# 1
DeeZee Truck Bed Auxiliary Tank - Rectangle - Aluminum - 39 Gallon
I pull a 42-foot fifth wheel with a ram 3500 diesel. I purchased this tank to extend my range before I need to fuel up again. With this extra 40 gallon capacity I can usually get to a campsite and then unhook and find cheaper diesel away from the interstate. I installed a inline fuel pump with a switch on the dash so when I get down to a quarter of a tank I flip the switch and keep on rolling. A great product from etrailer, well-built and serves my purpose.
So far so good, ready to mount it in the back of the pickup and put lines right to the fuel tank fill hose
# 2
DeeZee Red Label Truck Bed Tool Box - Low-Profile, Crossover Style - Alum - 8 Cu Ft - Black
The unit is great and serving it's purpose. But the Chinese locks are a problem when one breaks the key off and needs a replacement.
# 3
DeeZee Red Label Truck Bed Tool Box - Low-Profile, Deep, Crossover Style - Alum - 11.7 Cu Ft - Black
After 1 year the box still looks great and functions flawlessly..No chipping, cracking, or fading of the paint.. The box lid opens and closes beautifully and the lock works correctly..After 1 year I am very happy with this toolbox, it is a well-made, high quality item that I would buy again...
# 4
UWS Secure Lock Low Profile Truck Bed Toolbox - Crossover Style - 8.6 cu ft - Matte Black
Looks fantastic on my truck. Provides ample storage. I love the interior carpet. Looking forward to getting many years of use out of this.
# 5
DeeZee Red Label 5th Wheel Tool Box - Wide, Utility Chest Style - Aluminum - 14.9 Cu Ft - Black
I will work perfectly. I am putting it on a 10'by 6'utility trailer. The trailer bed is going to have indoor outdoor carpeting on the bed. I will use it to carry pontoon boats, and the chest for oars, and life vests.
This tool box has worked flawlessly for the year it has been installed. No issues with access while towing my fifth wheel. All I have done is keep the locks and handles lubicated. Highly recommended.
# 6
UWS Truck Bed Toolbox - 5th Wheel Series Chest - 6 cu ft - Bright Aluminum
The toolbox was installed in a 2010 Dodge 1500 Quad cab with a 6' bed. The bed had a bedrug previously installed and after the tool box installation I installed red LED's under the bed rail with a on/off switch near the tailgate.
It’s doing what it’s supposed to be doing! Holding my stuff. The only thing that I don’t like are the latches are a little difficult to open .
# 7
DeeZee Blue Label Truck Bed Tool Box - Crossover Style - Aluminum - 12.8 Cu Ft - Silver
# 8
DeeZee Specialty Series Transfer Tank/Tool Box Combo - Steel - 50 Gallon - 4.1 Cu Ft - Black
size is accurate fits my 13 ram 2500 with gooseneck trailer attached no problem great service from etrailer as always
# 9
UWS Low Profile Truck Bed Toolbox - Narrow Crossover Style - Slim Line - 6.5 cu ft - Gloss Black
Box is has been good and fits the needs I had. The the slim box, leaves more bad for short beds. It did show up with a small ding when delivered, but it was on the back side so I didn’t worry about it.
Top notch works like a charm
# 10
TruXedo TonneauMate Truck Bed Toolbox - Crossover Style - Poly Tub with Aluminum Rails
I installed this box in conjunction with my Bak Revolver X4, on my 2015 Chevy Silverado. The box itself is good, I wish that both sides of the cover had a latch, it feels like the right side of the box is lifted higher than the locked side, I don't know if water can get in, it sits under my tonneau. It will work with the X4 cover, however, you need to mount the box brackets to the bracket that attaches to the bedrails first, otherwise you cannot fit the bracket in between the two rails, it sandwiches it. Took two guys about an hour and a half to get it set correctly. Not a deal breaker, but there were some cuss words. After it was aligned and tightened down, my tools fit in there just fine, and I was happy. With my truck, I can still slide a 6' A frame ladder under the box, however, I have to put it under feet first. Just a heads up for any weekend side-jobbers out there.
Overall the box worked well. My only issue is it takes up far too much of the bed and does not work well with covers that also have side brackets. The two bracket systems together put the box more to the middle of the bed.
# 11
UWS Truck Bed Toolbox w/ Pull Handles - Crossover Style - Low Profile - 8.6 cu ft - Bright Aluminum
So far, so good. It arrived in very secure packaging, which is always a good sign. I just installed it - went in easily, no problems. Will be loading it up soon!
The tool box works great. Works for what we needed and is low profile.
# 12
DeeZee Specialty Series Truck Bed Transfer Tank - Square - Aluminum - 55 Gallon - Silver
# 13
UWS Low Profile Truck Bed Toolbox - Narrow Crossover Style - Slim Line - 6.5 cu ft - Bright Aluminum
I have a short box Ram 2500. I also pull a 5th wheel camper. A regular sized box would interfere with the hitch. This box works perfectly. It is not super heavy duty, but a good value for the price.
Love it!
# 14
UWS Truck Bed Chest - Wedge Series - Offset Lid - Notched Box - 12 cu ft - Gloss Black
Well built and heavy..... Fits below the bed for 5 wheel clearance and a clean look
Excellent tool box and surprisingly durable, would purchase a second one but this one has more than enough storage space for a carry along tool box, all your fluids, straps, tire chains, and some other stuff??
