# 1
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
The drivers rear didn't get built correctly. the hole to put the tie done is missing. I had to drill a hole into the tie down so I could use it. Didn't notice the problem until I went to put the camper on my pickup. The other three are fine.
Forklift tie downs are manufactured to exact fit to existing manufactured frame rail holes. They lined up perfectly and after 6000 miles with camper on board have stayed secure. The only downside, (this is relative to when and ware you use you camper) they will corrode when driving through snow covered roads that have been treated with sand and/or salt. I use an oil based product to protect them corroding.
# 2
Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Qty 4
I used these to mount a vintage 1970 Avion C-11 to a 1993 D250. They worked great and were much stronger than I expected - and it was a huge cost savings (and a much more attractive look) than some of the frame mounted options of more than $1000. There were some oddities that I noticed. It was impossible to mount them exactly the way the instructions suggested because of where on the wings near the cab,. The brackets also could not stay on with the camper unloaded because they would hit the jack mounts, meaning they had to me bolted in after the camper was in the truck but before lowering the jacks, making the access to the bolts a frustrating 'feel for it' experience.I'f suggest the manufacturer secure the bolt so that you don't need to hold both sides when tightening/loosening, and also refine it to need less turns to do so. It took me 2 hours to mount the first time, and not much less when removing them with the limited access. The pads also came off in the first use. I gave it a 5 star because I realize there are limited options for older campers and anything universal is going to have issues with some thing - so that's just my input and experience. Overall pretty reasonable for the price and functionality.
The product was shipped extremely quickly, it arrived 3 days after I ordered them. As far as the product goes I was extremely pleased that they were as easy to install as the product video showed them to be. I had been looking for a tie down system that would work for my 2018 Ford since I purchased my camper in 2020 and after much research I found these at etrailer. One word of advice is that if your camper has a shower or other design that allows the camper to extend across the bed behind the wheel wells, either move the rear tie downs forward or shorten the leveling stud before you attempt to load your camper. On mine it turned out that once the tie downs were placed and attached I had to cut off about 3 inches of the threads. Other than that it was an easy install although the bolts that attach the tie downs to the under lip clamp are a challenge to install but take your time and they will go on. I will post an update once I have been on the road for a few trip and see how they are working. Thank you etrailer for your super fast shipping and online product videos.
# 3
Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4
Used these on my 2012 Tundra Crew max Had to put in more effort in the installation then the instruction tell or show. for example the truck pockets where these slide into I had too cut the plastic that was covering the holes, I removed the tail light on one side to get the top bolt screwed in. I had to remove the gas cap and plastic to secure the top bold. I also added bigger washers cause there are existing hole that hold the factory plastic so the nut couldn't slide out and away. Other then that these mount work great
Not compatible with 99 Ford F-150, even though the description said it was. Stake pockets are double walled on this truck. Bolts too short. Very frustrating.
# 4
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
Awesome help with order and expedited shipping.
Tie downs fit my truck perfectly. Easy to mount the camper on the truck by myself. Not cheap but worth every penny!
# 5
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
I ordered the TorkLift Rear frame mount tie downs for our Ford f 350 so we could secure our Lance truck camper to our truck, E-Trailer was great my tie downs arrived two days earlier then expected so I opened the box and checked everything over just to make sure everything was in great shape and everything was so I decided to put them on and it only took me five to ten minutes for both .These tie downs make it very easy to secure our Lance truck camper to our truck and also make it very safe to travel on the highways and back roads
I am glad I called in, because I would have ordered the wrong part. Thank You Jaime B for your help. Still not 100% sure this is the right part; I will find out this weekend when I install it. But I do have confidence that it is the right part. :)
# 6
Brophy Slide In Camper Tie-Downs - Extra Clearance - No Drill Bed Mount - Qty 4
The Brophy tie-downs work just as advertised. I am a recreational user of my camper - not full-time or long trips, and have had no issues with them. The only challenge is backing my truck under the camper with the brackets mounted - like threading a needle, because the leg stands barely clear the brackets. I have a 2-16 F-250 and a Northstar 650 and their is not enough clearance in the bed to add the brackets after the camper is in position. Again, this is not a problem with the brackets, its a camper leg/stand and bed width issue.
Easy to put on they work perfectly very solid I have a 20-22 palomino SS 1251 truck camper Badland Edition doing a great job thank you a bunch
# 7
HappiJac Camper Tie-Downs - Custom Bed and Bumper Mount - Front and Rear
The bolt holes were not lined up It's sitting in the corner of my storage garage never to be used
Exceptional quality. etrailer is the first vendor I go to when I need a high quality product
# 8
HappiJac Camper Tie-Downs - Custom Bed and Bumper Mount - Front and Rear
First of all, etrailer was amazingly communicative in the delivery process, which was greatly appreciated. And these tie downs were such a straight-forward installation. Start to finish, I would 100% buy from etrailer again! Highly recommend.
The tie down kit is very high quality, and the installation instructions were spot on. Our truck is in mint condition and I wanted a tie down system that was low profile, and did not take away from the looks of the truck when camper not on it. I've not used the turnbuckles yet, but they are set up ready for work and look great.
