Summer Starts Here - Save up to 70%
# 1
Dexter Trailer Springs Over-Under Conversion Kit
Great kit! Installed this on my 1995 Jayco Fifth Wheel and it really improved the ride height with my truck. It’s been on 2 round trips from Texas to Montana since and many other trips locally with no issues.
Our trailer was so low...that it could not make it up a low curb and some driveways - especially when fully loaded. Went with the Dexter axle flip kit. The Dexter bracket and base plate pieces are worth the extra $20-$30 compared to other similar kits - they make fitment easier, eliminate any guesswork on placement, and decrease installation time because of it. Took 2-3 relaxed pace hours for us to do single axle install. Tools required were ratchet/wrench set (13/16 deep socket worked for us for most of the bolts), cheater bar (for working those rusty bolts off), drill, angle grinder (cutter disc for oem u-bolts and leaf spring bolts that are rusted or welded in place, stripper disc for cleaning area around new bracket for welding) welder, floor jack and jack stands. We had to remove the leaf springs, as the wheel mount brackets would not fit through the openings. Was hoping we wouldn’t have to, but it was pretty simple to do. We jacked the trailer up. Removed the wheels. Removed the axle. Cleaned the axle area where new brackets go. Set the height and placement of the new Dexter brackets. We left the OEM brackets on the axle and placed the Dexter ones in the exact same position 180 degrees on the other side. Welded them on. Reinstalled leaf springs. Reinstalled axle, reinstalled wheels. Then voila! We added 6 full inches of height. Super awesome.
# 2
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
Bought this to replace the shackle links and hardware for an existing aluminum trailer, did not use the brackets. Bolt shafts are "flared" on the inside head end so you need a press to push them into the bracket. Otherwise, you need to crank down the nuts as you install them to seat the bolts properly.
Good kit with the necessary parts to replace leaf spring suspension. I welded the hangers rather than bolting them. The parts are not coated for the price point so you will need to paint them or they will rust immediately.
# 3
Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole
These were purchased to assist with raising a dual-axle travel trailer. They arrived well packaged, and looked to be well made.They took readily to welding, so there was no issue with inferior material. The attached images show them being welded side-by-side to the frame rail extensions, then the entire assembly attached to the main frame.
My order was supposed to arrive on Saturday by Monday evening I had not received it I called the lady was very apologetic and said she would research it. She took care of everything and it was here. They were very helpful .!! the part was exactly what I needed Would definitely recommend them for their personnel and their follow up
# 4
SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 3K to 5K - Overslung
I made some brackets to bolt to the frame. Now I have 100% contact with the Sumo Springs. The are working extremely well!
Help a lot with the bounce from the leaf springs
# 5
SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 5K to 8K - Overslung
Very easy to install plan taking big trip in a few months can’t wait to see how they handle. Update to follow.
Only 4 stars since I have only used them on one RV trip so far. I installed these in conjunction with an equalizer upgrade (Morryde SRE 4000) on my 2019 Grand Design Reflection TT. For the one trip I have been on, I liked how these helped cushion the ride of the trailer. I would certainly buy them again.
# 6
SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 3K to 5K - Underslung
Worked really well, definitely smoothed out the ride. We are finding significantly less chaos with the equipment in the trailer. The only complaint I would have is trying to use the Sumo Spring for very small enclosed trailers. The STEEL MOUNT was too tall, to meet the relaxed position height, so we cut 1" out of the mount and re-welded together, and repainted. But other than the additional modification it worked great.
I purchased these for a 2022 Forest River Wolf Pup 16BHS. During the process of replacing the leaf springs I also had these SumoSprings installed to help with a smoother ride and to increase the longevity of the leaf springs. One year later everything is still working as intended. Would definitely recommend this product to anyone looking for a smoother ride or to increase the life of your leaf springs.
# 7
Torflex Lift Kit - Single Axle - 2-5/8" Lift
Fair Price, fast shipping. Thanks etrailer!
Installed on a 2017 NuCamp Tag XL. Needed a little extra head room for the kitchen clamshell. Install was easy with basic tools, a couple jack stands, tape measure and some red loctite. Lift height is as claimed because it directly lifts the axle. Product has worked great, nothing has come loose or shifted. Stability towing has not changed. The only trouble is the wiring for the fender light is a little tight but that is a camper issue, no fault of the lift.
# 8
Torflex Lift Kit - Single Axle - 2-5/8" Lift
Fair Price, fast shipping. Thanks etrailer!
The trailer is a Palomino Solaire 147x. Installation was straightforward. The lift in combination with taller wheels and tires accomplished the desired ride height.
# 9
Timbren Trailer Suspension Enhancement System Medium-Duty Trailers 7,000 lbs
Exactly what I needed. Putting them on today and hopefully it takes care of the weight issues I was having with my trailer. Great customer service with your company. Pleasant shopping experience.
The merchandise arrived in very good condition. Well before we expected it to arrive. If I have to buy anything more for my trailer I will check with the first.
# 10
Timbren Silent Ride Suspension for Single Axle Trailers w/ 2-3/8" Round Axles - 3,500 lbs
My worries about my trailer have been removed. I am very happy with the suspension system and would recommend these suspension systems.
Perfect replacement for my car carrier axles
# 11
Timbren Silent Ride Suspension for Single Axle Trailers w/ 2" Square Axles - 3,500 lbs
Awesome product, awesome smooth, awesome load handling. So awesome I'm back ordering jounce-spring helpers from Timbren for my truck. Item # TGMR15MR
Works great. Love them. Everything went perfect showed up on time instructions were great. Couldn’t been better
What our customers are saying:
"Very fast service. Shipped out an hour after I ordered it.Thanks!!"