# 1
Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In
I plugged it in, just as described on a YouTube video, and all seems perfect. There were no specific instructions in the package for my application (2013 Ram 1500). In defense however, the connectors are not interchangeable so there was really no way to connect it wrong. Plenty of extra length wire to work with. The worst part was getting under the dash!
Great customer support during the ordering and installation process. Installation was on a 2014 Ram 1500 using an existing controller.
# 2
Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In
Speed up install
Sorry for the late follow-up. I just wanted to let you know that the brake controller and wiring harness I purchased through eTrailer worked very well with my 2008 Dodge Ram 2500 with the Cummins 6.7L diesel. Pictures are attached for your use, as required. The trailer was an 18-foot enclosed snow machine tailer with a steel chassis. I can't remember the empty weight, but it's substantial. We towed empty and full on dry and snow covered roads from Oklahoma to Colorado and back. Even with th exhaust brake on my truck, I can't imagine towing this load through the hills and mountains without a brake controller. It's been done before, but I would say it's an unnecessary risk given the more than reasonable prices at eTrailer...it was cheap insurance pulling such a heavy rig with my family on board. The controller was definitely not your top-of-the-line model, but the adjustability and controls were more than adequate for somebody who tows occasionally. A professional may desire more proportional controls and adjustability, but not much more. This unit peformed flawlessly. Thank you for your time. Please feel free to contct me if you would like any clarification on my statements or pictures.
# 3
Great product if you plan to add multiple connectors on your trailer. Allows you to tie in the two connector cables into the wire harness of the trailer itself and have all the connections easy to access. Also allows you to add circuits as easily as crimping on some more ring terminals and adding the wires. Keeps all the connections neat and tidy. A must if you have brakes and plan to use then with a vehicle that has a brake controller module, and on a vehicle that has the flat four only connector. I can tow my flatbed with either of my trucks and connect the trailer to either connector with no adapters.
I was rewiring a trailer for a seven-prong harness, and used this junction box after watching a video on the etrailer site. Made the job easier, and now if I want to add some wiring, I can just go to the box and add it.
# 4
Dielectric Grease for Electrical Connectors, 2 oz.
I ordered the Mighty Cord 5th Wheel/gooseneck 7-way wiring harness for my 2018 Ram 3500. The installation was quick and easy. Thank you etrailer.com for the great products, fast shipping, and commitment to making my life easy.
I've been using this product for many years. Put it on any electrical system to cut down on corrosion. I put it on Bulb sockets, Battery terminals, all of my R/V plugs and sockets. Works great. Thank you for another GREAT product etrailer!!
# 5
Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In
You wouldn't think an adapter cable to mate a CURT brake controller to a 2010 RAM, factory installed trailer brake cable would be difficult. But another online retailer and 2 (TWO!) local RV dealers sold me the wrong one..each the same; but wrong! Only etrailer got it right and at a fraction of the cost of the "others"! Works fine.
I purchased this product with a Curt time delay brake controller. My 2010 Dodge Ram has the 7 way plug and towing package on it already which made the installation of the product super easy. I looked under the dash by the parking brake and there was the plug. I plugged it in and plugged in the controller, mounted it and I was done! Installation took me less than 12 minutes and that included me checking the plug with a multi meter to ensure the power was getting thru. The best part is I can remove the controller when I am not towing my RV so that I keep my stock appearance. If you can use this part on your truck pay the little extra and get it. The shipping was super fast and easy! One of the best experiences buying online!
# 6
Replacement Brake Control Plug-In Harness for Tekonsha and Draw-Tite Brake Controller 12" Long
I have an electronic brake controller that I move between vehicles depending on which one I'm using. In order to wire them all, I needed this wiring piece to complete the wiring. Nothing fancy, but it works perfectly.
Exactly what I was looking for and needed ! It was delivered very quick . Actually I just ordered a complete wiring harness from you tonight . Your service and follow up is great
# 7
Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In
Installed on a 2014 dodge ram 1500... The wires took literally 2 seconds to find under the dash, per etrailers instructional video, and took another to 2 seconds to clip on the pigtail. Hooked up the brake controller and powered up fine. Haven't got a chance to use it yet since the car hauler is about 400 ft back on the property and I got the truck stuck going back to try and get it. Its awdul muddy here in michigan in April. Hopefully some warm weather soon so I can get to it and try this controller out! I ordered it on Wednesday, did 2nd day shipping and called to insure I could receive it by Friday, the lady on the phone had them ship it, within ten minutes I had a confirmation email.
electric brake control for 2014 ram 1500 this Curt electric brake control unit and harness fit great . half hour and it's finished.
# 8
Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead
fits sealed beam bulb ordered with plugs.
Fast shipping good prices
# 9
Universal Wiring Adapter for Curt Trailer Brake Controllers
I have the Dodge Ram Truck 94 model with factory wire 7 connector plug. This is the truck that many people can't find the blue wire under the dash. 94 model didn't come with a factory wire plug under the dash like later models have. I found the wire tape to the main wiring harness about two inches from the fire wall to the right of the emergency brake paddle. This harness worked great
# 10
Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 6" Lead
I must drive at least 100 miles one way for any major and some minor parts. Thanks to etrailer I can receive any part very quickly and be back on the road! etrailer prices are very reasonable! I bought a new gooseneck to fifth wheel adapter, well made heavy duty! Thanks for etrailer!!!!
Fast shipping good prices
Trailer Wiring Harness Adapter Installation - 2001 Dodge Ram Pickup
Today on our 2001 Dodge Ram pickup we're going to review and install the Hopkins adapter wiring converter from 4-pole to 7-pole round with 4-pole flat, part number 37185. Now here's what our Hopkins wiring adapter is going to look like once it's installed. The wiring adapter will take the 4-pole flat trailer connector wiring and turn it into a 7-blade connector. Not only can we use a 7-blade connector with this application, but also our standard 4-flat trailer connector. Now let's go ahead and show you how to install it. To begin our install we're going to attach the mounting bracket to the bottom of the bumper for our new 7-pole connector. Using the pre-drilled holes in the bracket and a couple self-tapping screws, we can secure it directly here to the bottom of the steel bumper.
What our customers are saying:
"Very broad selection and outstanding service."