# 1
Curt 2 Bike Platform Rack - 1-1/4" and 2" Hitches - Frame Mount - Tilting
I installed this rack onto a Curt trailer hitch which is mounted onto a 2017 Honda Fit. I have been using it intermittently for several months, probably about 5 times with one bike and twice with two bikes. I give some pros and cons below and then elaborate. Pros: easy to assemble, easy to mount and dismount bikes, easy to lock and unlock, how to put the rack into different positions is intuitive Cons: inconvenient to put the rack into different positions, inconvenient to mount the rack onto the hitch, rack protrudes about 15 inches from bumper when in flipped up position (seems very vulnerable to someone backing into it in a parking lot, very inelegant looking I say the repositioning is intuitive because there is really only one way you could possibly place the pins for each position. But removing and replacing two pins is much less convenient than turning a knob or a lever, like some racks do. Also many racks fold and flip in such a way as to look very unobtrusive when in non-use mode. This one looks like kind of a monstrosity. That does not really bother me but it might bother some owners. The part that does bother me is how far it protrudes from the car. I back into parking spaces whenever possible to avoid someone bumping into the rack and damaging it (which happened to a friend). My number one suggestion for Curt is related to mounting the rack onto the hitch. Make it easier to tell when the holes are lined up so that the bolt/pin will fit and thread. As it is now, if you insert the rack as far as it can go it is way too far in. Ideally, it would be exactly lined up. Failing that, maybe some kind of click or other feedback to know at least that you are in the neighborhood. It would also be great to have an attaching device that is easier to fasten and unfasten than is the bolt/pin. Tip for mounting the rack onto the hitch: I assumed that it would be awkward to hold, what is it 46 pounds?, while trying to line up the rack probe with the receiver. If you have a garage with exposed collar ties, my solution could work well for you. I looped a cargo strap over a collar tie. Then I hooked both hooks of a bungie onto that loop. The idea is that you hook one of the bike frame holders of the rack onto the bungie, suspending the rack a few inches off the garage floor. This takes most of the weight of the rack so that you can just pull up or down and forward until you line up with the receiver. Tip for mounting bikes. Don't put the little screw into the post that prevents you from completely removing the bike frame holders. Remove both holders. Position the first bike, slide the holder into place, position the second bike, slide the holder into place. I found this makes it much easier, because you avoid parts of the bike hitting the holder as you are trying to get the wheels into place. The trick is that if you are mounting only one bike, don't forget to put the second holder back on - or maybe just stick it inside the car right away.
Have used mine several times in the past 2 years on the back of a ‘21 Honda Pilot and a ‘19 Ram 1500 Classic. I really like that the platform will tilt downward allowing the Pilot rear hatch to open with no interference. The tailgate on the Ram doesnt open fully even with the platform tilted downward, but that is a Ram problem & not a Curt problem. Was well worth the money.
# 2
Curt 4 Bike Platform Rack - 2" Hitches - Frame Mount - Tilting
Besides taking too long to get since being ordered in July, it is a great Curt 4 bike product......Installed it today and it works great. Curt products are made from a strong quality! My Curt hitch was installed over the Summer, ordered from etrailer and it works great also...Very happy of the outcome. Thanks.....
Great bike rack and outstanding customer service. Easy installation, sturdy bike rack and when I encountered a defective support arm, customer service had a replacement part shipped to me in less than one week. Great value and great support. You cannot get better than that.
# 3
Malone Hanger Trunk Bike Rack for 3 Bikes - Adjustable Arms
I just received my bike rack and I opened the box and was pleasantly surprised with the rack. I live in the Northeast and it is not biking weather and I did not place it on my car, but I love it and it is quality made and have no doubt it will fit my car and I will love it.
Good to great product. Is easy to secure to the back of my 2012 Mazda 5 station wagon. Mounting 3 adult sized bikes took some practice to navigate through hinged braces especially with a bike that had an unconventional frame. Requires some bungee cord traction to keep front wheels from flailing around but that is probably an issue with all bike racks?
# 4
Kuat Transfer V2 Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount
Assembly was a little bit of effort and needed some space to get it done. It’s also a bit heavier than I expected. But the features are fantastic and it feels like a bike rack that’s going to last. Very well designed.
I wish it came with a written set if assembly instructions to a very easy way to fine the assembly instructions using the website. Other that that the product is easy to assemble and seems to be well built. I have not yet used the bike rack so I have no use review yet.
# 5
Kuat Transfer V2 Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Wheel Mount
I've had a couple of hitch mount bike carriers in the past but they were hanging carriers. I am no fan of those especially with the geometry that doesn't allow for the bike to sit straight. The Kuat Transfer rack was a huge upgrade for me. Loading and unloading bikes is easy. Bikes are very secure on the rack as well. I like the pedal for lifting and lowering but you will need to use your hand instead of your foot depending on the position. I was recently sent a recall notice for the rack where the pedal/lever can cause the rack to release. There's a kit that you can put on or you can have it put on by a professional. They will send you the kit and strap (that you can use temporarily until you get the kit installed). I have the kit but not have installed it yet but from what I can tell, it has another small lever that you'll need to push out of the way as you press on the larger lever. I don't expect the function of the rack to be any different. I use the bike rack every week. I have never had an issue with it and am very satisfied. It does what it's supposed to while tucking away while not in use. I would buy it again.
Works great, no issues.
# 6
Yakima OnRamp Bike Rack for 2 Electric Bikes - 1-1/4" Hitches - Frame Mount
We love this rack. Both my wife and I use it all the time. I can mount and remove it in less than 5 minutes. I often transport 2 substantial ebikes. When we ride together, either of us is able to load and unload both of our bikes in less than 8 minutes. This is a solid rack and the price was definitely right. And when not in use it folds up neatly behind the bumper.
Excellent bike rack. I had a very small issue trying to hook up the hitch part, but all went well. Also, I received excellent customer service from Sara. She was very helpful and extremely friendly. It was a pleasure receiving great customer service from Sara.
What our customers are saying:
"Just to let you know I was very satisfied with my orders for a hitch, wiring harness, bike rack and extension. I have a 1995 Dodge Ram van and some of the parts are hard to get elsewhere. I received all my orders proptly and will recommend you to others. The pricing can't be beat. Thank you. Sincerely, Frank"