# 1
Pollak 6-Pole, Round Pin, Plastic Trailer Wiring Socket w/ Rubber Boot - Vehicle End
This part is an exact replacement to the part that failed. The failure was caused by a poor installation which allowed the rubber boot to chaff on the truck frame. As it was an exact replacement installation was straight forward although I modified the mounting bracket to prevent a reoccurrence of the problem.
I found what I thought I needed on the website to prepare our car to be flat towed, but wanted to call to verify. After a short phone call, eTrailer saved me about $50 and got me the stuff I actually needed to get the job done! I won’t shop anywhere else!
# 2
Hopkins 7-Way RV Style Connector with Molded Cable - Trailer End - 8' Long - RV Standard
Çable good but after putting new 7way plug on truck cable wire colors did not match etrailers picture
7 pin connector separated from cable. I was expecting that "Molded Cable" meant that the connector was fused to the cable insulation but instead, the two separated almost immediately after I installed it. It still works fine as the wires are connected securely inside the connector but with the outer covering pulled out like this, I don't think it will last very long.
# 3
Hopkins Endurance Multi-Tow 7-, 5- and 4-Way Flat Trailer Connector - Vehicle End - Ergonomic Design
Works great and etrailer folks did an outstanding job with quick turnaround and communication…thank you!
Exactly what we had been looking for. Now I can hook up multiple trailers with different connectors and all the electrics on each trailer works. I mounted mine directly to the receiver hitch frame. The biggest challenge for us was routing the backup wire from the taillight housing, through the body of the truck to the connector. the rest went together fairly easily. Seems to be pretty solid and looks much better than the loose pigtail connector it replaced.
# 4
Pollak 6-Pole, Round Pin, Trailer Wiring Socket - Vehicle End
Excellent Quick Delivery When you are driving a Test or NASCAR Hauler you need replacement parts very quick, just like a pit stop. Thank You very much for the rapid delivery. Mint Moore III Ford Performance Race Hauler Driver
A great little heavy duty plug that I use to connect my car to the rv when towing 4 down.
# 5
RoadMaster 6-Wire Trailer Connector - Vehicle End
This is a piece of junk….one of the male plugs was broken and I checked the current on the others and no current passed through from one side of the plug to the other. Complete Junk….do not buy this product. I ended up going to [store] and getting a curt plug that worked just fine.
I explained to Roger (I believe was his name) that I have a Blue Ox tow bar and base plate, The base plate was installed along with the wiring kit, but did not include the wire to go from the front of the grill to the interior of my Jeep to plug in my RVi brake, and this is what he sent me. I'm attaching a picture of what I have on my vehicle. Not only was it the completely wrong part, but it arrived in damaged packaging which I did not open. Please send return instructions.
# 6
Pollak 6-Pole, Round Pin, Trailer Wiring Connector - Trailer End
Quick shipping, will order from them again!
Exactly what I needed and It's a great fit
# 7
7-Way Molded Trailer End with 6' Cable - HD Blue Insulated
Love the flexibility of the cord in cold weather. But where the cord connects to the plug, that has seperated. Still working, but do not know how long it will last.
The bargman 7 way moulded trailer end is a high quality unit. I have been using it for a year now and it has performed flawlessly. The sturdy moulded plug ensures no moisture can get inside. Both the insulation of the individual wires and also the outer sheath are made of silicone and remain flexible even at canadian winter temperatures. There is just one way I think the unit could be improved. The outer blue silicone coating is thin, and not very abrasion resistant. If it contacts the grouns at all, it will quickly wear through. Just a little thicker sheath would be nice. Overall I am very happy with my purchase, and would certainly purchase again
# 8
Quick Fix (TM) 4 Pole Flat Car and Trailer Ends
They have just what I needed and it arrived very quickly.
I have used etrailer probably four or five times now and have been very happy. Shipping is fast, prices are reasonable and the products are of good quality. I purchased more of the Quick Fix 4 Pole Trailer Ends - they work really well for the non-automotive industrial control project I am working on.
# 9
Pollak 5-Pole, Round Pin Trailer Wiring Connector - Chrome - Trailer End
Used on a pull behind motorcycle trailer so could go from receiving a 6 pin to a 5 pin. Wired it into loom so can use on more than one motorcycle. Works great. Glad to have found a place that even sold this product.
A similar trailer light connector was installed on my motorcycle cargo trailer when I purchased it way back in 2003. When I purchased my new Gold Wing in 2019, I wanted to use the same type of connector. Since I had to add a new female connector to the bike, I decided to renew the male connector on the trailer. I especially like this connector because it always stays secure when connected. I also wanted the connections to be out of sight when not in use. I have pulled my trailer with this new connection for over 2,500 miles and it has performed great.
# 10
Hopkins Vehicle Wiring Converter with 4-Pole End - Includes Tester and Connectors
This is the perfect solution for the Harley Davidson 5 wire harness, easily lets you convert to 4 pin and stores away when you don't need it.
The product did not work and I have to order another that will work.
# 11
Pollak 5-Pole, Round Pin Trailer Wiring Socket, Concealed Terminals - Chrome - Vehicle End
The pins were too big by a little bit. Had to force the female plug into the socket
I purchased both pieces and got the fifth that I was looking for for my motorcycle. I would recommend this for anyone wanting to wire the motorcycle to pull a trailer.
# 12
RoadMaster 6-Wire Trailer Connector - Trailer End
etrailer videos make things so easy! Thank you!
Worked fine.
# 13
Pollak 6-Pole, Round Pin, Trailer Wiring Socket - Exposed Terminals w/ Rubber Boot -Vehicle End
Used this as the connection point for the Roadmaster diode wiring kit. Seems to be well made and will hopefully last a long time. I did spray paint it flat black so it blends into the front bumper of my “toad” a little better.
The documentation for wiring is limited and difficult to read without magnification. Otherwise this is well made and works perfectly.
# 14
Pollak Heavy-Duty, 4-Pole, Round Pin Trailer Wiring Connector - Metal - Trailer End
Great place for any trailer needs. They alway gave what I want at a good price and fast shipping.
Just what we needed to make a custom harness for our boat trailers that we often tow with light and medium-duty wreckers. No more zip-typing our wireless drag lights to the trailers! Thanks, guys!
What our customers are saying:
"I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future."