# 1
Pollak 7 Pole to 4 Way Connector Adapter
This adapter plugs in to the OEM receptacle without any excessive effort and the flat 4 pin connector on my utility trailer also plugs into the adapter without any excessive effort. As a bonus there is a cover for the 4 pin side of the adapter to protect it the elements when not in use.
I wanted one with a LED tester built into it to "trick" my SUV into thinking I had a trailer connected when really it was just a bike rack so the car didn't slam in it's brakes while reversing thinking it was something else. So I bought a different adapter. The picture slightly deceived me into thinking this had LED tester because the plug is attached by a rubber string (that I thought was a wire). So add another picture of the other side and that would eliminate my confusion. 4 stars because it probably works the way 99% of people would want to use it for.
# 2
Adapter 4 Pole to 7 Pole Vehicle End Trailer Connector
This product works as expected. There is not too much to the installation, just plug it in properly and mount the ground wire. I did not find an easy way to mount this to my wife's Odyssey, or to the trailer hitch (item# 75270). Luckily, I do prototype design and manufacturing. So I came up with my own solution. I designed and made my own bracket to mount the 7 pole to the trailer hitch. It works like a charm, and looks great!
this connector along with the short L bracket and the mount bracket- gave me a nice connector to my hitch. Though I used the short connector and did have to slightly bend it to allow the 4 to 7 pole connector to fit. If Id bought the long L bracket-- It could have worked-- but bending a little worked well.
# 3
Adapter 4 Pole to 7 Pole and 4 Pole w/Test Lamps
Perfect . My new Subaru hitch has a flat plate to which the dealership attaché the 4-flat. I used “2 L-brackets” to accommodate the 90 degree bend of the adapter bracket.
I recently had a receiver hitch installed on my 89 Silverado and the wiring was merely zip tied to the safety chain connection. Well that didn't sit well with me. I wanted a more permanent wiring connection point. So I purchased your 4 flat to 4 flat and 7 way plug and installed it. So far so good. The installation turned out perfect and it looks good. The test lights are a great thing as well. I couldn't be happier.
# 4
Pollak Trailer Connector Adapter - Vehicle End - 7-Pole Round to 7-Way Blade
I received this item in a plastic bag, for a few moments i wondered if it was a knock-off. I had done my home work and was sure that this item would be compatible with the socket on my John Deere 2013 5085M at the time I ordered it, not so. The 'holding ridge' at the plug-in end was not in the right position when fully inserted into the plug on the tractor. I sent multiple pictures to Pollack Technical Support but they were unable to assist me. I finally modified the item myself (something I really hate to do) so that it would fit the plug-in and be 'grasped' by the cover/holder on the tractor side. As I anticipated, the thickness of the plastic was inadequate to make the adaptation 'sweet', so I had to cover the resulting hole with silicone caulk.
Got it just when it said it would be here. The 7 into 7 plug that was ordered is already on the truck an trailer. Thanks Guys.
# 5
Pollak Black Plastic, 7-Pole, RV-Style Trailer Connector - Trailer End
Product so far has worked great for a pinched/cut OEM 7pin cord. It isnt weatherproof like an OEM connector to the cord-as well as the female end of the connector but then its just the connector so totally sealed is not the design for this. It works fine & currently has saved me from having to purchase a connector & wire cord as 1 piece & some shennagins with installing that set up.
Dunno It took 36 hours from "shipped" email until it left the Wentzville P.O. this morning. Don't think it will get the other 400 miles by tomorrow morning.
# 6
Adapter 4-Pole to 7-Pole and 4-Pole
Really nice trailer wiring adapter. Very easy install. Takes about 30 minutes with all the tools needed. Drill, 7/64 bit for pilot holes to mount the bracket, flat blade screwdriver and 11/32 nut driver and two #10 self tapping metal screws with locking split washers and a couple zip ties to tidy up the wiring harness.
I looked at so many options before deciding on the B&W hitch, but I have no regrets buying it. There is nothing that my car is suitable for towing that this thing can’t accommodate. I even use it on the front hitch of my mower to move trailers around the yard! Adjusts very easily and stows nicely (though on my Ford Edge it rides lower than I like when stowed).
# 7
Hopkins Endurance 7-Way Trailer Connector Socket - Vehicle End - Ergonomic Design
I do not recommend this product. I bought this for my truck. It seems to be the nicest looking plug on the market but after the first rain, the plug was filled with water. I changed the location from the hitch to the bumper and once again the plug was filled with water after it rained. This condition will obviously lead to terminals corroding and/or wires being shorted out. I have bought a different style plug, unfortunately the same brand but hopefully I will have better luck. May be able to drill a small drain hole in the casing to allow water to escape but shouldn't have to do this on a new product.
I bought this socket for my 2006 Volvo Xc90 to wire in the 4-Pole harness I also purchased from etrailer. Already had a few 7 Blade to 4-Pole adapters from my previous vehicle, and wanted the option of adding a trailer brake wire for a small camper later on so that was the main reason for the purchase. It also went very well with the Hidden Hitch I had already installed, bracket mounted right up to the existing tabs on the hitch. Super quick and easy install, as all of my etrailer purchases have been. Looks great on the truck, and functions great with the 180 Degree cover.
# 8
7-Way Molded Trailer Wire Connector - 3' Long
Of the seven wires only two were in the correct position, the ground and the 12volt hot.none of the others matched with the harness on the tow vehicle, which I purchased from etrailer and it was fine.
