# 1
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
What can you say about a good piece of hardware. As for service, it was prompt and accurate!
I bought my hitch not for towing but to protect my bumpers from scratches. Everything came on time, fits as advertised and I might even actually tow something now that its on.
# 2
Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
What can you say about a good piece of hardware. As for service, it was prompt and accurate!
# 3
Curt Class I Drawbar - 5" Rise - 9-9/16" Long - 2,000 lbs
Overall everything has worked as it should. My only complaint would be that I have pretty much always had some wobble/looseness of the drawbar in the receiver. It is actually audible when driving. I was in the process of buying, and selling a house when I installed the trailer hitch, so the issue was overlooked due to the complexity of the move. I guess I learned to live with it, and hope it doesn't ever cause a failure.
The hitch fit perfectly and the wiring kit was easy to install. I used a class II hitch on a 2014 Scion xB with a Curt T-Connector 4-Pole wiring kit. I use this setup to haul an 4' x 8' harbor freight trailer and can easily make runs to home depot with loads nearing 1000 lbs. I don't miss my truck at all now.
# 4
Curt Drawbar for 1-1/4" Hitches - 5-3/8" Rise, 6" Drop - 5-9/16" Long - 2K
I used this on a 2014 Ford Fusion with a Reese receiver hitch made for my vehicle. Either the neck of the drop hitch is not long enough to get the ball a few inches away from the vehicle or the Reese receiver hitch sits too far under the vehicle.
Untried as of yet but looks like a quality product. It's difficult to provide an accurate review of a product one just received, but I was very impressed at how quickly my order arrived (days before the expected arrival date), as well as the ease of ordering, the price, and the follow up.
# 5
Curt Class I Drawbar - 5" Rise - 11-9/16" Long - 2,000 lbs
Overall everything has worked as it should. My only complaint would be that I have pretty much always had some wobble/looseness of the drawbar in the receiver. It is actually audible when driving. I was in the process of buying, and selling a house when I installed the trailer hitch, so the issue was overlooked due to the complexity of the move. I guess I learned to live with it, and hope it doesn't ever cause a failure.
The hitch fit perfectly and the wiring kit was easy to install. I used a class II hitch on a 2014 Scion xB with a Curt T-Connector 4-Pole wiring kit. I use this setup to haul an 4' x 8' harbor freight trailer and can easily make runs to home depot with loads nearing 1000 lbs. I don't miss my truck at all now.
# 6
Curt Class I Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 2,000 lbs
Overall everything has worked as it should. My only complaint would be that I have pretty much always had some wobble/looseness of the drawbar in the receiver. It is actually audible when driving. I was in the process of buying, and selling a house when I installed the trailer hitch, so the issue was overlooked due to the complexity of the move. I guess I learned to live with it, and hope it doesn't ever cause a failure.
The hitch fit perfectly and the wiring kit was easy to install. I used a class II hitch on a 2014 Scion xB with a Curt T-Connector 4-Pole wiring kit. I use this setup to haul an 4' x 8' harbor freight trailer and can easily make runs to home depot with loads nearing 1000 lbs. I don't miss my truck at all now.
# 7
Curt Class I Drawbar - 5/8" Rise, 1-1/4" Drop - 6-3/4" Long - 2,000 lbs
Overall everything has worked as it should. My only complaint would be that I have pretty much always had some wobble/looseness of the drawbar in the receiver. It is actually audible when driving. I was in the process of buying, and selling a house when I installed the trailer hitch, so the issue was overlooked due to the complexity of the move. I guess I learned to live with it, and hope it doesn't ever cause a failure.
The hitch fit perfectly and the wiring kit was easy to install. I used a class II hitch on a 2014 Scion xB with a Curt T-Connector 4-Pole wiring kit. I use this setup to haul an 4' x 8' harbor freight trailer and can easily make runs to home depot with loads nearing 1000 lbs. I don't miss my truck at all now.
# 8
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise - 6-5/8" Long - 2,000 lbs
What can you say about a good piece of hardware. As for service, it was prompt and accurate!
I bought my hitch not for towing but to protect my bumpers from scratches. Everything came on time, fits as advertised and I might even actually tow something now that its on.
# 9
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise - 9-3/4" Long - 2,000 lbs
What can you say about a good piece of hardware. As for service, it was prompt and accurate!
I bought my hitch not for towing but to protect my bumpers from scratches. Everything came on time, fits as advertised and I might even actually tow something now that its on.
# 10
Curt Class I Drawbar - 4" Rise - 9" Long - 2,000 lbs
Overall everything has worked as it should. My only complaint would be that I have pretty much always had some wobble/looseness of the drawbar in the receiver. It is actually audible when driving. I was in the process of buying, and selling a house when I installed the trailer hitch, so the issue was overlooked due to the complexity of the move. I guess I learned to live with it, and hope it doesn't ever cause a failure.
i like this product its made heavy duty
# 11
Curt Class I Drawbar - 2-5/8" Rise, 3-1/4" Drop - 9-3/8" Long - 2,000 lbs
Overall everything has worked as it should. My only complaint would be that I have pretty much always had some wobble/looseness of the drawbar in the receiver. It is actually audible when driving. I was in the process of buying, and selling a house when I installed the trailer hitch, so the issue was overlooked due to the complexity of the move. I guess I learned to live with it, and hope it doesn't ever cause a failure.
The hitch fit perfectly and the wiring kit was easy to install. I used a class II hitch on a 2014 Scion xB with a Curt T-Connector 4-Pole wiring kit. I use this setup to haul an 4' x 8' harbor freight trailer and can easily make runs to home depot with loads nearing 1000 lbs. I don't miss my truck at all now.
# 12
Curt Class I Drawbar - 2-5/8" Rise, 3-1/4" Drop - 6-1/4" Long - 2,000 lbs
Overall everything has worked as it should. My only complaint would be that I have pretty much always had some wobble/looseness of the drawbar in the receiver. It is actually audible when driving. I was in the process of buying, and selling a house when I installed the trailer hitch, so the issue was overlooked due to the complexity of the move. I guess I learned to live with it, and hope it doesn't ever cause a failure.
The hitch fit perfectly and the wiring kit was easy to install. I used a class II hitch on a 2014 Scion xB with a Curt T-Connector 4-Pole wiring kit. I use this setup to haul an 4' x 8' harbor freight trailer and can easily make runs to home depot with loads nearing 1000 lbs. I don't miss my truck at all now.
What our customers are saying:
"Excellent order notification process. They tell you when they get your order, when it will be filled, when it will ship, when it ships. Solid."