Most Popular Fixed Turret for 2020 Ram 3500

This item arrived much faster than etrailer said it would. It came by truck, and the freight company driver was very nice and made sure I opened the box before he left. I installed it myself with some help from my 15 year old son. We used our forklift tractor attachment to put it in place. The Curt Flex Air totally changed the experience of pulling our 5er. It eliminates most of the chucking, and acts like shocks on a car, so ride returns to normal immediately after a bump in the road...which the Flex Air absorbs most of.

Changed out my old pin box for a Curt Flex Air pin box. This one seems to be very heavily built and should last for years to come. Haven’t had a chance to pull it yesterday but am sure it will pull and perform great. Thank you etrailer for another great shopping experience.

Great product for any fifth wheel! Really smoothes out the ride for both the truck and trailer. Easy bolt on install! All RVs should come with one of these!

My wife and I are very pleased with our purchase of this product. We have taken numerous trips with our rig since installing it and what a difference it has made from the standard basic pin box. We no longer feel any chucking from starting off and stopping when towing our trailer. I figured it would definitely reduce it but it eliminated it completely. We tow with a one ton F350 long bed SRW and a B&W hitch. In my opinion It is not a DIY installation because of the sheer weight of the product otherwise I think that it would be. It is not a complicated item to install its just super heavy. In addition to my praise of this product, I would like to recommend the addition of grade eight hardware to be included with the product for installation. I think a few dollars more for the price should more than cover that cost. When it comes down to it the grade five hardware is sub standard for such a massive object in my opinion. It is supporting not only the weight of the pin box but the torque under load as well so for the purpose of safety, which is why we purchased it in the first place the hardware has to come off anyway to take off the old pin box. So why not replace it at the same time. My two cents worth anyway. I would definitely recommend this product to others who are looking to eliminate the chucking felt under a standard fifth wheel pin box.

Stout, quality pin box. Quick shipping and great service. The final condition of the shipping container and some heavy scaring on the pin box left much to be desired from the freight carrier, but scuffs don't effect the functionality of the component.

the fit was perfert. as you can see from the pictures is attached, i drilled a hole in the top to drain water that collects. i fabercated a cover to fit over the opening.

Freight co delivery estimated for Friday, arrived today. (Tuesday). Borrowed a tractor, dropped the old and lifted this monster into place. 12- 15/16 bolts (originally) 18 hole mount. Not sure if the height is correct for the bed, but will adjust it down if after the rubber bumper is inflated, if it doesn’t sit level. The bolt pattern was correct. better get help! From dropping the MFG lippert, to getting the thing lifted an bolts snugged up, about 45min. Will take a bit longer to attach the deadman switch and electrical box. Well crafted, definitely heavy. This should save my truck n RV from porpoising damage as I’m going over Bridges and bad roads.

We're so anxious to try out our new Curt TrailAir. Installation went smoothly, it looks great. We can hardly wait to experience the ride!

Hannah did an excellent job of working with me to find the correct upgrades for my towing system. 5 stars got her. Tge package arrived with the king pin poking through the box and having deep scratches. I think it will function ok. 3 stars for those handling shipments and deliveries.

No bucking and jerking has made for enjoyable RV experience this year. One of the best investments I've made in our RV. prompt handling and shipping from etrailer made it even better!

Delivered intact.

Replaced Rhino with this unit on my Cedar Creek 311RL. It was straight forward and simple, but not easy for this old man to do it solo. Used the tailgate as my shop. Stuck the back up in the air and drove back to insert into the bracket. I then used the levelor on the trailer to line up 2 of the holes to insert the first bolts. I used a car jack near the pin to raise the 230 pound box into line up position to insert the other 8 bolts. Torqued it down and aired it up, then test drove it. Rides like a dream. Much softer on those in the tow vehicle and I assume on the fifth wheel itself. Service from etrailer was good. The advice and recommendations for my specific rig was a little off. But I was able to do research myself. Shipping was timely. Over all another successful etrailer transaction. Thanks to everyone.

We used to have a lot of slop with our hitch and that has lessened immensely since our purchase of the MORryde pin box.

Product was received as expected. Installation went very well. I am eager to try it out this week on the road!

Appears to be able to meet my needs. The unit arrived as schedule however the shipping box was damaged which was no fault of ETrailer but rather the shipper. Will be installing next week.

pART WAS DELIVERED ON TIME AND EVEYTHING WE ORDER FROM THIS COMPANY THE PRODUCT ARRIVES WHEN WE NEED IT.

This is my second Trailair pinbox. They are a step above another. My first time dealing with etrailer and I think they are also a step above.

Worked out great on my 2011 Cameo, wouldn't own another 5th wheel with one.

I have not installed this part on my 2021 momentum 395MSR yet, but it was received in perfect condition. I had the same pin box on my Solitude390RKR and loved the way it handled. If the part does not perform as expected once installed and after I have some miles behind it i'll update my review.

Installed this MORryde cushioned pin box on a 20K# toyhauler(from a solid pin). Comparing 9K miles before and 11K miles after, it made a remarkable improvement in the ride, especially on choppy, rough roads (think I-40 across New Mexico). Easy bolt-on installation. I consulted with the staff @ etrailer.com to ensure the correct hitch model was selected. Shipping was straight forward via truck freight. Excellent communication through the process.

Very great product, took the chucking and jerking out when towing my fifth wheel, would recommend it to anyone, wish I would have gotten it years ago.

Dramatically reduced chucking as hoped. There is more start/stop slop than I had expected but I'm guessing that is due to my trailer being at the top of the weight rating for the rubber block. I need to put a camera on it to verify my theory. All in all a huge improvement.

This Pin box bolted directly into the camper pin box mounting plate. Best of all the longer pin box added more than enough length to the system to allow the our 5th wheel to be connect to the truck with the tailgate in the lowered position. The only negative is that the description of the item stated that the pin box is powdered coated to prevent rusting. The item came with plastic wrap on it and the powder has multiple areas where the paint was chipped.

For those of you who, like me, may have purchased a truck with the under the bed rail system for your fifth wheel you know the positioning of the rail system is set in front of the rear axle instead of directly above the axle making the distance between the cab and trailer that much closer. This can cause a problem hooking up with your tail gate in the down position if you have a medium length pin box on your trailer. etrailer has a great chart online to help you determine what kind of pin box you have and if there is another one manufactured that will fit in the same place. This longer pin box for me was a great economical, safe solution. The Lippert 1716 long box is a direct replacement for the Lippert 1116 medium box, but is seven inches longer giving me the needed distance to hook up.

Hitch king pin box was a perfect fit and installed easily. I just finished hauling the trailer with it on a 5000 mile trip and it worked flawlessly.

First time using etrailer so I wasn't sure what to expect. But they were fast, efficient and keep us updated throughout the shipment. This was a replacement part for a customer shipping their cargo on us to Nome and it had to get here on time, very pleased with the service and follow through. Thanks Tom

So far this is a welcome upgrade. Took it on a short trip over some rough road that normally triggers chucking on my F-250. This pinbox prevented it which was a welcome change. I’m looking forward to some longer trips. Installation was straightforward. Removed the old pinbox which was fairly easy. Installing the new pinbox would’ve been a challenge had my buddy not had a forklift attachment for his tractor. I don’t know the exact difference in weight between the old Lippert pinbox and the new Moryde, but it is substantially heavier. I’d say 2 people muscling and one to install the hardware would still be a challenge. Forklift or similar is the way to go. Also, the new pinbox doesn’t come with new hardware. Got to use your old or make a trip to Lowe’s/Home Depot. All and all I’m happy with the upgrade, but I thought it was pricey and don’t like the additional weight.

This cushioned pin box is definitely worth the upgrade. Chucking is greatly reduced (There's no getting totally away from it) and the frequency of the chucking is tempered making the ride much more pleasant. There are times when you forget your towing it's so smooth on decent stretches of road. Delivery was quick (3 days early as a matter of fact) and driver dropped it in my garage. Plus the fitment was perfect, bolted on with no problem. Entire experience was good !!

The pin box worked out very well. You still feel the bumps but almost no chucking. My wife likes to sleep in the truck with her head against the head rest, but she could not do that with the old pin box. The only thing that I had to do with the new pin box was drill out the holes because the old pin box had bigger bolts.

We have gone over 2000 miles and the MoRyde Cushioned 5th Wheel Pin Box fot the Lippert Rhino and it works great!! What a difference it made in pulling my 5th wheel trailer!! It was the best investment I made for my 5th Wheel !! Easy to install if you’re handy! I would highly recommend this product!!

Ordered the Morryde pin box to replace the Rhino pin box on a 2022 Riverstone Reserve. Shipping from Etrailer was right away but had a little delay with the shipment because the semi truck could not get up my road. Taking off the Rhino pin had a little trouble as one of the bolts was cross threaded, which I have read from others also having the same issue. The Morryde came with all the hardware and with two people had it changed out in about an hour. Took it for a small drive and really seems to make a big difference, will get it out for a longer drive soon on my next trip. The new pin box went in the same position as the old one and did not change my level or bed clearance.

It's a great pinbox. Really helped with chucking and compatible with my Demco sliding hitch. Also no issues with delivery, was helped by Pam and Jessie. They are awesome people to work with.

I have had many coach's with this hitch, that is why I am changing out the one currently in the coach to this. UPS delivery sucks. Box was misrouted to another terminal after arriving at the facility near me. Caused an extra day's delay in delivery. When box did finally arrive it was virtually destroyed and driver claimed box showed up open and that they had to retape it this morning ING before delivering it.

Excellent buying experience. We were able to remove and install the new pin box ourselves. E-trailer’s videos were very helpful as well. Super excited to experience an improved ride.

Entirely better experience towing, my wife and I picked up our 1st 5th wheel toyhauler camper and towing it home it started jerking back n fourth, not knowing what the hell was going on she wanted to return it. I did some research and found this Moryde cushioned pin box and it’s super smooth. We’re both very happy and feel a lot more comfortable towing places.

My original king pin failed so with the help of etrailer's (Stacey A) amazing customer service we found an exact replacement. It was easy to install with instructions and girl power!! Thanks etrailer for your help.

Perfect fit, went on easily! Thanks etrailer for all your assistance!!!

The product is exactly as described and as shown in the pictures

When I got it, there was like eight or nine scratches the bracket that hooks to your camper that hooks to the plate the lip that bends over was bent up so I had to use a hammer to knock it back down and a couple other places where it was looks like it’s been dropped It’s far from his heart, but it don’t look the best.