Most Popular Tandem Axle for 2016 Dodge Durango

The holes to mount to top of axle fit fine. It's the holes the mount on the side, to the frame bracket are filled too low. They're off by half a diameter.

I purchased this item for 2015 micro mini with torsion axles.Simply put, the suspension lift for this trailer is no longer available.Three of the holes lined up perfectly.The 2 bottom holes and the one front one that bolts to the trailer. With an angle grinder, I cut the button rail of the lift kit with an angle gri der and had to drill the top hole of the bracket on the trailer to install the fourth screw and torque all bolts. It fits and operates perfectly and my minor mini went from 6 inches of ground clearance to 9 inches of clearance at the lowest part of the trailer. A beautiful retro fit for an item that is no longer available for purchase anywhere!!! If.your handy with an and grinder this modification is possible with this kit and well worth it!!! Sorry no photos as of yet.

Some of the pieces in this kit are of questionable quality. In particular, the threaded center of the nuts are not round, and will not thread on to the bolt. The kit comes with 14 of these nuts, and 7 of them are unusable. This is unforgivable, considering the issue has been reported at least since 2023, as there is a review and accompanying photo on 05/16/2023. So if you buy this kit assuming the problem has been corrected, you will be mistaken. Other than this issue, the kit seems to be acceptable.

great construction, but the screw to connect to the trailer was not long enough.

I thought I was getting 5k threw 7 k hanger brackets. I got the bigger 8. To 12 k hanger brakets for my upgraded 8 k slipper springs. I love it. 1/4 in thick all way around. Perfect for dump trailer. . Thicker than origanal . And to buy seperate hangers is Awsome. N stuff just awsome. And price I can replace spindle also ? Thanks for reasonable price

Fantastic Kit. Excellent Quality.

Exact replacement part. Post office had a hiccup so it took a week to get my parts but etrailer shipped it right when I ordered. Thanks etrailer

Exact duplicates of the stock Dexter equalizers. Removed nylon bushings and replaced with steel bushings with wet bolts.

The folks at etrailer went out of their way to be sure that I had the proper axels , springs , brakes and hubs to rebuild our 35 year old trailer . I can’t say enough about their service and products !!!

Yes, I received the kit today. it arrived when stated.

Great fit. I called to ask what I needed and etrailer made the right suggestions. Fast and friendly service for you trailer needs.

Bought a used car trailer in need of repair, sand blasted and painted the trailer. While working on it more and more things needed to be replaced. This hanger kit was a great match. Thank you etrailer.

This is a multiple product review. The long bracket are good. The shorter brackets are of the same good quality. The issue is using the short brackets with the shackles. The shorter brackets could be narrower so the shackle line up better with spring and other longer bracket. We used washers to make it align better. The greasing bolts are good, but could be longer. so we could only use 2 of the 6 and had to use normal grade 8 bolts.

we plan on doing more business our trailer seem to be a hit see attached photo

These were a direct replacement for my 25 year old dump trailer. I removed the plastic bushings and used brass.

The bolt holes are not bored center of the lobes and are not 90 degrees to the stock. The egg shaped equalizers I am replacing have more material remaining on the thin side than the new ones I just received from etrailer. NOT HAPPY Must Resolve This Issue ASAP

Your knowledge of the parts was excellent my trailer is an older model and I was concerned on receiving the correct parts. Thankfully they are a prefect fit and the delivery was right on time. Thanks John

The equalizer bar was a perfect fit, replaced the rusted out original, exactly. E trailer also had the best price and cheapest shipping...which showed up 2 days faster than expected!!

Worked great for a 3500# dual axle Stealth Apache snowmobile trailer. Informative dimensions in product description. Removed the included plastic bushings and installed MR46ZR MORryde upgrade kit.

Product seems to be of good quality. It's been one year with no problems.

Need to be stronger as do the axels. Despite being under the max load for the Malone mega sport and not traveling at over 60 mph when towing I have now had 2 1500lb axels and this is the 3rd set of hanger brackets as they crack on the sides and the axels bend partly die to poor conditions of the roads but also due to under engineered for the job and weight intended. Apart from the the mega Malone megasoort has held up. Suggest a better design for the mega sport as it’s intended for outfitters not occasional use.

Work as spected

Just installed the lippert center point and I have to say very impressed on how well it’s built. Super easy to install and I can’t wait to take it down these California roads and see how much better it rides. Installed on a 2022 jayco eagle Ht 29.5 BHDS

Very complete kit. This kit even has replacements bushing and greasable bolts for the far ends of you leaf springs. Only downfall was the shackles were bare steel. I would have like to seen these powder coated. Overall an easy install and a great kit. Now it’s time to see if it was worth the money. SUPER FAST SHIPPING AND GREAT CUSTOMER SERVICE FROM E-TRAILER AS ALWAYS. Thie installed on a 2020 Momentum G Class 23G. The only modification was to turn the fresh water dump valve 45°. I will eventually replace the valve with a cable pull dump valve but this works for now.

Great service great part and very good communication from the seller!!!!! Highly recommend using them for any and all trailer parts needs they most likely have what most don’t! Thank you trailer your doing great!!!!!

These were purchased to assist with raising a dual-axle travel trailer. They arrived well packaged, and looked to be well made.They took readily to welding, so there was no issue with inferior material. The attached images show them being welded side-by-side to the frame rail extensions, then the entire assembly attached to the main frame.

I love this suspension its quiet and the handling and ride is the best I have ever used on a trailer. Gonna buy another set for my gooseneck trailer. Will never go back to leaf springs!

I used these to replace the leaf springs and equalizers on a 20’ gooseneck cattle trailer that I rebuilt. The ride is great and the usual rattling and clanging of the trailer going down the gravel road is gone. So far I am very happy with the ease of installation and the performance of the suspension. I guess only time will tell about the durability of the rubber components in the long run.

Overall, the brackets are as specified and appear to be a quality metal. I’m not sure if it’s by design, but the inside width of the legs at the bolt holes are slightly wider (1/8”) than the inside width at the top at the bend. But I guess that is better than it being tighter to get the leaf spring into it.

They were a perfect replacement part the fit was excellent. They now have about 10k on them and show no signs of wear