Best Ford F-350 Super Duty 5th Wheel Gooseneck Adapters

Great product and great customer service. Only reason for a 4 star review instead of a 5 star review is that i really didn’t like the large footprint that it took up in my short bed truck. Traveled 2157 miles this year pulling our 33’ Grand Design and it was flawless. Sold our truck recently and up graded to a duramax with a puck system so we also upgraded to a B&W RVK3710. Haven’t pulled with it yet but I am expecting the same flawless operation as the last one. The build quality is extremely rugged and I love the small footprint.

Hitch is as expected. B&W's reputation precedes itself as the best of the best. Also, I now have a higher opinion of this company. The first shipment came with damage like it had been previously installed and was missing parts. Samantha with etrailer was quick to get it completely replaced. Obviously it should have come right the first time, but I am still impressed with how easy she made it for me by having the damaged unit picked up and a new one delivered in time for our trip.

Superior design. Superb build quality! The B&W Companion slider ticks all the right boxes for me! The instructions are well written with helpful diagrams that make them easy to follow.

I purchased the B&W 20K Companion Slider & Underbed Mount System (UMS) for my 2015 Ford F150 extended cab (with 6 foot bed) over a year ago because it was the only solution that was removable. Construction and finish was very nice and still looks great. Installation wasn't too difficult but the 4” hole in the bed needs to be exact otherwise getting it square will be very difficult. Overall the slider works great but must be mounted directly on the bed and cannot be mounted over a plastic bed liner. Once installed everything worked great however after numerous trips I've yet to need or use the slider backing up as I can turn 80+ degrees without ever hitting or coming close to the truck cab (towing 2018 Cougar Half Ton Series 5th wheel). Also the slider is very heavy (head 75 lbs + base 207 lbs = 282 lbs) to remove and install (takes two people or an overhead winch). Plus the overall hitch weight (head, base & UMS is 394 lbs) puts me very close to the GVWR once the truck & trailer is fully loaded hence in hindsight I probably should have gone with the fixed 5th wheel hitch (total just 318 lbs compared to 400 lbs) instead as it would have saved 81 lbs and costs $489 less but at least I have the option to slide it back if ever needed.

Not As Advertised and Horrible Customer Service at Reese! The pinbox came without installation hardware or directions. The hardware took a month to replace and again came without directions. The pinbox DOES NOT have the air valve as pictured. When I called Reese I was told it was due to a parts shortage and the person I spoke to told (Paul) me the new set-up was a dumb design. I TOTALLY AGEE!! To inflate one person has to literally crawl under the pinbox while hitched to inflate while another watches the bar. Not easy for a 60+ year old fat man! The valve faces OPPOSITE the bar side. Just dumb. When etrailer followed up they were basically told I have to live with it. NO - NOT HAPPY!

My camper is 4 yrs old. I was using a gooseneck offset adapter to hitch fifth wheel to truck B&W gooseneck hitch. I upgraded to the Reese 16k Goosebox with a recommendation from a friend. I am absolutely impressed by how this hitch tows. No more chucking, the airbag and shocks add a much needed level of comfort. My camper is a Starcrart AR-One Maxx 26BHS. I’m towing with a 2005 Ram 3500 4x4 CCSB. I am using the B&W offset hitch ball to create more space between the truck cab and camper bulkhead. Highly recommend this hitch to anyone looking to tow their 5’er with a gooseneck ball hitch.

I got a email to review this so here I am. The attachment to the bed in fantastic. I rate it at 5 stars and an it’s very easy to remove quickly. The king pin lock does not work very well after about 6 months of use. I typically have to reach into the locking mechanism to get it to release properly. Other than that is has not cracked, rusted or bent since I’ve owned it. I live is the high desert so it does not see much rain or snow.

Good hitch. Easy to set up on my gooseneck ball. Connects and disconnects easily. It is a little hefty so I use my tractor to move it around when needed.

Hitch is great, B&W products are exceptional. Had the turnover ball mounted on a Douglass flatbed. Purchased the fifth wheel hitch for a 37 ft two axle toy hauler. Pulls great, easy installation. Make sure to make all the appropriate measurements before purchasing. There were some shipping issues. etrailer failed to send a bolt bag initially. Took a while to get that rectified, but all is well.

Used the Companion hitch to convert gooseneck ball mount to 5th wheel hitch. Companion fits perfectly inside the well of my flatbed and is easy to remove to use the gooseneck ball and easy to re-install. The hitch is very secure and tows my RV quite smoothly. There is no back and forth movement and I couldn’t be happier with it. Easy to hook up and disconnect the trailer. Highly recommended. Etrailer staff was very helpful in helping me find the right equipment to meet my needs.