# 9
HappiJac Camper Tie-Downs - Custom Bed and Bumper Mount - Front and Rear
Good product. I would not recommend for large campers with stock rear bumper, the bumper will get bent. I have an aftermarket steel bumper and this makes for a good secure mounting system for the rear mounts. The front mounts on my 2022 Ram 3500 crew cab were very difficult to slide up into position, absolutely a two person job, but also very tight fit causing some hidden paint damage. Overall a good product, I like it's discrete mounts that stay on the truck between uses.
works as it should and when not in use it is out of the way
# 10
TorkLift Talon Camper Tie-Downs - Custom Frame Mount - Aluminum - Rear
The Talons and the fast guns are awesome products, fit and installation was very easy. The products have held up very well and will for a long time. The extra money spent for this set up was very worth it. It takes no time at all to secure the camper down and the fast guns have never needed adjustment after initial set up. ETRAILER was great to work with and followed up after sale. Products shipped quick and were in stock. They also had lots of information posted on YouTube to ease installation. Great company, great products by Torklift!
Installed on a 2016 RAM 3500. No issues. These installed very easily but you'll probably want to use an air-impact gun to get the hitch/bumper bolts loosened.
# 11
Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Zinc Plated Steel - Qty 4
Quick delivery and my box was in good shape:)
# 12
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
The hardest part of the installation was removing the frame bolts from the truck that are reused. The instructions were clear and easy to follow, and each piece fit perfectly where it was supposed to go. You don't need to be a mechanic to get these installed, but the proper tools are a must, along with a good chunk of an afternoon.
All parts arrived in good condition. The Torklift part you recommended was the exact fit, installation went well.
# 13
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
Steve Z at etrailer was sharp and very knowledgeable on the companies product. Steve was able to work with me on getting the proper camper tie downs for my 2015 Dodge Ram 1500 (Item #TLD3107). He told me when they would be arriving and they actually arrived earlier than expected. Great product, install was pretty easy, I had them installed within an hour. This is a very high quality product with heavy duty construction. They provide a secure attachment for tie downs to the truck camper. The instructions provided are adequate, but not great. I Don't normally give recommendations or endorse products, but these I am truly impressed with. Thank you so much Steve and etrailer.
Ram 1500 install, make sure to remove any burrs inside round end before inserting the crimped end of the receiver. One side was really tight and I couldn’t get it back out to remove the burrs. Used a steel clamp to get it to go in far enough. No fun.
# 14
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
The product works perfectly!!
# 15
HappiJac Camper Tie-Downs - Custom Bed and Bumper Mount - Front and Rear
I am extremely happy with this setup. Installation *could* be done by a single person, but would involve A LOT of figuring out special approaches to holding things in place for alignment and tightening. But I had a friend help me and installation went about as perfectly as one would hope for. I have used the oriduct for multiple trips, sone of which were on washboard gravel and dirt roads, and the setup has worked perfectly. My truck camper is a popup and pretty light, and the setup holds the camper in the truck very nicely. I suspect it would work very well even for heavier and larger truck campers, as well. I called support before ordering and was provided with perfect information in a very professional and caring manner. I am 100% satisfied, and highly recommend both this product and etrailer as a company.
I use this in A 2007 Silverado 1500 Classic with a 6.5-foot 1996 Lite Craft. Works great, and it was easy to install.
# 16
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
3500 Mega Cab (short bed) 6.7 Turbo Ram & 2018 855s Lance. Needed to build a frame so side to side movement was minimized. The camper will sill walk back an inch or two but have a solution for that also. Torklift equipment is top notch and built to last. Works great!
I added a Super Hitch to my truck so I had to replace the rear tie downs. Two bolts on each unit and easy to reach. Very well made and heavier than the torklift that were attached to the Ram hitch.
# 17
Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Qty 4
At the moment I have yet to install the tie-downs. However they arrives when etrailer stated and the boxes were in excellent condition. I expect to use them this weekend to pick up my new to me slide in truck camper.
Delivery came early and the box had all the parts . I still have to install the tie downs but seem pretty straightforward process
# 18
HappiJac Camper Tie-Downs - Custom Bed and Bumper Mount - Front and Rear
Very satisfied with customer service! And purchase. The sales staff know their products very well. We had a Blip with my delivery but again the staff Rose to the Occasion. Thank you, great doing business with you !
# 19
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
I bought both the front and rear tie-downs for my old Lance truck camper on a 2023 Ford F-250. Once installed they work great; very heavy duty. But the thing I liked most was the detailed instructions for installation. Everything needed came with the tie-downs and they were perfectly fitted to my F-250. All I needed was my old torque wrench. Installation probably took less than 2 hours.
The package arrived very quickly and intact. I have a 2020 Ford F250 SD Lariat short bed with a factory hitch. The tie-downs were really easy to install although the hitch adapter plate (see attached photo) which is supposed to attach to the end of the tie-down would not fit inside the tubing on my factory installed hitch so I installed without it and it is tight and snug
# 20
TorkLift Talon Camper Tie-Downs - Custom Frame Mount - Aluminum - Rear
They worked great
Torklift makes the best truck camper accessories period! Best value for the best price.
What our customers are saying:
"Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast."