Most Popular Metal for 2017 Nissan Pathfinder

Installed this vent into my Haulmark Transport 6'x12' enclosed trailer. Installation was easy, I cut a 14.25" x 14.25" inch hole between two crossmembers in the roof and dropped it in place. Because the roof on this enclosed trailer is so thin, I used a piece of 3/8" plywood so sandwich between the interior garnish and actual vent. I cut the same size hole into the plywood and left a 2" lip all around. I use 28 #8 x 5/8" stainless screws to hold it in place, pre-drilled with 1/8" bit. I then used roofing tar to seal the vent and put masking tape all around, leave 1" from the flange to ensure good coverage. I then removed the masking tape, leaving nice clean lines. Interior garnish is held in place by #8 x 3/8" galvanized screws. Huge kudos to etrailer for carrying such awesome products for great low prices and offering super cheap shipping to Canada!

So far it's holding up with no leaks. Kind of on the flimsy side comparing to the one removed but easy to install. Couldn't use the trim ring inside but after a year still looks new and the lifting/lowering mechanism works smoothly. Overall a good price for the quality.

Perfect replacement for my 2012 Keystone Passport travel trailer.

Was missing the retaining clips on both items. The old ones were ok.

Good replacement product for my RV power vent. Fast shipping too! And a great price.

Operates as described but when closed lifts slightly (flutters) in windy conditions. I’m concerned it might leak when it rains but haven’t been in those conditions yet.

This vent was bought to replace one of the roof vents on my recently purchased used horse trailer. The top section of the existing vent was completely missing so rain could come right on in. It was easy enough to remove the damaged vent. Took a bit of elbow grease to remove the old sealant off the roof. The new vent is EXACTLY the size needed and installing it took less than an hour. Now the vent is fully functional once again and no more rain coming straight into the trailer either!

I replaced all 4 rusted and broken vents. The new vents with rubber gaskets fit perfectly, used the same holes. A very easy install, maybe 1.5 hrs.

Well made vent should last years. I like the removable screen for easy cleaning. Unfortunately the roof vent mounting flange is badly damaged. I will need to do some work with my hammer and anvil to make it useable. This is clearly incorrect/damaged.

I’m very pleased with the quality of the vent and how easy it is to open and close. This was a replacement for the previous vent that became inoperable and leaked.

It’s been one year (1/4/23) since I purchased and installed these products on my 1994 Airstream Trailer. The complete kit was more than adequate for my job given that the trailer had a few other areas requiring attention or needing the self-leveling sealer. I waited for the ideal conditions (weather, temperature, and time of day) before applying the parts and sealing a few other external components. We’ve had several rain events and temperature swings and these products have held up very well. The trailer serves more as an office now which increases the importance for not having leaks! This was a great choice to select these projects and particularly, from this vendor. They were very responsive and quick to get the order out. Thanks to George and his Team! Happy New Year 2024

The vent works fine but the inside trim that is supposed to go up to the vent so you can’t see the roof framing is about 2” short. If your roof is more than 2.5” thick you will need to reuse your old trim or make something to close the gap. Maybe I ordered the wrong one?

This fan has worked great for my motor home. If you need a stronger breeze, this may not be the fan for you.

Quick delivery and easy installation. My camper is a little older but this vent fan is an exact match. Bery happy with the removable screen for cleaning great feature the old vent didn’t have.