YOU put out a product with false pretense on how to mount the hitch because it requires drilling holes and also bolting it directly to the factory fith wheel hitch. this would be imposible for some one in a trailer park. and probly need costly assistance from a machine shop for most. Fortunatly i am a machinist

Easy installation and so far a quality product works well and handles the camper without any weird deflection

The assembly seems very stout and sturdy overall. Was able to put the unit together in truck bed quite easily. will know more in upcoming weekend when fifth wheel trailer gets pulled home

This hitch has performed its duty for us just fine. Light enough for an a younger person to put in and out of the truck easy enough. Like the fact that I can use a goose ball but still maintain the factory pin box on the camper. This set up in my 2024 6’ 9” bed duramax with our camper is capable of a 90 degree turn on flat ground, not that I take it that far often but it can go in the event I need to. In the event of a mechanical failure on the truck I have plenty of friends with traditional 5th wheel hitch set ups to help us get home. One thing I will note is that going by the factory directions of 30lb. Ft. On the retaining bolt allowed the plate to rotate about 1/4” in transit I now tighten it to 40 and it hasn’t moved since. Overall I’d buy this set up again. Works with my factory gooseneck prep package. I’m running a Reese 2 5/16” ball no problems!

My trailer hauls amazing. No lurching, stops are smooth, looks amazing and no ugly receiver. I did receive this hitch with the locking pin installed 180 degrees off. So it would not lower on to my ball. I quickly removed it and rotated it so that the slot was facing appropriately. I don’t think this is a reason to rate this anything less than a 5 star. Happy customer and will always use them!

Great pin box. Arrived in pristine shape. Easy to install and works great.

Other than it not being tight fit to the bed of truck and rocking a little it works well. Wish it had a better fit in the bed.

I just received the adapter plate, and it appears to be correct, and also appears to be well made. We will know how it fits once we attempt to mount it. The box it was shipped in looked like it had been chewed up and spit out, but since the item is all steel there was no damage.

This product is a chucking ENHANCER, not a chucking dampener. Additionally, despite what you have read, my experience with GenY customer service has been terrible. GenY will not support their warranty program, they will try to tell you everything is OK, when the fact is, their product is faulty and does not function to GenY product literature statements “Built-In Suspension Creates Up to 90% Smoother Ride”. I purchased the GenY executive hitch from eTrailer on 3/10/23, etrailer sent the wrong unit and to etrailer’s credit - they quickly took responsibility and replaced with the correct unit on 3/24/23. I installed on my DRV Elite Suites PS3 just in time to attend the SOITC rally at the Outer Banks on 4/13/23. When we left for this 750-mile one-way trip, the GenY load indicator was in the middle of the green zone, I measured the pin load at 5,200 pounds. Bedrail clearance was my reason for buying the GenY, it replaced a Trail Air on my DRV and a Reese 27,000-pound hitch on my 2022 F450. Bottom line, the GenY system provided no improvement in bedrail clearance, but did offer the ability to switch in different gooseneck balls to adjust for bedrail clearance. GenY states that a 1,000-mile break in period is required before the GenY torsion system is fully effective. My experience was that at 750 miles the torsion system on the GenY had sagged to it lowest point with the load indicator in the unit outside of the green, this also resulted in losing nearly two inches of bedrail clearance. It looks like it has a metal-to-metal stop so that the lowest the indicator will go is to the white lines outside of the green. I called GenY from the RV park and was told that the unit would not sag further. I purchased a Curt gooseneck ball which was 2 inches higher than the Ford ball to regain bedrail clearance having to rapid ship it to the RV park. Chucking became downright scary on the 750-trip home. As an example, chucking was induced every time my truck’s ten-speed transmission shifted up. Upon arrival home, I again contacted GenY customer service with a full expectation that GenY would replace the unit. Instead, here is their response: “I spoke with our QC Manager regarding your hitch. He said that you are in the correct unit and being at the top end of the green is normal after the break-in miles. As for the bedrail clearance he said that you would be able to lower the pin box down a set of bolts (with our pin boxes you are only required a minimum of 4 grade eight bolts per side) or use a B&W ball as they are roughly 1 1/2” taller.” This is unacceptable...

So far this hitch has been wonderful. We were fortunate enough that one of the hitch reviews on YouTube was on a DRV fifth wheel similar to ours and so we ended up going with the exact same hitch. The sample mathematical equation used to figure out what size hitch one would need, just didn’t work for us. It was trying to get us into a heavier duty hitch than what was needed. My advise? Gain knowledge of your actual pin weight and then buy accordingly. It’s a five star product!

Shipping on this item was quick and packaged extremely well. The GenY hitch exceeded our expectations. We just completed a 600 mile trip. In the first 100 miles we noticed some stiffness, but after that it loosened up and on the return home we definitely noticed a difference. The hitch is very easy to hook up and as long as you are within a few inches the hitch will center itself and slide onto the ball. We towed with an F350 6 3/4 foot bed and I do not see any need for the 4 inch extension ball setup. A subcompact tractor makes 1 person install of the hitch a complete breeze. The angle is perfect. I ordered the GenY chains and mounting bolts and all worked very well.

