# 1
Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
Worked well, and the locking nuts with it are great
Great Experience! When I noticed that the leaf springs on my 44 year old boat trailer had cracked I thought I would never find replacements. I fully expected to have to have something custom built. I was amazed when I found the fantastic diagrams/descriptions dimensions for replacement springs on etrailer.com The phone support person was wonderfully helpful in confirming if items were in stock and ready to ship. The replacement springs arrived on time and everything bolted up perfectly! Thanks for such a great site!
# 2
Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
Bought many parts, wheels & tires for a small horse trailer restoration project. Received everything purchased quick and all parts were perfect. Made the job go as smoothly as a 25 year old trailer restoration can go.
-I buy Parts and Supplies from ETRAILER all of the time, to support my large fleet of pickup trucks and 20 trailers. -The Postal Service damaged this package and lost the product. -Staff at ETRAILER promptly shipped-out replacements. (Thank you.) *ETRAILER shipped with USPS Ground Advantage which automatically comes with $100 insurance, which will cover the loss of this product. -I have no reason at all, to complain about the ETRAILER Staff, their Service, nor their Products. -G.
# 3
2" Square Trailer U-Bolt (Qty 2)
Melissa T Provided excellent customer service. I Would recommend to everyone use etrailer.
Great Experience! When I noticed that the leaf springs on my 44 year old boat trailer had cracked I thought I would never find replacements. I fully expected to have to have something custom built. I was amazed when I found the fantastic diagrams/descriptions dimensions for replacement springs on etrailer.com The phone support person was wonderfully helpful in confirming if items were in stock and ready to ship. The replacement springs arrived on time and everything bolted up perfectly! Thanks for such a great site!
# 4
Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
The wet bolts were just fine. But the "locking nuts" with the crimped edges were aweful. The 3 dimples each nut has were not useful. Many of the nuts I could use my fingers to spin them on the bolts. Never had locking pressure. I ended up going to local hardware store for much better locking nuts.
Quick delivery and parts were as they should be. Customer service was top shelf.
# 5
Replacement U-Bolt with Nuts for 1-3/4" Wide, Square Trailer Axles - 9/16" Diameter
They got here, they fit!
eTrailer always come through with the right parts at good prices. I've found needful items at eTrailer difficult to source anywhere else.
# 6
Front/Center/Rear Hanger for Double-Eye Springs - 2-3/8" Tall - 9/16" Bolt Hole
they were not what I thought they were, so I did not use them. They sit on my shelf. Maybe someday I can use them on something else.
Good steel. Just not bent enough. Measures 3/8” wider at the open end. Just extra work tightening the bolts but not a huge deal
# 7
Replacement U-Bolt w/Nuts for 7,500-lb, Round Trailer Axles - 9/16" Diameter
I had a hard time finding a u-bolt that would fit my vintage trailer. These were the perfect width but too long. I cut them to size and they fit perfectly. These were the only u-bolts I could find that would fit my leaf springs. They are good quality and have held up nicely. I just wish they made this size shorter.
I had to replace the springs on my trailer because of a wheel coming off. Etrailer had exactly what I needed, shipped quickly, and made in the USA (which is important to me). Any other parts I need for trailers will be ordered through them. Go USA.
# 8
U-Bolt Plate for 2" Square Axle - 1-3/4", 2" Springs - 9/16" Bolts
Great Experience! When I noticed that the leaf springs on my 44 year old boat trailer had cracked I thought I would never find replacements. I fully expected to have to have something custom built. I was amazed when I found the fantastic diagrams/descriptions dimensions for replacement springs on etrailer.com The phone support person was wonderfully helpful in confirming if items were in stock and ready to ship. The replacement springs arrived on time and everything bolted up perfectly! Thanks for such a great site!
Had a leaf spring break on my off-road trailer in Mexico. Left it at a boat yard until I received the parts from trailer & returned to replace. Only took 2 hrs to replace both leafsprinhs, shackles, bolts etc. And we were back on the road.
# 9
Rear Hanger with Bushing for Single Axle Trailer Suspensions with 1-3/4" Double Eye Springs
Well made product and prompt shipment. Thanks, Jim G.
I think etrailer is Great. I think their customer service is fantastic. My wife and I were in Arkansas, 1200 miles from our home in Ft. Myers Florida. I replaced the original springs on our trailer with new heavy duty springs, but never changed the hangers or bolts. Our trailer was riding very poorly, we needed new hangers and bolts badly because we were headed on a very long 9000-mile trip with many stops all the way to the Monterey CA. etrailer found us a UPS Store along our route to send us the parts that we needed. Many thanks to etrailer for great parts and Fantastic customer service and for helping us with our most Wonderful Adventure!
# 10
Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole
Overall, the brackets are as specified and appear to be a quality metal. I’m not sure if it’s by design, but the inside width of the legs at the bolt holes are slightly wider (1/8”) than the inside width at the top at the bend. But I guess that is better than it being tighter to get the leaf spring into it.
I only received the spring hanger, but not the suspension kit both ordered and picked at same time. I’m still waiting on the moride suspension kit
# 11
Front/Rear Hanger for Double-Eye Springs - 1-5/16" Tall - 9/16" Bolt Hole
This is a multiple product review. The long bracket are good. The shorter brackets are of the same good quality. The issue is using the short brackets with the shackles. The shorter brackets could be narrower so the shackle line up better with spring and other longer bracket. We used washers to make it align better. The greasing bolts are good, but could be longer. so we could only use 2 of the 6 and had to use normal grade 8 bolts.
It is always easy to find what I need on there site and the shipping is fast I highly recommend etrailer
# 12
Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
Ideally, the shoulder of the bolts should be long enough to extend all the way through the spring and shackle so that the threads are not subject to load or moving parts. The treads are the weakest portion of any bolt and should only be exposed to tension, not sheer loads. This being trailer hardware, I guess that design factor is not a high priority. Just seems like it could be done right with just a smidge more effort or consideration. That said, the original bolts I removed had only a slightly longer shoulder and one-half the shackle was riding on threads and it held up for years, although it was worn considerably more in the threads.
I don't write many reviews--usually only when something is really bad or really good. I have been rebuilding a trailer and this is only my second order from etrailer.com. Their service is unmatched by any company I have dealt with in a long time. I will continue to do business with them.
What our customers are saying:
"I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future."