I've had this in use for over a year and they don't build them like they use to. I use this on a gooseneck trailer and the piece of plastic behind the spade connector for the clearance lights and brakes has melted, allowing the spade connector to lose contact with the plug on the pickup. So the lights would cut off in the middle of the night and would have to wiggle the connection till I could fix it. I have an older Hopkins plug and never had this problem. To fix the problem I ended up putting pieces of thin copper wire behind the spade and have done it twice since the plastic melted a 2nd time and once again the trailer clearance lights would quit working. Attached are before and after pictures.
# 9
Bargman 7-Way Molded Trailer Wire Connector - Double-Ended - 8' Long
This cord has much better connector than most with two sided connectors, most plugs are one sided and just don't connect over time.
As usual with E-Trailer, the connector cable that I needed arrived quickly and was the right part. When I had a question about my toad wiring, they responded with an answer and an instructional video which solved my problem. Their customer service is exceptional and I will continue to do business with E-Trailer.?? G. Rusk 2007 Fleetwood Terra LX 31-M. My toad will be a 2007 Dodge Dakota FWD.
# 10
Hopkins Heavy-Duty Trailer Coiled Wire Adapter for 7-Way to 4-Wire Flat
Item was just as I anticipated. It looks good, works great, and the delivery was as promised. E Trailer is a good place to do business.
Works, exact fit, high quality, coils tight so max of about 3.5’ perfect! Heavy duty wiring, great waterproof connections.
# 11
Bargman 7-Way, RV-Style Connector w/ 6' Long Coiled Cable - Trailer End
I had to replace the old 7 wire cable because the male plug had been pulled off. I chose the WH54006-043 coiled cable. I used a 1/2 inch clamp to hold the cable up at the box and a Connect-to-Protect to hold up the male plug. The result Is clean and tidy. Thank you,
I love having this coiled wiring plug on my trailer. the trailer gets towed with several different vehicles which have their plugs various distances away from the hitch ball. It's so nice to be able to reach the plug wherever it is without worrying about the cord dragging or having to wrap it around something when I don't need that much length. Wiring it up was easy, although I seem to recall that the wire colors don't match the standard that you see most places. That was a very minor hurdle to overcome. A year after install, it's still working great. I'd definitely buy this again if I was wiring another trailer.
# 12
Pollak 7-Pole, RV-Style Trailer Connector Socket w/ Wiring Harness and Mounting Bracket
Installation was easy, good instructions. used this in conjunction with a Prodigy brake controller on a 1973 Chevy K20 square body pickup, replacing my original. wired using crimp on connectors, fast easy, clean. Re taped all connectors and loom. Used silicone on the back of the to seal off moisture.
This is the product I expected and it arrived in factory new condition. To no fault of etrailer.com the currier wagon train and the ox’en that pulled the load were heading East. This was not the direction they were accustomed to so it took a few extra days. All in all good job I will do more business with this company.
# 13
7-Way Molded Trailer Wire Connector, 6' Long
though I'm disappointed with the shipping choice with USPS. etrailer was easy to deal with throughout locating this package. I will order products from your company in the future and choose a better shipping method. Thanks for all your help in this matter.
Great service from Etrailer. PO said Saturday arrival - arrived Thursday! Wish it came with a color code instruction but I’ll replace one wire at a time, color for color. Should be easy enough.
# 14
Mighty Cord Trailer Connector Adapter - 4-Way Flat to 7-Way RV Style - 12" Long
This is my second order with etrailer. Both experiences with your company have been very positive. The knowledge and friendliness -along with following up on orders and satisfaction have been much appreciated. Brittany, the customer representative, is a huge asset to etrailer.
Works well fit perfectly in the factory bracket
# 15
Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket - Vehicle End
I had to replace the socket in my truck after I forgot to disconnect the plug when setting up my camper 1 year ago. Since then, I've connected the camper 35 times and pulled it over 6,000 miles. I have had no issues at all with the new socket.
product from Pollak is always great but they packed it with steel couplers and destroyed it
# 16
Hopkins 7-Way RV Style Trailer Connector w/ LED Test Lights - Trailer End
Easy to wire and very convenient indicator lights. Only thing to be aware of is the power light will stay lit if your trailer has a battery (e.g. a camper) and so it will put a small drain on it. Not really consequential if you're properly taking care of your battery anyway (disconnect or trickle charge when not in use).
This connecter was very easy to install, and the LED display is a great addition.
# 17
Adapter 6-Pole to 7-Pole Trailer Wiring Adapter
This is exactly what I needed, to make my trailer lights work with one of my trucks. It works like a charm!
I was needing a trailer wiring adapter for my 2001 Dodge 1 ton with DewEze bale bed which has a 6 pin round electrical plug and my PJ trailer has a 6 pin flat plugin connector. I could not find one locally and nobody had any knowledge about these. I found etailer website but needed help figuring out what adapter I needed, Jameson C replied to my email with information I needed. Placed my order and received adapter in 3 days. Plugged it into truck and trailer and it works great. Thanks Jameson C and etrailer. Very good customer service. Good price and received quickly. Will definitely be a repeat customer.
# 18
Adapter 7-Pole to 4-Pole and 5-Pole
You don’t often run into a flat 5-pole connector, but it’s nice to have it covered!
I have ordered several items from eTrailer over the last few years. Items are always top quality, including this recent purchase. Customer Service staff are great, and rapid shipping. I could not be happier with my purchases.
# 19
Adapter 7 Pole to 5 Pole Flat Wired Adapter
Well made. Great extension from truck to my boat. Adds an additional 20" of wiring
Nice adapter for my rv to motorcycle trailer. Easy to use and works great.
What our customers are saying:
"very easy to shop"