole into the plywood and left a 2" lip all around. I use 28 #8 x 5/8" stainless screws to hold it in place, pre-drilled with 1/8" bit. I then used roofing tar to seal the vent and put masking tape all around, leave 1" from the flange to ensure good coverage. I then removed the masking tape, leaving nice clean lines. Interior garnish is held in place by #8 x 3/8" galvanized screws. Huge kudos to etrailer for carrying such awesome products for great low prices and offering super cheap shipping to Canada!

The 2250 Fantastic Fan still working great after a year! Pretty quiet and the thermostat is a handy feature that works well. In my application, it has a tendency to open itself while driving around unless it has been cranked down fairly hard. Driving with it open doesn't seem to be a problem other than the outside noise that comes in that way. My application was a fiberglass raised top on a Chevy van. I had to make a wood frame as the fiberglass did not provide a flat surface to mount to. Photos below show inside frame, fan, and insulation.

Excellent unit, does what we require. Replacing really original units that were installed on my old Airstream

Great fit- exactly as original- package arrived late,beat up,because shipped from Missouri- then went to Boston then made way down to Florida- *but contents were not damaged.

I received my order but it was a day late and they refunded my shipping charges . Ty Etrailer....I will always do business with u...much love...

The (2)fan lid black plastic mounting bosses broke as if they had deteriored in the sun. This lower the lift arm to flop down and keep the lid from opening. Trying to figure a method to repair.

This powered roof vent is great! I mounted it above the cab in my 1991 high-top conversion van to provide cool air when camping in it. Fan is more powerful than I expected! I rarely need to switch it to high speed. It's quiet enough for sleeping just a few feet away. Installation was easy and dimensions were accurate. Controls are easily accessible. Auto temp control is really nice when outdoor temps are dropping during the night so we don't get too cold. Rain sensor triggers to close cover after only a few drops of rain! Reversible fan is nice.

Arrived quickly and was easy to install.

I have a 16ft 1972 Brougham travel trailer,and my old vent lid disintegrated.I wasn't sure which vent lid to get.I measured the square hole on the roof and it is 13 inches square. I also needed to be sure of the hinge.The hinge portion on the vent cover is 9 inches.After I removed the screws from the vent lid raising mechanism, and disconnected it from the vent lid rail,I went up top,and opened up one side of the rolled metal hinge.Then the roof vent lid slides off to one side.Then you just slide the new roof vent lid onto the hinge,and bend down the tab to secure it.You then reattach the mechanism inside the trailer.Its actually very easy to do,with just a Phillips and straight slot screwdriver. I attached photos of what remained after my lid was blown off completely which shows the hinge and lifting rail that come with a new roof vent cover attached.I also showed a close up of the hinge and the little tab that is bent in on both sides to keep the lid from sliding sideways. Finally I have pics of the new lid installed.I was happy with this product,and didn't realize you could just replace the vent lid so easily.

Great instructions. Very nice product. Installed nicely and looks beautiful. You will need to buy the butyl tape to properly install and of course the self leveling roof sealant.

This vent fan helps a lot with keeping my 7x14 cargo trailer cool. Did a lot of modifications with my trailer especially insulating the ceiling and now with this fan makes it better and cooler. The lid is always open to let the heat out because i have the MaxxAir II cover so rain cant get in. Fan runs better with more or bigger airflow from the side vents when all doors are closed so i added the Redline II popup vent and it works great. Fan does not slow down. Im glad i got this and will be purchasing again when i get another trailer. Thanks ETrailer

Installation was easy and a perfect fit for my 2021 Airstream 16RB (replacing a 3 speed Fan-Tastic unit). I like the speed range of this fan, and how quiet it is when set to 50% and lower, big improvement. However, all the other features (rain sensor, temperature setting, reversible direction), not so impressed with. I don't like the fact the fan turns on at full speed every time I switch on the battery disconnect (applying 12v power). Why is this necessary? I also have a hard time determining which direction fan is pushing air (pulling air into the trailer does not produce strong air flow), and maybe the vent cover is preventing good air flow. It would be nice if there was an LED on the remote or unit to indicate direction (forward or reverse). I know that sounds silly, but I put my hand up to the unit and can't feel which direction the air is flowing, it's just moving around. I ignored recommendations to go with a Max Air unit, and if I had it to do over, I would install a Max Air instead with built-in cover. I may even do that anyway just to have a better fan and cleaner look.

This was a great addition to our trailer. This is a remote control model because the ceiling is too high to reach from floor level. With two high volume fans we can circulate a trailer full of air quickly. I wouldn’t be without a fan like this.

Vent was easy to install, really didn't need the instructions. I would have appreciated a template for the hole though. That way I can just throw the template up and cut along it. A recommendation to reinforce the underside with something (I used 2x2s) might be helpful as well. You do say to align it with a joist, but who's really going to have multiple joists within 14 1/2" from each other? Otherwise, it looks great. I figured you have multiple images of the vent itself so I figured an image of how I reinforced it would be the most helpful for future installers. Thank you. Aaron

Product material and build is solid. Easy to install. I like the smoke colored cover, lets in the right amount of sun (we dry camp in the Southwest a lot). The fit between screen and frame with the open/close knob was off by about 1/4 inch in depth. Was able to adjust the knob mounting position down so as to insure a tight fit between screen and beauty ring. We have an eighteen-year-old rig, so it is challenging to find replacement parts that fit as original. But it fits great now! great web site - easy to drill down to appropriate parts. Thanks again.

I received the product today. Customer service to this point has been excellent. It will be about a week before trailer repair folks will be here to install, however, I did open and inspect the product. It was not protected in the box and is wedged into the box. I pray it will not be damaged.

Good replacement product for my RV power vent. Fast shipping too! And a great price.

Fan arrived in good shape on schedule. There were no wiring instructions or mounting hardware

I am very pleased with the quality of the vents. The prices were good too. Very happy with my purchase and how quick the vents came. Thank you