Most Popular Brackets for 2021 Ford F-150

The product itself is great, but the hardware (screws, nuts, etc) is trash. Should be stainless steel. Keep in mind, it doesn't include hardware to fasten to the frame of your vehicle. I used the hardware from another kit here on etrailer. I initially ordered the incorrect bracket. I had it installed for literally one week. No snow or ice, and it looks like I dropped the thing in the ocean for a month.

Gotta have this bracket to mount your 7 pole connector to. But I had a place to attach to on my Draw-Tite hitch and didn't need the self tapping screws, HOWEVER, I needed two additional black screws to attach the connector bracket to the hitch spot. Should come with (6) black screws and two self tappers. I have to go find two additional black screws if able to attach the bracket to the hitch hangar. That's why i didn't give it five stars.

hitch installation video was helpful... bolt clearances on the passenger side above the muffler were very tight the space saver spare barely clears the hitch. The wiring harness 7 pin mounting only bolts to the plastic valance. There is no room for any other type of mounting.

Thanks for the great video on installing the 7 pin adapter (ETBC7L). The video was even on a Toyota Grand Highlander - my exact vehicle. I didn't like how low the video installed the bracket, so I made a few bends to this bracket to integrate it more into the the lower molding. This raised it up another inch or so compared to your video. You can see the height difference in the screen grabs of your install versus mine. Bottom line, you can use this bracket to fabricate for you unique situation.

Fits perfectly. Uses the existing bracket mount on the hitch (Sprinter passenger van version)

Nice piece but I am now aware that this bracket wasn't compatible with the 7-way kit I installed. I made it work by drilling more holes but be aware, not all brackets work with all 7-way plugs.

Good product, easy installation, manual showings step by step,

Worked out perfect for my 2024 Kia Sorento Prestige, I could not find a harness that would directly plug into the factory tow harness. My only complaint was the length of wire to plug into the passenger taillight was about six inches too short.

I was able to call and ask some questions about my item fit. item arrived fast and is what we needed thank you

The costom bracket kit is of heavy steel,powder coated for protection, from your video it is going to be a lot easier to install and save time,alot less drilling and mounting of components, I am very satisfied with this product and cannot wait to install it on my 2013 Ford f150,will be pulling a 25 foot 5th wheel camper, thanks trailer for a great product

Direct fit. Time will tell on the longevity of the spacers but will control the noise a bit. I understand friction is needed but the solution of using grease at the touchpoints as an alternative still has reduced friction. My RV is max 6k, I have the 10k capable hitch setup and will report back any cocnerns. Right now all is good. E trailer, thank you for the quick turnaround on the order.

Just installed them but have not tried them out yet., Excellent transaction. I always go to etrailer for my RV needs.

I welded it to the curt ball mount after aligning it with the ball mount. Very strong!

I bought this damper mount because it was all set and I didn't have to do anything except bolt it on to my hitch bar. It was very simple just follow the direction provided. Remove the ball then position the damper mount and reinstall the ball. The quality of the part was excellent and everything worked as expected.

My package didn’t come with the mounting screws but I still got it mounted securely using two self-tapping screws I had available. I drilled them into the plastic surround near the vehicle bumper, and it worked just fine

I purchased this item with my trailer hitch. This product is very sturdy, easy to install and made of good strong material. My 4-way plug fits perfectly and is held tightly by the bracket, also it came with bolts and nuts to secure bracket to the hitch.

After getting the hitch aligned in the box, the mounting braket bolted right in. It was very easy with the tool that was provided.

The box is suspect at best and the hardware bag was ripped open. I was pleased to see everything was accounted for. Instructions are great and installation a breeze. I was especially happy they do not interfere with Airlift's load lifter 5000.