Most Popular Trailer End Connector for 2020 Subaru Impreza

Worked out well.

2 things. 1st@: I think there should be an option to pick tinned wire. 2nd: The ring terminal for the ground needs to be bigger.

Trailer wiring got here just today so I can't really review this one. However, I have purchased the same unit before and it's really great. Just make sure you ground it properly and make good connections and it will work fine. Thanks again for a great product and rapid service. Robert

Just what I needed for my home-built bike carrier. My wife rides an e-tricycle and by the time I loaded the trike and a couple of bikes on this platform, you could not see the car's taillights or blinkers. This harness worked perfectly!

This is very heavy duty looking connector and wires. I needed one to replace the damaged one on my Demco car hauler which is built for rental market. This looks as heavy duty as the original. Which didn't break but someone let it drag on the ground and wore half the pins off.

I have been very pleased with etrailer orders recently. Everything shows up when expected and products are as expected. Attached are a couple before and after pictures of my recent project to add lights to a cargo rack per my wife's request. Thanks for the professionalism of all at trailer

The plug is different from original cord. Doesn’t look as good but we’ll see how it works. 1st new cord

I bought this with the Hopkins receiver for the truck side. They work great together. Makes a nice tight connection that works great. The help I got at Etrailer is top notch from answering my questions to tracking my package. I would buy again from them.

Great connector.

Plug arrived on time and as described. I replaced a farm implement electric plug and was better than the original!

I've had this in use for over a year and they don't build them like they use to. I use this on a gooseneck trailer and the piece of plastic behind the spade connector for the clearance lights and brakes has melted, allowing the spade connector to lose contact with the plug on the pickup. So the lights would cut off in the middle of the night and would have to wiggle the connection till I could fix it. I have an older Hopkins plug and never had this problem. To fix the problem I ended up putting pieces of thin copper wire behind the spade and have done it twice since the plastic melted a 2nd time and once again the trailer clearance lights would quit working. Attached are before and after pictures.

Customer service was great, I called for help connecting the 7-way and they walked me through it. Shipping could be better

I've had this harness for a year now. Over the past year we've traveled from South Carolina to Maine, down to Georgia and up to Maine again, with many stops along the way. It's worked fine.

The product was exactly what I had hoped for, a high quality exact replacement for the one that I had that was 17 years old. It arrived when it was supposed to and was easy to install.

I rewired my light bar for my boat trailer with the items I purchased. Before I built the the light bar, every time I used my boat trailer I would waste valuable sailing or fishing time repairing faulty lights. The do not last long when you submerge them in salt water. This light bar now version 3.0 have given little trouble over the years

Great product. Works well when I had a broken connection on my 4 way plug end on my light-up hitch cover I bought from y'all a while back. Always a happy customer. Thanks, George.

Great product no issues at all. Product as described & fit properly.

Tough environment for these…need to keep a spare handy

I rewired my boat trailer using the wesbar 4-flat connector from junction box to the hitch. I do wish the wesbar connector was available in tinned wire. I used tinned 14 ga tinned wire for the rest of the wire and ran a ground wire to every light eliminating the trailer frame as a ground. Also added a switch at junction box for a manual trailer reverse flood lights. Filled the junction box with removable potting Gel to prevent water/corrosion. Works great. No issues. Never been stuck on the side of the road troubleshooting an electrical issue / bad ground. Would purchase this again, unless I could find a marine/tinned wire version, then I would purchase that one instead.

Hefty cable with thick sheathing. Should hold up well to rugged use & the elements.

This trailer wiring kit is PHENOMENAL! I was having trouble with another kit because the wire gauge was far too small causing poor conductivity resulting in partial to lack of running lights. This is a QUALITY harness and all of my trailer lights work perfect now! Thank you so much for not selling junk like many of the competition. Will always go here for future trailer needs! Thank you!

Wiring harness is of a quality build. Happy with the fit etc. My only complaint was the 30' harness was only 27'. My trailer is 27'. I had to make up the extra 3 feet to finish wiring in the lights

I have been very happy with products I have purchased from etrailer. On my last purchase the one of the trailer end connectors was missing the locking retainer screw. Otherwise i have been a very happy customer!

A similar trailer light connector was installed on my motorcycle cargo trailer when I purchased it way back in 2003. When I purchased my new Gold Wing in 2019, I wanted to use the same type of connector. Since I had to add a new female connector to the bike, I decided to renew the male connector on the trailer. I especially like this connector because it always stays secure when connected. I also wanted the connections to be out of sight when not in use. I have pulled my trailer with this new connection for over 2,500 miles and it has performed great.

The person who helped me find the correct part went above and beyond just taking my order and helping me find the correct part. Now I know why my dad suggested that I try etrailer to find the part I needed.

It’s nice to have an inexpensive replacement part rather than buying another whole harness!