Summer Starts Here - Save up to 70%
# 1
Nylon Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long
Excellent service and quick delivery and great price, all looks good, thanks for helping me out with these items that I can't find around my area anymore,AES
Bushings quiet the trailer for a short period of time. Bushings wear out and squeaks return quicker than I expected.
# 2
Replacement U-Bolt w/Nuts for 7,500-lb, Round Trailer Axles - 9/16" Diameter
I had a hard time finding a u-bolt that would fit my vintage trailer. These were the perfect width but too long. I cut them to size and they fit perfectly. These were the only u-bolts I could find that would fit my leaf springs. They are good quality and have held up nicely. I just wish they made this size shorter.
Loved the updates on my order!
# 3
Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
The wet bolts were just fine. But the "locking nuts" with the crimped edges were aweful. The 3 dimples each nut has were not useful. Many of the nuts I could use my fingers to spin them on the bolts. Never had locking pressure. I ended up going to local hardware store for much better locking nuts.
I bought a set of these bolts to replace the hardware in the triple axle suspension of my toyhauler. I had read about the benefits of a wet bolt kit, and after finding two broken shackle plates on my camper, decided I too needed to be able to properly lubricate the moving parts. These were a perfect fit and replacement for my original bolts. At the time I installed them I hadn't read about orienting the hole in the bolt to the 3 or 9 o'clock to ease pumping grease through them. I put them in at whatever orientation they were in my hand, but had no problem pushing 3 - 4 pumps of chassis grease through the zerk. I was able to observe grease flow out of the spring eyes around every bolt, and all of the zerk fittings stayed firmly in place when I wrestled the grease gun nozzle on and off. There were a few bad reviews about these press on fittings falling out, but I didn't see any evidence of that. I am very pleased with this purchase, and enjoy the peace of mind that comes with knowing I can properly service my suspension and hopefully extend the life of all the components in the system.
# 4
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
Bought this to replace the shackle links and hardware for an existing aluminum trailer, did not use the brackets. Bolt shafts are "flared" on the inside head end so you need a press to push them into the bracket. Otherwise, you need to crank down the nuts as you install them to seat the bolts properly.
Good kit with the necessary parts to replace leaf spring suspension. I welded the hangers rather than bolting them. The parts are not coated for the price point so you will need to paint them or they will rust immediately.
# 5
Nylon Bushing - 9/16" Inner Diameter, 7/8" Outer Diameter - 1-3/4" Long - Qty 1
Good product. Unfortunately theses where not the correct size I needed.
The right parts delivered quickly. Thx
# 6
Rear Hanger with Bushing for Single Axle Trailer Suspensions with 1-3/4" Double Eye Springs
I think etrailer is Great. I think their customer service is fantastic. My wife and I were in Arkansas, 1200 miles from our home in Ft. Myers Florida. I replaced the original springs on our trailer with new heavy duty springs, but never changed the hangers or bolts. Our trailer was riding very poorly, we needed new hangers and bolts badly because we were headed on a very long 9000-mile trip with many stops all the way to the Monterey CA. etrailer found us a UPS Store along our route to send us the parts that we needed. Many thanks to etrailer for great parts and Fantastic customer service and for helping us with our most Wonderful Adventure!
Product was as advertised and work perfectly. I like your company and have purchased many items from you. The shipping was very good and arrived shortly after the purchase.
# 7
Front/Rear Hanger for Double-Eye Springs - 1-5/16" Tall - 9/16" Bolt Hole
Not bent enough. Open end measures over 2”. Not a huge deal but would be nice to have them closer to what they need to be before welding. I will have to tighten them up before full weld.
Just as good as the ones from the big box stores but way cheaper.
# 8
Well, my suspension replacement and over/under swap went great! You guys were very helpful in ensuring I got the right parts and didn't waste money on shipping and other parts I didn't need. It tows like a dream now. I hardly even notice it behind me and I really don't have to slow down to .05 MPH for every little dip in the road.
good product
# 9
We had a broken balancer on the right side of our 5th wheel. The right side had one shackle wore through and a couple others not in good shape. We changed out both sides in short order we could ever level the whole works. The parts were exactly what we wanted and came by post sooner than even expected. Very happy with the whole process!!!
Shackle Strap fit and works as expected. I'll know more about it durability after running it for a few years.
What our customers are saying:
"Thank you! I enjoyed shopping your site."