Most Popular CURT for 2018 Ford F-150

I had already had to return 2 hitches to another company because they sent the wrong ones. I ordered from etrailer.com and got the right hitch the first time and it has been amazing! The directions wanted the hole drilled in the wrong spot in my bed so before you start drilling make sure you measure and check and double check EVERYTHING. But that was literally the only thing that wasn't perfect. I haul valuable lives with my truck and this hitch has been great!

2014 F150 Wow, what can I say, this is an extremely solid, well built unit. I knew it was about 90 pound, but when you take it out of the boxes the quality really hits you. Everything fits just as it is supposed to. The bolts are all Grade 8, and when you get everything torqued you know this unit is truly part of the truck frame. Maybe a little over kill for our 5500# Escape 5.0 TA, but I wanted that confidence while connected, and I got it. Coupled this with the Anderson Ultimate Hitch in Black Out and couldn't be happier.

It mounted perfectly in my 2015 F150. Getting the rubber seal on, was a chore. Torquing the bolts was tricky in confined spaces under the truck and in the wheel well, but it can be done with a 2' torque wrench and all bolts are reachable. 1-2 clicks at a time. There's no way this is a 90 minute job for a novice, especially without a lift. Plan on 4 hours. the 43.5" measurement adding 1/8" with bedliner is dead on. Measure 3 times to be sure. The instruction are good, but it's easier to follow the installation video.

Works great and easy to install.

Great hitch. Used it several times to haul my cattle trailer no issues. Very easy to install with minimal tools. Everything fit well. I have a rubber bed mat and the rubber hitch cover is almost the exact same thickness making the bed %100 usable when the hitch is in storage. It also does a great job of keeping dirt out of the hitch.

Unit installed and pulled my fifth wheel to provincetowne Mass. Unhooked and pulled the ball out and picked up some firewood. Nice flat surface. Love it. Only way to go.

This thing is HEAVY DUTY!!! Fits right in to the standard fifth wheel hitch rails and even comes with (4) new hitch pins to secure it with. Highly recommend to anyone needing a gooseneck ball that already has a fifth wheel hitch installed.

Hardest part was removing the fifth wheel hitch from the cross bracket due to it being so heavy. The gooseneck adapter was a breeze to install and works flawlessly.

I received it just as I pulled the fifth wheel hitch off. UPS put it on my tall gate I opened it up and installed it in less than 2 minutes. Prefect fit tight no slop. I give this company a 5 AAAAA +++++ rating. Fast shipping. Thanks Bill at etrailer Happy Trails

I have been through a lot in my life time but after talking with Kelly an I placed the order I could not be more pleased with the hitch! It was a perfect fit and can’t thank you enough!!!

Installed on a 1995 powerstroke, slight modification required to make my air bags sit correct, but only to the air bag brackets not the hitch. I pull a 32’ stock trailer and exceeded the hitch manufactures weight rating on a weekly basis. Self installed and It has been on for about a year with no trouble. This seems to be just as strong as the B&W on my other pickup that I’ve had for more than 10 years.

Awesome gooseneck Hitch!!! Easy installation !!!

The kit arrived in two days. The quality is very good. All the parts fit as described. We were able to install it in a few hours without a lift. We plan on pulling a 14,000 # trailer to move farm equipment. This trailer will replace an old 12,000# pintle hitch trailer. I would definitely recommend this kit to others.

I like the hitch but when ai am pulling my trailers, and I am moving them around at low speeds it seems that there is a good amount of movement in the hitch and the feel in the truck. I’m not sure what that is but I have used trucks that didn’t have that feel in them but mine definitely does. We followed all directions and torqued all bolts to the required amount. Maybe someone can shed some light on what that maybe. Thanks

Overall good product. I added 2 pieces of 2x2 (¼" thick) angle iron to the back of the base plate to stiffen up the plate more. I've used it on a 3500 dually pulling fully loaded dumpster trailers with no issues at all.

Great service, fast delivery.

I have used these three times now pulling a 14k fifth wheel. They work great. Easy to install and no huge hitch tying up my truck bed. The last hookup I had one of my safety chains hooked to short. Made a fairly sharp turn and heard a loud pop. I had it looped through the chain holder and back up to the camper. It straightened the hook on the chain but didn’t phase the Curt chain bracket in the truck. These things are tough.

etrailer was great! I received Gooseneck hitch in a damaged carrying case (used to store the hitch hardware). etrailer immediately sent a new carrying case. etrailer has GEAT customer service. Thank you!

I installed the Curt gooseneck on my 1993 GMC 2 Wheel Dr. 2500 truck. All the components have tight tolerances. It took me eight hours. With a socket and the wrench. Laying on my back. I did have to cut the wheel well lip about 3/8 of an inch off because I could not get that front angle bar to slide in without hitting it, no way around it unless you lift the bed up and I wasn’t going to do that!!. You have to cut it.instructions do not state that. I’m very happy with the Hitch, it is definitely stout! I did have to make a notch on the outside brackets to go over my airbag bolt. I also had to remove the support bracket on the inside of the frame for the airbag and the crossmember for the spare tire to get the front angled bar in.

This is an excellent product. I installed the hitch myself and it was pretty straightforward. I did a lot of research on installing a below bed hitch to make sure it went well. I did have a small issue with getting one of the bars in. I put a call in and got great customer service. After a year of use I have had no issues at all. I will definitely use etrailer in the future.

Ordered this after deciding to go with it over a B&W kit due to me not using it a whole lot and the price difference. When I received the package 1/2 the hardware was missing because the inner box it was in was all broke apart and the outer box was not sealed up. So I would have to give the packaging and shipping one star because I had to go spend an extra $75 on grade 8 hardware. The paper directions were not totally clear on several thing so we resorted to the video which helped a lot. The two large carriage bolts that go in the rear cross member are a little deceiving because the video makes it seem like they slip right in. However, the heads were larger than the pass through in the frame rails so it took quite a bit of extra time and ingenuity to get those fished through there with the plates.(The carriage bolts survived shipping so they were what came with the kit). In the video it showed where he cut a large u out of the inner fender to clear the pull handle and notched the bed that looked kind of sloppy. With a few extra measurements you can just cut a hole in both for handle to slide through and give it a much cleaner look. Definitely recommend putting a bolt through receiver holes and using a strap to hold up center plate through hole in bed after you get it into place. Makes life a lot easier until you get the bolt ls in. Overall this hitch works and functions great. Install went pretty smooth with two people and I would recommend it to anyone needing a hitch.

Great product w great instructions. It was an affordable package that installed decently. We have used the hitch for a year now and have had zero issues w it. The only reason for not giving it 5 stars was because the cross bars that go between the frame rails needed to have the threaded holes chased w a tap to remove the powder coating prior to installation. I initially tried installing it without chasing the threads and the bolts started to get very tight before the parts even pulled together. Once the threads were clean, everything assembled very well. The hitch takes time to install, at least if you want it to look good and be correct. On a 1500 ram, you will probably need to install some form of helper spring or air bags to prevent the rear from squatting from the weight of the gooseneck trailer…the factory 1500 coil springs are not firm enough on their own.