Best 2013 Coachmen Mirada Motorhome Trailer Lights

SPLENDID! Popped the old incandescent Side Marker Lights out on my 2008 Triton 21X2 trailer and installed these Thinline LED Clearance and Side Marker Lights (both the AMBER and RED ones). Just Plug-N-Play and my boat trailer looks AWESOME! Shipping was a snap!

Very bright light, same connectors as my 2001 Shoreland'r boat trailer, just had to plug them in. Cannot say enough about the staff at etrailer, very helpful.

I have been more than pleased with the Optronics brand lights! These are no exception! I, like others, am amazed at the brightness of the lights. They are a huge upgrade over my existing incandescent lamps! I really like the way them mate with the mounting brackets and wire connectors. They snap into the brackets securely and can be removed. I also like the matching connectors as they also snap into place securely. I would buy again and I would recommend to others as well!

How do I mount this on my trailer? Is there a mounting bracket/plate/bezzel?

updated our motorhome from the old square type with bulbs to these round type led lights and could not be happier..bright and a more modern look...highly recommended

I have a Newmar coach which I had a LED taillight that burnt out. I called Newmar and checked several other suppliers but no one had the one I needed. I then logged on to etrailer.com, found the exact match, ordered and received it. I’ve used etrailer in the past for towing related items but they will be my first shopping stop for all my RV needs.

I bought these to replace some Bargman 4006001 1311 . They fit really nice. Only issue is the new connectors are too deep, and the lights weren't completely secure because of that. I lost one of them on my first trip out. But I then realized that I could use the old connectors that were a little more shallow. Aside from that, these lights are great and everything is safe and working great.

I used these on my plow truck's new flatbed. I liked that it included the mounting grommets and wiring pig tails. They are working terrific, and look stylish.

The light is used on a boat trailer, and it is not completely sealed. It got water in it, and now it doesn't work any more.

Look good installed. I had a large dent that I needed to deal with, so I cut it out. Wish the backup light was a little brighter, but they do what I wanted them to do. The red X are turn signals / brake lights.

I bought these lights a while ago. I had no problems hooking them up. Easy to install. They are very durable and visible for anyone to see as they drive behind you. Really good for trailers or for any purpose. I do recommend these lights because they are very good lights.

Great dealing with etrailer! Always good service and quick shipping. Products always as advertised.

Worked great on our motorhome.

Product worked perfectly for what we were using it for. I purchased a motorcycle and needed to move the license plate bracket to be able to add bags. I found your bracket online, knowing we were going to have to jerry rig it to where we wanted to mount it. I was a little suprised the bracket was plastic when I received it, but still worked great. A friend made 2 mounting brackets from a flat bar, cutting and bending them to the length and angle we needed. Drilled holes and mounted them under the rear fender. Mounted the license plate bracket on the other ends of the custom brackets and wired it in for lights.

This is a good quality light, water tight and worked well. It has been on the trailer for over a year now and still has no issues. The lens can interchange on other similar bases, but if the base is old and damaged like mine was, this is a great replacement.

Easy replacement for my Thor Hurricane back lights.

The light assemblys ordered were back ordered but shipped to me as soon as they were available. The fit was perfect. Had some problems with the wiring,the coach had 8 wires and the assy had 6. Once figured out the install went quickly. Perfect match.

Command Triple LED Tail Light Review They work great once they are installed. I have 2002 Gulf Stream Ultra on a Ford E450 Frame. The problem is the actual installation. Command does not include install instructions. What may needed if converting from incandescent bulb to a LED system is a 12 Volt 50 Watt 6 Ohm resistor. Installing a resistor parallel between the Brake/signal and Common wire will be necessary to overcome the hyper-flasher bulb out detection system. This high power resistor needs to be mounted on a metal surface to help disapate the heat created. In my case, I mounted the resistor to 3/4 metal pipe banding. The resistor was suspended so that is would have great air flow. Furthermore, size of the light should be slightly larger than 14 w x 6 7/8 . In my case the tail light was not big enough to cover the old light screw holes. I made this work by centering the light and using lap sealant as a finishing water proof bead. After a long road trip and many signal turns and brake presses the tail lights do look and work great.

Terrible quality…lenses will not stay snapped on. The lock system on these is a joke. Very disappointed in these lights.

Perfect updated Tailight Assembly. Same brand name as the original, for my 18'-6" Rockwood Minilite Travel Trailer

Etrailer had an exact replacement for my rv taillight, shipping was quick

I needed a tail/stop light for the rear of my Fairmont railway motorcar and thought from your on-line description that this product would be satisfactory. I was right, it is a good size and bright enough to be very visible in bright sunlight. As you can see from the pictures, to make it match aesthetically I attached the lamp to an aluminum plate cut to fit in an old auxiliary lamp housing. The railway car runs in both directions hence has head and tail lights on both ends. I am very satisfied with this light.