Most Popular Yakima for Ford Ranger

The rack is great. Simple to install, extremely sturdy & very well designed. I drove it to Cars & Coffee yesterday & someone asked me what I needed to haul or if I merely installed them "because they look cool." The young lady, Janeth, that helped me was really great! Smart, polite, patient, & above all... knowledgeable about product. I would suggest selling the rack specific for Retrax bed cover. The amount of hardware left over when you add the adapter kit to the standard rack seems really excessive. Rather than be $169 add, it should be a deduct of at least that much.

I had a Thule rack for almost 10 years, but new truck came with a tonneau and the Thule I had was not compatible. This is very solid with the tonneau adapters.Its not as easy to adjust as the Thule but only adjusting a couple times a year, it's ok.

Works seamlessly with the retrax rollup cover and not too hard to install. Adjusting the height takes a little bit of work but that is only done on a very limited basis. Allows me to carry my kayaks, a cargo box if I need extra space or paddles & fishing rods so they don't get damaged by closing the tailgate on them.

I split two rack systems to allow us to carry larger ladders. Outstanding service and info from trainer to help make this happen! CSR reps were great to work with.

The Yakima Outpost HD bed rack is great, strong and sturdy. I would recommend etrailer.com if you are looking for truck accessories. Great customer service!

I think the bottle opener feature advertised should work! I emailed about that shortly after installing the product, even sending photos, and no one from your company every reached back out to me to resolve the issue.

Very sturdy. Great look. Worth the $ in my opinion.

Worked perfect for my 2024 Tundra with a Retrax pro XR tonneau cover. Installation was easy.

Very expensive but very high quality. Getting ready to take my Ranger with the kayaks to Florida behind my Motorhome. Tested on an expressway run before the big trip. Very stable and secure

Yakima product is very solid, as always. The T track adaptors do fit on the t-tracks on my tonneau cover on my '24 GMC Canyon. However, the Yakima t track rubber gasket adaptors do not quite fit the roll-n-lock M series XT tonneau cover I have without modification. I did have to cut down the outside of the rubber gasket as they are too tall, which forced the towers to angle in toward the middle of the truck. Once cut down it fit appropriately. Next, I had to cut the rubber gasket on the bottom of the middle of the tower, which overhangs the cover, as the cover has a lip that did not clear the rubber gasket when opening and closing. However the lip does clear the yakima towers when the rubber is removed so the cover does function normally once the rubber feet are modified. I'm sure yakima would not condone this, but it should not have functional consequences and so still fit my needs.

Service was Unbelievable. Fantastic , couldn’t get any better ther than someone driving a car from wentsville to my house. Thank you all, keep up the good work, I need more stuff.

Yakima products are renowned for their ease of assembly, installation, and sturdy craftsmanship. The BedRock HD does not disappoint in any of these categories. We bought the BedRock HD Truck Bed Rack with the hope that it would make loading/hauling our kayak and SUP more user friendly when used in conjunction with the LongArm Extension. Another factor we considered when purchasing this combo was how securely the watercraft would ride for 10-12 hours of driving time. Though we have yet to make a trip of that length, both watercraft are extremely secure once loaded and strapped down. I am able to make the truck bed sway back and forth when pushing and pulling on the strapped down SUP. I’m confident both craft will be held securely for any duration we intend to drive. Since the 2020 Toyota Tacoma with the 5 ft. bed is somewhat limited on bed space it was important for us to have a set up that would allow us to maximize our truck bed use. With the BedRock HD and LongArm combo we are able to accomplish our goal. There is 19” of clearance between the floor of the truck bed and the bottom of the HD crossbar with pad installed. Without a pad on the crossbar there is 20” of clearance. Plenty of room for our gear totes and cooler. For those interested, I installed the forward-most crossbar/tower assemblies 17.75 inches rearward of the front outside corners of the bed. The rearward-most crossbar/tower assemblies are installed 14.25 inches forward of the rear outside corners of the bed (excluding the top of the tailgate). That gave me a center to center crossbar spread of 28”. The LongArm Extension is bolted with the tee bar at its shortest configuration, and the entire assembly is bolted one hole placement from the vertical position. [See attached photos]

Best online company I've ever dealt with. Website and follow-up outstanding. Great customer service.

Everything fit perfectly and look forward to purchasing future accessories.

Very strong and safe for my intended application.