This hitch reduced chucking very well, I have a 2004 3500 Dodge Ram 4x4 Conestoga riding truck with very stiff suspension, the torsion action of the hitch definitely helps when crossing bridges and pot holes. The 5th wheel is an older Keystone Copper Canyon that is in great shape. I Have 12K miles with the new hitch.

I have had great success with this converter. Easy to install, I love the remote release cable. Ride is comfortable. Did not disappoint whatsoever.

Order confirmation was fast, shipping was fast, they said it would be here Saturday but ups doesn’t deliver on Saturday or Sunday so it didn’t get here until Monday. I knew this so I was expecting it and I didn’t need it right away so to me it didn’t matter. Everything was delivered in good shape when it got here. I’ve bought one of these from strainer before and liked it so when I found I was in need of a goose neck adapter again I got the same one and etrailer came through again. This adapter is expensive but it works great. Would recommend.

The Gen-Y hitch is very stout & well built. Fit & finish was excellent. Installed myself in about 30 minutes.

The Gen-Y gooseneck has been excellent! I now have approximately 12k miles on mine and it rides very nicely with very limited chucking and handles rough roads very well. I’d highly recommend that you contact Gen-Y BEFORE ordering to ensure you get the correct load rating product. Gen-Y and Etrailer have provided excellent customer and tech support! This product definitely frees up your truck bed and does require a precise line up to hitch.

I have a 2019 f250 with the 6.5' bed and didn't want a heavy, bulky fifth wheel hitch taking all the bed space up. I had the fifth wheel package already installed as well, so it didn't make sense to not use that. I about went with the ultimate hitch that Anderson offers but decided against that as I have seen many reviews where the hitch failed. I saved a bunch of cash going with this product and it is awesome. I installed it by myself in my drive way in about 2 hours start to finish. I have zero issues turning so close to a 90*. I have a headache rack on my truck and it gets within an inch or two of hitting that but not my truck. I don't have any issues with the king box hitting the bed either like some people stated. The test ride today went very well. It rode very smooth and I have plenty of bed space for my dogs and gear. I would highly suggest this product if you are on the fence like I was. I will see how this will hold up over the years but I doubt I will have any issues. The shipping effected the sheath covering over the cable, I contacted the company, sent some pictures and they will be sending me a brand new part. I love this company and the products they stand behind!!!

I have been using the Ranch Hitch #3100 Straight Adapter for 3 years. Converting the 5th wheel to goose neck was awesome. Much easier to hook up and a smoother, quieter pull. After purchasing a new trailer I noticed that the trailer was too close to the cab of my short bed truck. I found the Ranch Hitch #3139 with 8" offset adapter. It installs easy and gives me 8 more inches away from my truck cab. Excellent! Turning corners is much more comfortable!

This may be a compatibility issue between manufacturers, but why is the front of the hitch pin plate not centered with the trailer center

I like this a whole lot better than the gooseneck. hooking up is faster and easier. no trying to guess if youre over the ball or not, just back into it until the jaws latch.., I will be putting this on all my goosenecks. love it! Not to mention it took the chucking out..

I ordered the Bulldog adapter because I believe their quality is good. The construction of the Bulldog hitch adapter was good. However, the 4” tube was not perfectly round, approximately.030 out of round. This shouldn’t have been an issue, but since my trailer is used and had a Temco hitch originally, the tube wouldn’t slip in. I chucked the Bulldog in the lathe and skimmed .030 of the diameter and it went right in. This review is not written to criticize Etrailer or Bulldog. Just be aware if you’re working with a different brand hitch other than what is listed, there is a possibility of fitment issues.

Ordered on Friday afternoon and received the following Tuesday. Very simple installation. No longer have to crank the gooseneck up or down to connect to truck. Very satisfied with this product and the price was very reasonable.

Huge difference in not only allowing me to utilize my truck bed once I’ve unhooked my fifth wheel, but I feel the ride is improved. Great company in helping me complete this changeover

Installation was a breeze. I have not towed with it yet, but am sure it will perform as expected.

I ordered this product and received it 3 days later, I took about 1 hour to remove the gooseneck tube and install this one and get the height set for towing, removed it once again and painted it due to it being bare metal. So far this seems to be a quality product.

Great product, fast shipping, excellent communication, definitely recommend these guys!! We painted the square tube/king pin tube red and installed it. Works great, but there is not much of it to see in the pic. Take my word, well built & very heavy duty!!

I like this set up because I can use the goose neck set up when needed a d install the 5th wheel when I need to pull my rv trailer. Easy to change from one to the other

This product fits my fifth wheel hitch well and fits in the truck hitch as well. Have not pulled with it yet as winter storms are here. I expect it to work well. Expensive for as simple as it is. Hoping it is built well. Nice That I was able to get a used one at a reduced rate. Missing the pads so we’ll see what kind of a difference that makes. Very happy with etrailer as a distributor. They make the purchase easy and quick free delivery. They Always follow up on my satisfaction with my purchase’s.

Excellent quality very well made fast delivery Would buy again

Would bot fit onto my big tex trailer!