# 1
Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
The wet bolts were just fine. But the "locking nuts" with the crimped edges were aweful. The 3 dimples each nut has were not useful. Many of the nuts I could use my fingers to spin them on the bolts. Never had locking pressure. I ended up going to local hardware store for much better locking nuts.
I used these "wet" bolts on my leaf spring change out. I ended up using 3 per equalizer since that seems to be the location of most of the movement during axle travel and a friends 5th wheel had 3 installed on the factory set up, so that is what I went with. I painted a yellow mark on the head of the bolt in reference to the grease hole in the shaft, so that I could install them in the direction of "least resistance" when greasing them later, after reading how some guys have to relieve pressure on their trailer in order to get the bolts to take grease. I used Mystik 6 grease mixed with anti seize when putting everything together, then gave them 2 shots of Mystik 6 after installation. (I chose Mystik 6 because we always had good results with that grease when I was in the aircraft industry and it doesn't was out.) I did notice that the grease zerks did allow grease to return out of the fitting which means the spring behind the ball isn't doing its job. That is why I rated them as "good". There are different ways to install these due to the knurled shoulder. If you have access to an impact gun you can just tighten them in with that. Pulls the knurl right in to the shackle. Overall I like the idea of having a suspension that can be greased.
# 2
U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7-1/16" Long U-Bolts
Ordered a lot of parts for a dump trailer rebuild in Sept. Didn't install some of the final parts until Christmas break. THEY SENT COARSE THREAD NUTS INSTEAD OF FINE. I ruined 2 u-bolts and need all 16 fine thread nuts. I'm outside 60 days so I was told I'm on my own. I've spent $5k+ on etrailer. I'll find some place else.......
U-Bolts and hardware seem to be good quality. Package was delivered when promised. Very satisfied with purchase. Will be buying from E-Trailer again.
# 3
Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
I needed it quickly because on stripped on my trailer and we were getting ready to leave the state in our Wold Pup. I paid for the extra shipping and they got out and to me in 2 days. Thank you.
These are the exact bolts used by the manufacturer of my trailer. I had a spring break after 10yrs use, so am replacing the springs and all the bolts at the same time, thank you to etrailer for the springs (ordered earlier) and now the bolts/nuts, all arrived quickly and accurately, you are my first choice for all trailer parts for my 7 trailers, thank you and keep up the good work!
# 4
Replacement U-Bolt with Nuts for 1-3/4" Wide, Square Trailer Axles - 9/16" Diameter
Worked and fit perfect. Thanks
Quick delivery and excellent customer service (with follow-up emails to ensure that everything was ok with the order). This replaced a broken bolt on a 1956 camper trailer, and it's a very close match to the original.
# 5
Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
Just what needed for my trailer. My old leaf springs were so rusted that I was one pot hole away from being broken down on the side of the road. These new ones are perfect.
When I asked questions about my order they answered back quickly. Everything fit like it should. Yes time will tell if the springs are good.
# 6
2" Square Trailer U-Bolt (Qty 2)
Had a leaf spring break on my off-road trailer in Mexico. Left it at a boat yard until I received the parts from trailer & returned to replace. Only took 2 hrs to replace both leafsprinhs, shackles, bolts etc. And we were back on the road.
Melissa T Provided excellent customer service. I Would recommend to everyone use etrailer.
# 7
Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole
These were purchased to assist with raising a dual-axle travel trailer. They arrived well packaged, and looked to be well made.They took readily to welding, so there was no issue with inferior material. The attached images show them being welded side-by-side to the frame rail extensions, then the entire assembly attached to the main frame.
My order was supposed to arrive on Saturday by Monday evening I had not received it I called the lady was very apologetic and said she would research it. She took care of everything and it was here. They were very helpful .!! the part was exactly what I needed Would definitely recommend them for their personnel and their follow up
# 8
Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole
These hangers are great for the center. They provide just enough clearance for your equalizer. Because of the length and being that I am a welder I added a support inside the hanger to keep them rigid!
Megan was very helpful with helping get this order together and communicating with parts being shipped from other locations. Thank you so very much Megan!!!!
# 9
U-Bolt Plate - 2" Wide, Square Trailer Axle - 1-3/4" Wide Spring - 9/16" Bolts
Have started replacement, delay due to health, after removing old suspension on one side discovered that the U Bolts and the base plates do not align, the holes and bolt widths are off,no possible use. Compared the old plates to the new which showed the irregular hole pattern. The bolts do not work with the old plates either. So I'm just using the old hardware.
Melissa T Provided excellent customer service. I Would recommend to everyone use etrailer.
# 10
Front/Rear Hanger for Double-Eye Springs - 1-5/16" Tall - 9/16" Bolt Hole
Not bent enough. Open end measures over 2”. Not a huge deal but would be nice to have them closer to what they need to be before welding. I will have to tighten them up before full weld.
Just as good as the ones from the big box stores but way cheaper.
What our customers are saying:
"WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!"