Most Popular Weld-On for 2000 Ford Excursion

if I had to rate this upgrade in difficulty one being the easiest five being the hardest, it would be a one. Super simple. Take the nuts and bolts off your old hardware and install the upgrade in its place. I read some of the reviews were people were annoyed with the counter clockwise rotation and the bolt sticking out too far. I really didn’t see a problem with either. I know you’re not supposed to use a drill to extend and retract these but I always have. I suppose as long as you’re not torquing the heck out of the adjustment screw you shouldn’t have any problems. I always put a small flat 2 x 6 piece of wood under the foot of each one of these. It seems to add quite a bit of stability.

The jacks themselves have worked great, they keep the trailer level and solid during our concession events. I just had them mounted to the trailer so I don't have to put them in and out at each event. The jack handles leave a bit to be desired so I use a 20v drill w/ a 3/4" socket to run them up and down.

Fantastic heavy duty product and works great.

After receiving the packages was very severely damaged and there was no Jack.Stand crank and no nuts and bolts.Don't know what else I miss

I drilled two 3/8" holes in the top of the rail and used two stainless bolts to hold it on. Works very well for this application. It folds and holds the trailer for loading, and if I have to leave it somewhere, and don't want the tongue sitting on the ground. I used it on a Harbor Freight 4x4 trailer I am building to pull with my Can-Am Spyder. Love it!!!

I purchased this jack for my 2010 Escapade Elite trailer. I finally installed it yesterday. After a quick and minor modification, it fits great and funcltions like a charm. I highly recommend this product to other MC trailer owners. Thanks, etrailer.com for the quality and price!

Customer service from e-trailer has been top notch both times I purchased from them. I highly recommend this company for your travel trailer needs.

Works great for my teardrop

Order Thurs, delivered Sat 2 days ahead of schedule. Box in good condition. All parts present. Instructions clear. Replaced 3 yr old jack (locked up). Found lower price by $20 on Amazon, chose etrailer instead for the videos and hometown presales customer service people like Kimberly. Worth the extra. Can't always be about the green. Made sure to scrape paint of all surfaces as per instructions for the ground. Installed day of receipt and works great. Looking forward to the 1, 2 and 3 year hopefully positive reviews.

Put this jack on the trailer tongue in less than an hour. Moves the tongue of a 29' 6500 lb travel trailer up and down easily. I did not find it particularly slow. Install tips: I used a two ton bottle jack and static jack stand to support the tongue while working. Check trailer negative grounding with a voltage tester, just to be sure you get a good circuit. I attached power cord via fuse directly to positive battery terminal and stowed the extra wire/fuse in the battery box. (My trailer has a power line and blade-fuse from the trailer's junction box for the previous jack but it had an occasional short so I didn't use it. If your trailer has a dependable powerline for a jack, use it.) I'm putting a 10L dry-sack over the powerhead to keep out rain, road dirt and bugs. An extra layer of protection never hurts. I hope this holds up better than the factory installed L*****t. I'll write a follow up review in a year or so. And as always, thanks etrailer for great service, great prices, and fast shipping.

The product is easy to install. It should be redesigned to allow more space between the trailer and the ground pad when in the travel position. There is interference between the pad and trailer that does not allow full locking in the travel slot. See pictures. A spacer for mounting would improve this feature.

I'm using the jacks to level the tailgate on my trailer so it can be used as a deck. They are easy to adjust for terrain variations

Makes it easy to level 5th wheel with the Level-Mate Pro.

I really enjoyed working with Lauren she really knows the product line and the Ultra fab landing gear work far better than I expected. I have a 2019 Genis Supreme 33CKXL I highly recommend this product.

Fast Shipping and delivery, worked great as replacements for my old worn out stabilizers

Quick shipping. I will be ordering more parts as I need them for our RV.

Landing gear was exactly what I ordered. Prompt delivery. Package was perfect. Landing gear just not as heavy duty as I hoped. I'm sure I will be replacing it again in a few years.

Jacks has functioned very good over the last year. No problems or issues encountered .