# 15
DeeZee Red Label Truck Bed Tool Box - Crossover Style - Aluminum - 8.4 Cu Ft - Black
# 16
UWS Truck Bed Chest - Wedge Series - Offset Lid - 9.4 cu ft - Bright Aluminum
# 17
DeeZee Specialty Series Driver's-Side Wheel Well Tool Box - Aluminum - 2.2 Cu Ft - Black
Just picked it up, everything looks good. Now it gets customized to fit in my Jeep Cherokee XJ,,,,,,,,,,,,, ty
# 18
DeeZee Auxiliary Tank - Rectangle - Aluminum - Brite-Tread - 106 Gallon
# 19
DeeZee Specialty Series Wheel Well Tool Box with Drawers - Steel - 1.9 Cu Ft - Black
I like the size and drawer arrangement, but the front door hinge is starting to rust.
# 20
UWS Truck Bed Toolbox - 5th Wheel Series Chest - 6 cu ft - Gloss Black
The toolbox is just the right height for my 5th wheel towing. I installed fasteners in the front of the bed and rear next to the tail gate so I could move the box forward or back depending on what I was going to carry with the 5th wheel. I am very satisfied with the box.
Installation: UWS Deep Truck Bed Toolbox on a 2013 Ram 2500
What's up everybody It's AJ with etrailer.com Today we're gonna be checking out this UWS crossover style deep tool box on our 2013 RAM 2500. Now this is gonna be labeled a deep crossover style toolbox which means there is a little bit of a gap there between the bed and the bottom of the toolbox. It's about four inches from the raised portion of the bed. Now that might work with some lumber or some thinner things to slide under there but as you can see our small utility step ladder didn't quite fit under there. Just want to give you a good idea of how much space you have. Looking at the box you have two latches one on the passenger side, one on the driver's side.
Set up: UWS Truck Bed Toolbox on a 2013 Ram 2500
What's up everybody. It's AJ with etrailer.com. Today, we're gonna be checking out this UWS crossover style toolbox, it goes on the bed rails of your truck. And we're gonna be showing it to you on a 2013 Ram 2,500. I mentioned it was a crossover style toolbox. I wanted show you right away what that means.
Mount: UWS Truck Bed Toolbox on a 2013 Ram 2500
What's up everybody It's AJ with etrailer.com. Today, we'll be checking out this UWS truck bed toolbox. It's gonna be a low profile and crossover style and we're gonna put it on a 2013 Ram 2500. Right away I wanna get into what I meant by low profile and crossover style. So low profile means it's not gonna sit up that much above your bed rails. It's a little bit over two inches.
DIY 2013 Ram 2500 Installation for the UWS Truck Bed Toolbox
What's up everybody It's AJ with etrailer.com. Today, we'll be checking out this UWS Low Profile Crossover Style Toolbox. It's gonna be great for going in the back of your truck, we have it on a 2013 Ram 2500 today, and you can see how the crossover style works, it doesn't go all the way down to the bed, it leaves space for longer cargo, so it can still go in your bed and shut the tailgate. You can see the ladder fits in there really nicely. Let's check this out. So we went over the crossover style, let's talk about the low profile design.
Set up: UWS Deep Angled Truck Bed Toolbox on a 2013 Ram 2500
What's up everybody, it's AJ with etrailer.com. Today we're checking out this UWS crossover style toolbox and this is gonna be on a 2013 Ram 2500. It doesn't give you as much space at the bottom as some of the other crossover design ones do but it's gonna be a deep angle design. So you can see the angles I'm talking about there on either side, which is gonna give you better access to the tie down points here towards the front of your truck. Now we're talking about the space at the bottom. Let's go ahead and get that measurement now, get it outta the way.
How to Set Up Your UWS Truck Bed Toolbox on a 2013 Ram 2500
What's up everybody It's AJ with etrailer.com. Today, we'll be checking out this UWS crossover style toolbox. It's gonna sit up on the bed rails and we're putting it on a 2013 Ram 2500. Let's check it out. I said crossover style toolbox. And what that means is it doesn't go all the way to the bed of the truck.
Weather Guard Crossover Truck Tool Box Installation - 2013 Ram 2500
What's up everybody. It's AJ with etrailer.com. Today, we're gonna be checking out the Weather Guard truck box, toolbox for the bed of your truck and we're gonna do it on a 2013 Ram 2,500 today. You can see how it sits on the bed rails pretty nicely, even leave the little bit of space on the bottom, that way you can fit this ladder in there. And I don't have to sacrifice the whole bed space with using the toolbox to get organized. Let's check it out.
Setting up the UWS Truck Bed Toolbox w/ Pull Handles on a 2013 Ram 2500
What's up everybody. Adam here with etrailer today on Jake's 2013 Dodge Ram 2500. We're going to be taking a look at the UWS truck bed toolbox. We do have some options when it comes to this specific toolbox. One, we're going to have two different size options, we're going to have the 8.6 and the 8.4 cubic foot versions, but we're also going to have color options. So you can get aluminum like this but you can also get a glossy black powder coated finish or a matte black.
What our customers are saying:
"Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast."