Most Popular Roof Rack for 2019 Tesla Model 3

Decent rack for the money. The locks are a bit finicky due to the metal/composite combination. They definitely require graphite lubricant regularly. I've only used it with 2 pair of skis and it works well.

Howzit etrailer.com & staff. the rack itself is sturdy and more aero than comparable units. For my 2017 Subaru Crosstrek (OEM) Aero Bars, it was necessary to shim the (rear) lower/leading edge clamp assembly with two 1/8” x 1.5” x 1.5” (EPDM) rubber pads. The bars are shaped like a wing – and these shims helped to level the rear rack with the one in front. Overall - it looks very clean and functional. I might screw on some rubber ends over the ends of the mounting bolt to complete the project. Time to make some turns. Thank you!!

Just got my Yakima Fatcat EVO 6 ski carrier (black finish) and I am stoked. Note that this is different than the Fatcat 6 (non-EVO, previous generation) carrier. This is my first ski carrier, but I and/or my kids ski about once a week at Alta and Snowbird when the lifts are running, so I expect it to get lots of use. Etrailer shipping was fast and item was packed in a sturdy secondary box. PROS: 1. I love the sturdy build and quality finish of the carrier. 2. The design allows many micro-adjustments to fit to your vehicle and to fit the skis. For instance the spring-loaded hinge on one end and the lock on the other end can naturally accommodate different thickness skis. 3. Carrier has a usable width (i.e. width of skis side by side) of 32.75 inches (832 mm). For those that are not skiing on 75-mm-wide skis from 30 years ago, this carrier might actually allow you to fit 6 pairs! 4. Separate mounting brackets for aero or for square/circle cross bars. The aero brackets fit securely on my Acura/Honda OEM cross bars. The flat part of your skis will be about 3 inches (76 mm) above your cross bars. 5. A built-in lift bracket that lifts by an additional 3 inches (76 mm) the hinged end of the carrier, if you have really tall bindings (I don't think I'll need to use it). 6. The aero brackets use a rubber coated steel strap to wrap under your cross bars. This strap has a quick release cam on one end that can be operated when the carrier is not key-locked. This means you can remove or install the carrier without tools in about 4 minutes, once you've done the initial install-related tuning. While the carrier seems sturdy enough to leave on the vehicle all winter, I expect I'll only install it on ski days. This feature really sets this model apart and for me was its biggest selling point. 7. Yakima packages the carrier in a nice-looking sturdy cardboard box with a flap lid. I can fit the two parts of the carrier in the box, with the brackets/straps still installed, for convenient storage (see picture). CONS: None so far, though I haven't yet actually hauled skis up the mountain! After this ski season is over and eTrailer asks me for a follow-up review, I'll let you know. I'm also thinking about seeing if the ski carrier can be attached to my small hitch-mounted cargo carrier. That would make loading and unloading the skis easier than on the roof.

First off...you can't beat the service of etrailer.com. I was looking for a ski rack for my son's 2012 Subaru Impreza with the factory roof rack (base model not the sport). I could find no reviews of anybody installing one of these on one of those. I took the plunge and will say that I am very happy with the outcome. The installation is a bit tricky and four hands help, but after the first one was installed we had the hang of it and the second one went on very quickly. Even with the expedited shipping this rack was about $50 cheaper than the Subaru ski rack. Again the etrailer.com service is fantastic. I have purchased products here before and will do so again.

Great product at a great price. Fit an adult snowboard, two sets of adult skis (one set stacked, one set side by side because of how close the bindings were to the roof), and a set of youth skis. Fit snug. Only got up to about 73mph on the highway, but no issues. Some normal fluttering on the snowboard/skis. If you have a torque meter to tighten the bolts that's ideal but I didn't. I just got them snug enough to where I pulled back and forth on the rack and it didn't move.

Works awesome with the snowboards, easy to attach/detach, and durable. Locks and holds fine, initial ordering was confusing and hard to figure out since it’s not a package, and had to get individual components. Rhino rack could definitely improve that! Otherwise it would be 5 star.

These rack are great, I have them on both of my SUVs all winter. The etrailer seevice was excellent as well.

Rack works great. Slide out makes loading and unloading much easier. So far we only put five pairs of fat skis on. Might have room for one more pair if I closed the gap between pairs but we didn’t need six pairs for that trip. Only problem was the rack froze up after driving through fresh rain. We had no problems with freezing while driving through salted slush. So far we’ve used it on two longer ski trips to CO from AZ. It’s quiet and strong. We once had a cheaper rack release our top model, expensive, skis onto the highway at 65 mph. That’s why I bought a Kuat.

Been a great purchase. Fits 4 pairs of skis and a snowboard with room to spare. Could probably fit 2 boards and 3 pairs of skis easy.

Excellent ski rack. I purchased because I wanted absolutely no noise. This thing is super quiet went flipped up or down. Love the looks of it flipped down. Absolutely no complaints. Easy to use and set up.

Quite an amazing product. When it arrives, you think, "Oh man, how is this going to make it the whole trip?" But I can tell you that I traveled from Fort Worth to A-basin/Keystone and back with no issues. That's 1640 miles there and back at speeds up to 85 mph and at least 3 of the world's climate zones on just this one trip. It is best practice to give each of the suction plungers a few taps every time you gas up, but I forgot a few times and it still caused no issues. Simple assembly with 4 suction cups and 2 of the high-density plastic racks that connect to each other with an included alan key and headless screw. Also includes the high tension straps you'll need to fasten skis/boards at the front and rear of your gear. When I say this rack was solid, I mean like I'd touch it to test for stability while driving and gassing up and it felt like it was sitting in hardened cement. Absolutely rock solid. And, there's a spare strap and plunger included. A couple minor things worth noting (but none of these could justify taking away from the 5-star rating I gave this product): - The suction cups require a clean surface, so don't take this lightly. I took mine to a car wash right before mounting. - The clean surface must also be smooth and seamless. I didn't notice until I started mounting that my truck has a grooved roof, so I had to put 1 rack on the bed cap roof. It worked great. - I wish there was an option just for skis b/c these racks were about 1" too tall to fit in the garage while mounted to the roof, and it's obvious the height of this product is to also accommodate snowboarders. Like I said, minor stuff. 5-stars all the way. You won't regret it!

After using this rack for a whole season, I’m very satisfied with it. Works exactly as expected. Very unique design that allows me to carry 2 boards on any car. You might be able to squeeze 4 if you can line it up so the bindings don’t touch. You do have to be careful mounting the rack on your car to make it stick. It’s important to wipe any dirt off and moisten your roof with a little mist of water, but after you do that it sticks really well. No problem driving 70-80mph with it. I really like having a sunroof to mount the front suction cup on because it allows me to watch the vacuum gauges to make sure that the rack is firmly attached from inside my car. So thankful to seasucker for making a product for those of us who drive sports cars and ski/board!

This rhino product was the perfect solution for me. With a roof rack nearing capacity, I still wanted an accessory for my fishing rods AND ski’s. This rhino product filled that need! Super easy to install in the T-track. Thanks agan!

So easy to install onto Thule AeroBlade. Quality materials and convenient design. No significant noise noticeable from wind resistance when driving. etrailer provided great shipment/notification support and was great resource for how-to videos, commentary.

Better than I expected. Only comes with four core locks so be aware of that if you want six like I did. Bought two more locks from Thule with the same key #. Mounted this carrier on my Rhino Rack. Perfect fit and looks great. Would highly recommend.

Love it!!!!!! Great ski rack replacement for older rack. The extended slide is incredible. The eTrailer support helped me pick the model that worked for my car and crossbars. Another wonderful purchase from my go to source for bike/ski or other related products!

Fits our 4 skis and 1 snowboard, 2 skis are for kids which makes it easier. Slide out is really helpful so we don't have to climb over the car to put things on the rack.