Most Popular Dexter for 2003 Ford Excursion

New suspension parts made a real difference in trailer handling. Original shackles holes were severely elongated, spring eye mounts were also needing attention. Thank you, etrailer for the needed parts and support.

Added a third 7000 lb axle to our 14000 lb trailer. Easy to install, fit perfectly. Handles the weight better.

If I were to rate this product I would want to say it was better than excellent. Very impressed with your products. definitely beyond my expectation. If fact I ordered brakes for the trailer the very day I received slipper springs kit.

Exactly what I needed, such an easy upgrade with new heavier springs and the wet bolt upgrade kit. etrailer techs helped answer some questions to be sure I got exactly what I needed.

Replaced 50 year old u Bolts on my horse trailer. Fit like a glove, no issues with install and everything fit as it should.

This trailer sees some use off pavement. The added ground clearance provided by the kit is very helpful. The lifting blocks are well constructed and the hardware is high quality. Installation was straightforward, but great care must be taken when lifting the trailer off the ground to remove the axles and also to ensure that the new fasteners are tightened properly. Not a job for inexperienced mechanics.

This kit arrived packaged very well and exactly as described. Inventory of included parts complete. It will be a straight forward job to install and solve my problem of having the trailer too low at the rear since I can't lower my hitch any further. I recently replaced both 20 year old Dexter #10 Torflex axles with 10 deg down vs 0 deg down spindles. I am glad for the improved ride instead of basically a solid axle, but still needed this kit to solve the angle of the trailer because I'm as low as I can go with my weight distribution hitch at the ball.

This product did exactly what we needed it to. Bought a replacement axle from Dexter but it created clearance issues in the wheel wells. After installing this kit we have much more clearance and the trailer rides like a dream.

Outstanding product. I am so grateful the install video was added to the page. I am a hands on individual and struggle reading directions with numerous steps at times and it made it so much easier to install this. The explanation of how the mount has to sit flush with the axle seat once you tighten down the spacers was very helpful during the alignment stage. I still have to weld the brackets to the axle for extra support as recommended but I did notice that I will be gaining roughly 4” of clearance height to my trailer. This will allow me to sit more evenly with my lifted truck and get my trailer in my driveway easier since I have a water drainage built in to the entrance way with a big dip.

Kit worked as intended. Raised my fifth wheel high enough to get proper clearance over bed on new truck 3" Axle tube 2.5" Spring stack gave me 5.5" of additional height. I also added bump stops on top side just in case a spring breaks.

Jaime at ETrailer was extremely helpful and got my order sent up ups ground since I was having issues using a P.O. Box. My parts arrived quickly and fit perfectly. I installed them last week and my trailer looks so much better and won’t be scraping on my driveway anymore!

Dexter kit looks and feels robust! Can’t wait to put it on and see the results. Did have one of the shackles that would not fit and Etrailer customer service was Awesome! Sent what I needed right away. Will be buying from Etrailer again!

Upgrade for my trailer with worn bushings and no lube points. The rubber on these equalizers along with the wet bolts and bushings eliminate the squeaks and creaks on my trailer.

The holes to mount to top of axle fit fine. It's the holes the mount on the side, to the frame bracket are filled too low. They're off by half a diameter.

I purchased this item for 2015 micro mini with torsion axles.Simply put, the suspension lift for this trailer is no longer available.Three of the holes lined up perfectly.The 2 bottom holes and the one front one that bolts to the trailer. With an angle grinder, I cut the button rail of the lift kit with an angle gri der and had to drill the top hole of the bracket on the trailer to install the fourth screw and torque all bolts. It fits and operates perfectly and my minor mini went from 6 inches of ground clearance to 9 inches of clearance at the lowest part of the trailer. A beautiful retro fit for an item that is no longer available for purchase anywhere!!! If.your handy with an and grinder this modification is possible with this kit and well worth it!!! Sorry no photos as of yet.

The Dexter Heavy-Duty Suspension Kit was an Exact Replacement, and a Perfect Fit for my RV Trailer. They were a much more substantial replacement for my factory parts. The bronze bushings, and wet bolts will definitely help my suspension last a long time due to being able to lubricate all of the bushings and pivot points, which will ensure worry free traveling.

I would have given a 5 if the zurk fittings were better quality, one grease (zerk) fitting was damaged and missing the ball, so I had to get one from the hardware store. Put better grease fittings in and there wouldn't be any complaints about not taking grease.

Great replacement for cheap lippert products

My wife and I installed the Dexter EZ Flex Suspension kit on Grand Desin Imagine RV Thursday, July 18th, 2024. It took us about 6 hours but some of that time was getting our RV trailer jacked up and secured with jack stands. After the installation we greased all the wet bolts and the fittings on the EZ Flex equalizer. One problem we have is there is one Wet bolt that will not take grease, after several attempts. All others accepted grease but this one. We’re wondering if this one wet bolt is bad.